Determining the primary FPM

You can use the diagnose load-balance status command to determine which FPM is operating as the primary FPM.

You can also use the execute load-balance slot set-master-worker command to temporarily make an FPM the primary FPM.

The following example diagnose load-balance status output for a FortiGate-7121F shows that the FPM in slot 3 is the primary FPM. The command output also shows the status of the FPMs in slots 3 to 6 of the FortiGate-7121F.

diagnose load-balance status 
==========================================================================
Slot: 2  Module SN: FIM21FTB21000063
  Primary FPM Blade: slot-3
 
     Slot  3: FPM20FTB21900186
       Status:Working   Function:Active 
       Link:      Base: Up          Fabric: Up  
       Heartbeat: Management: Good   Data: Good  
       Status Message:"Running"
     Slot  4: FPM20FTB21900165
       Status:Working   Function:Active 
       Link:      Base: Up          Fabric: Up  
       Heartbeat: Management: Good   Data: Good  
       Status Message:"Running"
     Slot  5: FPM20FTB21900170
       Status:Working   Function:Active 
       Link:      Base: Up          Fabric: Up  
       Heartbeat: Management: Good   Data: Good  
       Status Message:"Running"
     Slot  6: FPM20FTB21900179
       Status:Working   Function:Active 
       Link:      Base: Up          Fabric: Up  
       Heartbeat: Management: Good   Data: Good  
       Status Message:"Running"
       ...