config system icond

This command is available for model(s): FortiGateRugged 50G 5G, FortiGateRugged 60F 3G4G, FortiGateRugged 60F Gen2, FortiGateRugged 70F 3G4G, FortiGateRugged 70F, FortiGateRugged 70G 5G Dual, FortiGateRugged 70G.

It is not available for: FortiGate 1000D, FortiGate 1000F, FortiGate 1001F, FortiGate 100F, FortiGate 101F Gen2, FortiGate 1100E, FortiGate 1101E, FortiGate 120G, FortiGate 121G, FortiGate 1800F, FortiGate 1801F, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 200G, FortiGate 201E, FortiGate 201F, FortiGate 201G, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 2600F, FortiGate 2601F, FortiGate 3000D, FortiGate 3000F, FortiGate 3001F, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3200F, FortiGate 3201F Gen2, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F Gen2, FortiGate 3501F Gen2, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3700F, FortiGate 3701F, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 400F, FortiGate 401E, FortiGate 401F, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F Gen2, FortiGate 4400F, FortiGate 4401F Gen2, FortiGate 4800F, FortiGate 4801F, FortiGate 5001E1, FortiGate 5001E, FortiGate 500E, FortiGate 501E, FortiGate 50G 5G, FortiGate 50G DSL, FortiGate 50G SFP-POE, FortiGate 50G SFP, FortiGate 50G, FortiGate 51G 5G, FortiGate 51G SFP-POE, FortiGate 51G, FortiGate 600E, FortiGate 600F, FortiGate 601E, FortiGate 601F, FortiGate 60F, FortiGate 61F, FortiGate 70F, FortiGate 70G-POE, FortiGate 70G, FortiGate 71F, FortiGate 71G-POE, FortiGate 71G, FortiGate 800D, FortiGate 80F Bypass, FortiGate 80F DSL, FortiGate 80F Gen2, FortiGate 80F-POE, FortiGate 81F Gen2, FortiGate 81F-POE, FortiGate 900D, FortiGate 900G, FortiGate 901G, FortiGate 90G Gen2, FortiGate 90G, FortiGate 91G Gen2, FortiGate 91G, FortiGate-VM64 Aliyun, FortiGate-VM64 AWS, FortiGate-VM64 Azure, FortiGate-VM64 GCP, FortiGate-VM64 OPC, FortiGate-VM64, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 50G 5G, FortiWiFi 50G DSL, FortiWiFi 50G SFP, FortiWiFi 50G, FortiWiFi 51G, FortiWiFi 60F, FortiWiFi 61F, FortiWiFi 70G, FortiWiFi 71G, FortiWiFi 80F 2R 3G4G DSL, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G DSL, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R.

Configure Industrial Connectivity.

config system icond
    Description: Configure Industrial Connectivity.
    set iec101-keepalive [disable|enable]
    set iec101-laddr-local {integer}
    set iec101-laddr-remote {integer}
    set iec101-laddr-size {integer}
    set iec101-mode [balanced|unbalanced]
    set iec101-t0 {integer}
    set iec101-trp {integer}
    set iec101-use-ack-char [disable|enable]
    set iec104-k {integer}
    set iec104-t1 {integer}
    set iec104-t2 {integer}
    set iec104-t3 {integer}
    set iec104-w {integer}
    set modbus-serial-addr {integer}
    set modbus-serial-mode [RTU|ASCII]
    set modbus-serial-timeout-resp {integer}
    set modbus-tcp-unit-id {integer}
    set port {integer}
    set status [disable|enable]
    set tty-baudrate [200|300|...]
    set tty-databits {integer}
    set tty-device {string}
    set tty-flowcontrol [none|xon-xoff|...]
    set tty-parity [none|odd|...]
    set tty-stopbits {integer}
    set type [iec101-104|modbus-serial-tcp|...]
end

config system icond

Parameter

Description

Type

Size

Default

iec101-keepalive

Send periodic test frame for probing link status.

option

enable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

iec101-laddr-local

Link address of local.

integer

Minimum value: 1 Maximum value: 65534

iec101-laddr-remote

Link address of remote.

integer

Minimum value: 1 Maximum value: 65535

iec101-laddr-size

Link address size.

integer

Minimum value: 0 Maximum value: 2

iec101-mode

Link layer transmission procedure.

