CGN resource allocation IP pools

CGN resource allocation IP pools are variations on overload IP pools that take advantage of NP7 hardware acceleration to apply Carrier Grade NAT (CGN) features to IPv4 or NAT64 hyperscale firewall policies. CGN resource allocation IP pools manage the allocation of IPv4 source ports, addresses, and system resources used for logging.

You create CGN resource allocation IP pools from the GUI by going to Policy & Objects > IP Pools > IP Pool > Create New. Type is set to CGN Resource Allocation. Select a Mode, and edit settings for the selected mode.

From the CLI, create an IP pool and set type to cgn-resource-allocation. You can enable or disable cgn-spa, cgn-overload, and cgn-fixedalloc to select a CGN IP pool type and then edit settings for the selected type. You can enable nat64 to make this a NAT64 IP pool.

config firewall ippool

edit <name>

set type cgn-resource-allocation

set startip <ip>

set endip <ip>

set arp-reply {disable | enable}

set arp-intf <interface-name>

set associated-interface <interface-name>

set comments <comment>

set nat64 {disable | enable}

set cgn-spa {disable | enable}

set cgn-overload {disable | enable}

set cgn-fixedalloc {disable | enable}

set cgn-block-size <number-of-ports>

set cgn-client-startip <ip>

set cgn-client-endip <ip>

set cgn-port-start <port>

set cgn-port-end <port>

set utilization-alarm-raise <usage-threshold>

set utilization-alarm-clear <usage-threshold>

set exclude-ip <ip>, <ip>, <ip> ...

end

Five different types or modes of CGN resource allocation IP pool modes are available. The following table summarizes each type and the following sections describe the GUI and CLI configuration for each type.

IP pool type (mode)	GUI option	CLI options	Supported CGNAT Features
Port Block Allocation (PBA)	Port Block Allocation	set cgn-spa disable set cgn-overload disable set cgn-fixedalloc disable	Dynamic IP consistency Port block allocation No port reuse Deterministic NAT
Overload with port block allocation (PBA, overload)	Overload (Port Block Allocation)	set cgn-spa disable set cgn-overload enable	Dynamic IP consistency Port block allocation Port reuse within block Deterministic NAT
Single port allocation (SPA)	Single Port Allocation	set cgn-spa enable set cgn-overload disable	Dynamic IP consistency No port reuse Deterministic NAT
Overload with single port allocation (SPA, overload)	Overload (Single Port Allocation)	set cgn-spa enable set cgn-overload enable	Dynamic IP consistency Port reuse within the entire port range Deterministic NAT
Fixed allocation, (also called Port block allocation with fixed NAT or Deterministic NAT) (PBA, fixed NAT)	Fixed-allocation	set cgn-spa disable set cgn-overload disable set cgn-fixedalloc enable	Static IP consistency Static port block allocation No port reuse Deterministic NAT