Fortinet white logo
Fortinet white logo

CLI Reference

config router multicast6

config router multicast6

Configure IPv6 multicast.

config router multicast6
    Description: Configure IPv6 multicast.
    config interface
        Description: Protocol Independent Multicast (PIM) interfaces.
        edit <name>
            set hello-holdtime {integer}
            set hello-interval {integer}
        next
    end
    set multicast-pmtu [enable|disable]
    set multicast-routing [enable|disable]
    config pim-sm-global
        Description: PIM sparse-mode global settings.
        set pim-use-sdwan [enable|disable]
        set register-rate-limit {integer}
        config rp-address
            Description: Statically configured RP addresses.
            edit <id>
                set ip6-address {ipv6-address}
            next
        end
    end
end

config router multicast6

Parameter

Description

Type

Size

Default

multicast-pmtu

Enable/disable PMTU for IPv6 multicast.

option

-

disable

Option

Description

enable

Enable PMTU for IPv6 multicast.

disable

Disable PMTU for IPv6 multicast.

multicast-routing

Enable/disable IPv6 multicast routing.

option

-

disable

Option

Description

enable

Enable IPv6 multicast routing.

disable

Disable IPv6 multicast routing.

config interface

Parameter

Description

Type

Size

Default

hello-holdtime

Time before old neighbor information expires in seconds.

integer

Minimum value: 1 Maximum value: 65535

hello-interval

Interval between sending PIM hello messages in seconds.

integer

Minimum value: 1 Maximum value: 65535

30

name

Interface name.

string

Maximum length: 15

config pim-sm-global

Parameter

Description

Type

Size

Default

pim-use-sdwan

Enable/disable use of SDWAN when checking RPF neighbor and sending of REG packet.

option

-

disable

Option

Description

enable

Enable use of SDWAN when checking RPF neighbor and sending of REG packet.

disable

Disable use of SDWAN when checking RPF neighbor and sending of REG packet.

register-rate-limit

Limit of packets/sec per source registered through this RP (0 means unlimited).

integer

Minimum value: 0 Maximum value: 65535

0

config rp-address

Parameter

Description

Type

Size

Default

id

ID of the entry.

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-address

RP router IPv6 address.

ipv6-address

Not Specified

::

config router multicast6

config router multicast6

Configure IPv6 multicast.

config router multicast6
    Description: Configure IPv6 multicast.
    config interface
        Description: Protocol Independent Multicast (PIM) interfaces.
        edit <name>
            set hello-holdtime {integer}
            set hello-interval {integer}
        next
    end
    set multicast-pmtu [enable|disable]
    set multicast-routing [enable|disable]
    config pim-sm-global
        Description: PIM sparse-mode global settings.
        set pim-use-sdwan [enable|disable]
        set register-rate-limit {integer}
        config rp-address
            Description: Statically configured RP addresses.
            edit <id>
                set ip6-address {ipv6-address}
            next
        end
    end
end

config router multicast6

Parameter

Description

Type

Size

Default

multicast-pmtu

Enable/disable PMTU for IPv6 multicast.

option

-

disable

Option

Description

enable

Enable PMTU for IPv6 multicast.

disable

Disable PMTU for IPv6 multicast.

multicast-routing

Enable/disable IPv6 multicast routing.

option

-

disable

Option

Description

enable

Enable IPv6 multicast routing.

disable

Disable IPv6 multicast routing.

config interface

Parameter

Description

Type

Size

Default

hello-holdtime

Time before old neighbor information expires in seconds.

integer

Minimum value: 1 Maximum value: 65535

hello-interval

Interval between sending PIM hello messages in seconds.

integer

Minimum value: 1 Maximum value: 65535

30

name

Interface name.

string

Maximum length: 15

config pim-sm-global

Parameter

Description

Type

Size

Default

pim-use-sdwan

Enable/disable use of SDWAN when checking RPF neighbor and sending of REG packet.

option

-

disable

Option

Description

enable

Enable use of SDWAN when checking RPF neighbor and sending of REG packet.

disable

Disable use of SDWAN when checking RPF neighbor and sending of REG packet.

register-rate-limit

Limit of packets/sec per source registered through this RP (0 means unlimited).

integer

Minimum value: 0 Maximum value: 65535

0

config rp-address

Parameter

Description

Type

Size

Default

id

ID of the entry.

integer

Minimum value: 0 Maximum value: 4294967295

0

ip6-address

RP router IPv6 address.

ipv6-address

Not Specified

::