Interfaces

Physical and virtual interfaces allow traffic to flow between internal networks, and between the internet and internal networks. FortiIsolator has options for setting up interfaces and groups of subnet works that can scale as your organization grows.

Setting the management IP address

The default management interface on FortiIsolator is set to 192.168.1.99. To change the Management IP address from GUI:

1. Go to Portal > Network > Interface.
2. Edit the existing Gateway or create a new one.
3. Select mgmt. interface and then edit it.
4. Follow IPv4 address with subnet format: e.g. 192.168.1.99/255.255.255.0.

To change the Management IP address from CLI, use the following command:

> set mgmt-ip <ip_address>/<subnet_mask>

e.g.

> set mgmt-ip 192.168.1.99/24

Setting the internal IP address and gateway

There is no default Internal interface on FortiIsolator. To setup the internal IP address from GUI:

1. Go to Portal > Network > Interface.
2. Select Internal interface and then Edit it.
3. Follow IPv4 address with subnet format: e.g. 192.168.2.99/255.255.255.0.

To change the internal IP address from CLI, use the following command:

> set internal-ip <ip_address>/<subnet_mask>

e.g.

> set internal-ip 192.168.2.99/24

Setting the external IP address and gateway

There is no default external interface on FortiIsolator. To setup the external IP address from GUI:

1. Go to Portal > Network > Interface.
2. Select External interface and then edit it.
3. Follow IPv4 address with subnet format: e.g. 192.168.3.99/255.255.255.0.

To change the external IP address from CLI, use the following command:

> set external-ip <ip_address>/<subnet_mask>

e.g.

> set external-ip 192.168.3.99/24

Setting the HA IP address and gateway

There is no default HA interface on FortiIsolator. To setup the HA IP address from GUI:

1. Go to Portal > Network > Interface.
2. Select HA interface and then edit it.
3. Follow IPv4 address with subnet format: e.g. 192.168.4.99/255.255.255.0.

To change the HA IP address from CLI, use the following command:

> set ha-ip <ip_address>/<subnet_mask>

e.g.

> set ha-ip 192.168.3.99/24