option

balanced

Option	Description
balanced	Set IEC101 transmission mode to balanced.
unbalanced	Set IEC101 transmission mode to unbalanced.

iec101-t0

Time out for repetition of frames in milliseconds (1 - 30000, default = 500).

integer

Minimum value: 1 Maximum value: 30000

500

iec101-trp

Time interval during which repetitions are permitted in milliseconds (1 - 300000, default = 2500).

integer

Minimum value: 1 Maximum value: 300000

2500

iec101-use-ack-char

Use single character for ACK.

option

disable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

iec104-k

Maximum number of outstanding I formate APDUs (1 - 32767, default = 12).

integer

Minimum value: 1 Maximum value: 32767

iec104-t1

Time-out of send or test APDUs in seconds (1 - 255, default = 15).

integer

Minimum value: 1 Maximum value: 255

iec104-t2

Time-out for acknowledges in case no data messages in seconds (1 - 255, default = 10).

integer

Minimum value: 1 Maximum value: 255

iec104-t3

Time-out for sending test frames in case of a long idle state in seconds (1 - 172800, default = 20).

integer

Minimum value: 1 Maximum value: 172800

iec104-w

Maximum number of latest acknowledge APDUs (1 - 32767, default = 8).

integer

Minimum value: 1 Maximum value: 32767

modbus-serial-addr

Serial remote station address.

integer

Minimum value: 1 Maximum value: 247

modbus-serial-mode

Serial transmission mode.

option

RTU

Option	Description
RTU	Set Modbus transmission mode to RTU.
ASCII	Set Modbus transmission mode to ASCII.

modbus-serial-timeout-resp

Time out for serial remote station response in milliseconds (10 - 30000, default = 500).

integer

Minimum value: 10 Maximum value: 30000

500

modbus-tcp-unit-id

TCP MBAP unit identifier.

integer

Minimum value: 0 Maximum value: 255

255

port

Listening socket port.

integer

Minimum value: 1 Maximum value: 65535

status

Enable/disable this connection.

option

disable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

tty-baudrate

TTY baudrate.

option

9600

Option	Description
200	Set TTY baudrate to 200.
300	Set TTY baudrate to 300.
600	Set TTY baudrate to 600.
1200	Set TTY baudrate to 1200.
2400	Set TTY baudrate to 2400.
4800	Set TTY baudrate to 4800.
9600	Set TTY baudrate to 9600.
19200	Set TTY baudrate to 19200.
38400	Set TTY baudrate to 38400.
115200	Set TTY baudrate to 115200.

tty-databits

TTY databits.

integer

Minimum value: 5 Maximum value: 8

tty-device

TTY device.

string

Maximum length: 35

serial0

tty-flowcontrol

TTY flowcontrol.

option

none

Option	Description
none	Set TTY flow control to none.
xon-xoff	Set TTY flow control to xon/xoff.
hw	Set TTY flow control to hardware.

tty-parity

TTY parity.

option

even

Option	Description
none	Set TTY parity to none.
odd	Set TTY parity to odd.
even	Set TTY parity to even.

tty-stopbits

TTY stopbits.

integer

Minimum value: 1 Maximum value: 2

type

Connection type.

option

iec101-104

Option	Description
iec101-104	Convert between IEC60870-5-101 and IEC60870-5-104.
modbus-serial-tcp	Convert between Modbus Serial and Modbus TCP.
raw	Re-direct traffic from TTY to socket without conversion.

config system icond

Configure Industrial Connectivity.

config system icond
    Description: Configure Industrial Connectivity.
    set iec101-keepalive [disable|enable]
    set iec101-laddr-local {integer}
    set iec101-laddr-remote {integer}
    set iec101-laddr-size {integer}
    set iec101-mode [balanced|unbalanced]
    set iec101-t0 {integer}
    set iec101-trp {integer}
    set iec101-use-ack-char [disable|enable]
    set iec104-k {integer}
    set iec104-t1 {integer}
    set iec104-t2 {integer}
    set iec104-t3 {integer}
    set iec104-w {integer}
    set modbus-serial-addr {integer}
    set modbus-serial-mode [RTU|ASCII]
    set modbus-serial-timeout-resp {integer}
    set modbus-tcp-unit-id {integer}
    set port {integer}
    set status [disable|enable]
    set tty-baudrate [200|300|...]
    set tty-databits {integer}
    set tty-device {string}
    set tty-flowcontrol [none|xon-xoff|...]
    set tty-parity [none|odd|...]
    set tty-stopbits {integer}
    set type [iec101-104|modbus-serial-tcp|...]
end

config system icond

Parameter

Description

Type

Size

Default

iec101-keepalive

Send periodic test frame for probing link status.

