diagnose npu np6 npu-feature (verify enabled NP6 features)
You can use the diagnose npu np6 npu-feature command to see the NP6 features that are enabled on your FortiGate and those that are not.
The following command output, from a FortiGate 1500D, shows the default NP6 configuration for most FortiGates with NP6 processors:
diagnose npu np6 npu-feature
np_0 np_1
------------------- --------- ---------
Fastpath Enabled Enabled
HPE-type-shaping Disabled Disabled
Standalone No No
IPv4 firewall Yes Yes
IPv6 firewall Yes Yes
IPv4 IPSec Yes Yes
IPv6 IPSec Yes Yes
IPv4 tunnel Yes Yes
IPv6 tunnel Yes Yes
GRE tunnel No No
GRE passthrough Yes Yes
IPv4 Multicast Yes Yes
IPv6 Multicast Yes Yes
CAPWAP Yes Yes
RDP Offload Yes Yes
If you use the following command to disable fastpath:
config system npu
set fastpath disable
end
The npu-feature command output shows this configuration change:
diagnose npu np6 npu-feature
np_0 np_1
------------------- --------- ---------
Fastpath Disabled Disabled
HPE-type-shaping Disabled Disabled
Standalone No No
IPv4 firewall Yes Yes
IPv6 firewall Yes Yes
IPv4 IPSec Yes Yes
IPv6 IPSec Yes Yes
IPv4 tunnel Yes Yes
IPv6 tunnel Yes Yes
GRE tunnel No No
GRE passthrough Yes Yes
IPv4 Multicast Yes Yes
IPv6 Multicast Yes Yes
CAPWAP Yes Yes
RDP Offload Yes Yes