Application Commands
You can perform specific operations on the FortiGuest application using these commands.
app upgrade
This command upgrades the FortiGuest application to a newer version.
Syntax
app upgrade scp://user1@10.35.2.2:/home/user1/Desktop/fortiguest-v1.0.0-build0002-docker.tar.xz
Output
fortiguest> app upgrade scp://user1@10.35.2.2:/home/user1/Desktop/fortiguest-v1.0.0-build0002-docker.tar.xz
Fortiguest application upgrade
The authenticity of host '10.35.2.2 (10.35.2.2)' can't be established.
ED25519 key fingerprint is SHA256:bU7mtIeahe+c7avCYjPyrgbrviqVCsvC9gvz/0ufd4U.
This key is not known by any other names
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added '10.35.2.2' (ED25519) to the list of known hosts.
user1@10.35.2.2's password:
fortiguest-v1.0.0-build0002-docker.tar.xz 100% 175MB 202.5MB/s 00:00
fortiguest application copied Successfully.
app show
This command displays the version information of FortiGuest.
Syntax
app show
Output
fortiguest> app show
The following fortiguest applications are in system.
1 v1.0.0-dev9998
2 v1.0.0-build0002
Running Version : v1.0.0-build0002
Fortiguest application show Successful.
app delete
This command deletes the FortiGuest application from the system.
Syntax
app delete
For example, specify the required FortiGuest version to delete.
fortiguest> app delete
The following fortiguest applications are in the system.
1 v1.0.0-dev9998
2 v1.0.0-build0002
No fortiguest application is running
app start
This command starts the FortiGuest application.
Syntax
app start
Output
fortiguest> app start
The following fortiguest applications are in system.
1 v1.0.0-build0004
No fortiguest application is running
Enter fortiguest application version to start: v1.0.0-build0004
There are no fortiguest applications running
Starting fortiguest application v1.0.0-build0004
Building with native build. Learn about native build in Compose here: https://docs.docker.com/go/compose-native-build/
Starting fortiguest-v100-build0004_fortiguest_1 ... done
Started fortiguest application v1.0.0-build0004Fortiguest application started Successfully.
app stop
This command stops the FortiGuest application running in the system.
Syntax
app stop
Output
fortiguest> app stop
fortiguest v1.0.0-build0002 is running, do you want to stop [yes/no]?: yes
fortiguest-v100-build0002_fortiguest_1
Stopped fortiguest application v1.0.0-build0002
Fortiguest application stopped.
Note: A maximum of two images can be copied into the application.
Set interface ipv4
This command changes the IPv4 address.
Syntax
set interface ipv4
Output
fortiguest> set interface ipv4
Setting IPv4 address
Enter new IPv4 Address [10.35.2.1]: 10.35.2.7
Enter Subnet Mask: [255.255.255.192]: 255.255.255.192
Enter Gateway IP Address [10.35.2.1]: 10.35.2.1
fortiguest-v100-dev0031_fortiguest_1
Stopped fortiguest application v1.0.0-dev0031
Stopping dockerd:
Please access system using new IP or Hostname address.
Reconfiguring network interfaces...
Note: Changing the IP address requires a service restart.