option

enable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

iec101-laddr-local

Link address of local.

integer

Minimum value: 1 Maximum value: 65534

iec101-laddr-remote

Link address of remote.

integer

Minimum value: 1 Maximum value: 65535

iec101-laddr-size

Link address size.

integer

Minimum value: 0 Maximum value: 2

iec101-mode

Link layer transmission procedure.

option

balanced

Option	Description
balanced	Set IEC101 transmission mode to balanced.
unbalanced	Set IEC101 transmission mode to unbalanced.

iec101-t0

Time out for repetition of frames in milliseconds (1 - 30000, default = 500).

integer

Minimum value: 1 Maximum value: 30000

500

iec101-trp

Time interval during which repetitions are permitted in milliseconds (1 - 300000, default = 2500).

integer

Minimum value: 1 Maximum value: 300000

2500

iec101-use-ack-char

Use single character for ACK.

option

disable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

iec104-k

Maximum number of outstanding I formate APDUs (1 - 32767, default = 12).

integer

Minimum value: 1 Maximum value: 32767

iec104-t1

Time-out of send or test APDUs in seconds (1 - 255, default = 15).

integer

Minimum value: 1 Maximum value: 255

iec104-t2

Time-out for acknowledges in case no data messages in seconds (1 - 255, default = 10).

integer

Minimum value: 1 Maximum value: 255

iec104-t3

Time-out for sending test frames in case of a long idle state in seconds (1 - 172800, default = 20).

integer

Minimum value: 1 Maximum value: 172800

iec104-w

Maximum number of latest acknowledge APDUs (1 - 32767, default = 8).

integer

Minimum value: 1 Maximum value: 32767

modbus-serial-addr

Serial remote station address.

integer

Minimum value: 1 Maximum value: 247

modbus-serial-mode

Serial transmission mode.

option

RTU

Option	Description
RTU	Set Modbus transmission mode to RTU.
ASCII	Set Modbus transmission mode to ASCII.

modbus-serial-timeout-resp

Time out for serial remote station response in milliseconds (10 - 30000, default = 500).

integer

Minimum value: 10 Maximum value: 30000

500

modbus-tcp-unit-id

TCP MBAP unit identifier.

integer

Minimum value: 0 Maximum value: 255

255

port

Listening socket port.

integer

Minimum value: 1 Maximum value: 65535

status

Enable/disable this connection.

option

disable

Option	Description
disable	Disable the selected function.
enable	Enable the selected function.

tty-baudrate

TTY baudrate.

option

9600

Option	Description
200	Set TTY baudrate to 200.
300	Set TTY baudrate to 300.
600	Set TTY baudrate to 600.
1200	Set TTY baudrate to 1200.
2400	Set TTY baudrate to 2400.
4800	Set TTY baudrate to 4800.
9600	Set TTY baudrate to 9600.
19200	Set TTY baudrate to 19200.
38400	Set TTY baudrate to 38400.
115200	Set TTY baudrate to 115200.

tty-databits

TTY databits.

integer

Minimum value: 5 Maximum value: 8

tty-device

TTY device.

string

Maximum length: 35

serial0

tty-flowcontrol

TTY flowcontrol.

option

none

Option	Description
none	Set TTY flow control to none.
xon-xoff	Set TTY flow control to xon/xoff.
hw	Set TTY flow control to hardware.

tty-parity

TTY parity.

option

even

Option	Description
none	Set TTY parity to none.
odd	Set TTY parity to odd.
even	Set TTY parity to even.

tty-stopbits

TTY stopbits.

integer

Minimum value: 1 Maximum value: 2

type

Connection type.

option

iec101-104

Option	Description
iec101-104	Convert between IEC60870-5-101 and IEC60870-5-104.
modbus-serial-tcp	Convert between Modbus Serial and Modbus TCP.
raw	Re-direct traffic from TTY to socket without conversion.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

Web Application / API Protection

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

All Products

CLI Reference

config system icond

config system icond

config system icond

config system icond

config system icond

config system icond