Upgrading Firmware
Run the execute restore image
command to upgrade the firmware. The firmware image is loaded from an FTP server or a TFTP server. For example, run execute restore image ftp <FortiGuest Image location> <FTP Server IP> <username> <password>
command, where:
-
<FortiGuest Image location>
is the path to the FortiGuest firmware image on the FTP server. -
<FTP Server IP>
is the IP address of the FTP server. -
<username>
is the username for the FTP server. -
<password>
is the password for the FTP server.
For complete list of supported commands, see Command Line Interface (CLI) Reference