config switch-controller 802-1X-settings

This command is available for model(s): FortiGate 1000D, FortiGate 1000F, FortiGate 1001F, FortiGate 100F, FortiGate 101F Gen2, FortiGate 1100E, FortiGate 1101E, FortiGate 120G, FortiGate 121G, FortiGate 140E-POE, FortiGate 140E, FortiGate 1800F, FortiGate 1801F, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 200G, FortiGate 201E, FortiGate 201F, FortiGate 201G, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 2600F, FortiGate 2601F, FortiGate 3000D, FortiGate 3000F, FortiGate 3001F, FortiGate 300E, FortiGate 301E, FortiGate 30G, FortiGate 3100D, FortiGate 31G, FortiGate 3200D, FortiGate 3200F, FortiGate 3201F Gen2, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F Gen2, FortiGate 3501F Gen2, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3700F, FortiGate 3701F, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 400F, FortiGate 401E, FortiGate 401F, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F Gen2, FortiGate 4400F, FortiGate 4401F Gen2, FortiGate 4800F, FortiGate 4801F, FortiGate 500E, FortiGate 501E, FortiGate 50G 5G, FortiGate 50G DSL, FortiGate 50G SFP-POE, FortiGate 50G SFP, FortiGate 50G, FortiGate 51G 5G, FortiGate 51G SFP-POE, FortiGate 51G, FortiGate 600E, FortiGate 600F, FortiGate 601E, FortiGate 601F, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 70F, FortiGate 70G-POE, FortiGate 70G, FortiGate 71F, FortiGate 71G-POE, FortiGate 71G, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F DSL, FortiGate 80F Gen2, FortiGate 80F-POE, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F Gen2, FortiGate 81F-POE, FortiGate 900D, FortiGate 900G, FortiGate 901G, FortiGate 90E, FortiGate 90G Gen2, FortiGate 90G, FortiGate 91E, FortiGate 91G Gen2, FortiGate 91G, FortiGate-VM64 Aliyun, FortiGate-VM64 AWS, FortiGate-VM64 Azure, FortiGate-VM64 GCP, FortiGate-VM64 OPC, FortiGate-VM64, FortiGateRugged 50G 5G, FortiGateRugged 60F 3G4G, FortiGateRugged 60F Gen2, FortiGateRugged 70F 3G4G, FortiGateRugged 70F, FortiGateRugged 70G 5G Dual, FortiGateRugged 70G, FortiWiFi 30G, FortiWiFi 31G, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 50G 5G, FortiWiFi 50G DSL, FortiWiFi 50G SFP, FortiWiFi 50G, FortiWiFi 51G, FortiWiFi 60E DSLJ, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 70G, FortiWiFi 71G, FortiWiFi 80F 2R 3G4G DSL, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G DSL, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R.

It is not available for: FortiGate 5001E1, FortiGate 5001E.

Configure global 802.1X settings.

config switch-controller 802-1X-settings
    Description: Configure global 802.1X settings.
    set link-down-auth [set-unauth|no-action]
    set mab-reauth [disable|enable]
    set mac-called-station-delimiter [colon|hyphen|...]
    set mac-calling-station-delimiter [colon|hyphen|...]
    set mac-case [lowercase|uppercase]
    set mac-password-delimiter [colon|hyphen|...]
    set mac-username-delimiter [colon|hyphen|...]
    set max-reauth-attempt {integer}
    set reauth-period {integer}
    set tx-period {integer}
end

config switch-controller 802-1X-settings

Parameter

Description

Type

Size

Default

link-down-auth

Interface-reauthentication state to set if a link is down.

option

set-unauth

Option	Description
set-unauth	Interface set to unauth when down. Reauthentication is needed.
no-action	Interface reauthentication is not needed.

mab-reauth

Enable/disable MAB re-authentication.

option

disable

Option	Description
disable	Disable MAB re-authentication.
enable	Enable MAB re-authentication.

mac-called-station-delimiter

MAC called station delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for called station.
hyphen	Use hyphen as delimiter for called station.
none	No delimiter for called station.
single-hyphen	Use single hyphen as delimiter for called station.

mac-calling-station-delimiter

MAC calling station delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for calling station.
hyphen	Use hyphen as delimiter for calling station.
none	No delimiter for calling station.
single-hyphen	Use single hyphen as delimiter for calling station.

mac-case

MAC case (default = lowercase).

option

lowercase

Option	Description
lowercase	Use lowercase MAC.
uppercase	Use uppercase MAC.

mac-password-delimiter

MAC authentication password delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for MAC auth password.
hyphen	Use hyphen as delimiter for MAC auth password.
none	No delimiter for MAC auth password.
single-hyphen	Use single hyphen as delimiter for MAC auth password.

mac-username-delimiter

MAC authentication username delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for MAC auth username.
hyphen	Use hyphen as delimiter for MAC auth username.
none	No delimiter for MAC auth username.
single-hyphen	Use single hyphen as delimiter for MAC auth username.

max-reauth-attempt

Maximum number of authentication attempts (0 - 15, default = 3).

integer

Minimum value: 0 Maximum value: 15

reauth-period

Period of time to allow for reauthentication (1 - 1440 sec, default = 60, 0 = disable reauthentication).

integer

Minimum value: 0 Maximum value: 1440

tx-period

802.1X Tx period (seconds, default=30).

integer

Minimum value: 12 Maximum value: 60

config switch-controller 802-1X-settings

It is not available for: FortiGate 5001E1, FortiGate 5001E.

Configure global 802.1X settings.

config switch-controller 802-1X-settings
    Description: Configure global 802.1X settings.
    set link-down-auth [set-unauth|no-action]
    set mab-reauth [disable|enable]
    set mac-called-station-delimiter [colon|hyphen|...]
    set mac-calling-station-delimiter [colon|hyphen|...]
    set mac-case [lowercase|uppercase]
    set mac-password-delimiter [colon|hyphen|...]
    set mac-username-delimiter [colon|hyphen|...]
    set max-reauth-attempt {integer}
    set reauth-period {integer}
    set tx-period {integer}
end

config switch-controller 802-1X-settings

Parameter

Description

Type

Size

Default

link-down-auth

Interface-reauthentication state to set if a link is down.

option

set-unauth

Option	Description
set-unauth	Interface set to unauth when down. Reauthentication is needed.
no-action	Interface reauthentication is not needed.

mab-reauth

Enable/disable MAB re-authentication.

option

disable

Option	Description
disable	Disable MAB re-authentication.
enable	Enable MAB re-authentication.

mac-called-station-delimiter

MAC called station delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for called station.
hyphen	Use hyphen as delimiter for called station.
none	No delimiter for called station.
single-hyphen	Use single hyphen as delimiter for called station.

mac-calling-station-delimiter

MAC calling station delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for calling station.
hyphen	Use hyphen as delimiter for calling station.
none	No delimiter for calling station.
single-hyphen	Use single hyphen as delimiter for calling station.

mac-case

MAC case (default = lowercase).

option

lowercase

Option	Description
lowercase	Use lowercase MAC.
uppercase	Use uppercase MAC.

mac-password-delimiter

MAC authentication password delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for MAC auth password.
hyphen	Use hyphen as delimiter for MAC auth password.
none	No delimiter for MAC auth password.
single-hyphen	Use single hyphen as delimiter for MAC auth password.

mac-username-delimiter

MAC authentication username delimiter (default = hyphen).

option

hyphen

Option	Description
colon	Use colon as delimiter for MAC auth username.
hyphen	Use hyphen as delimiter for MAC auth username.
none	No delimiter for MAC auth username.
single-hyphen	Use single hyphen as delimiter for MAC auth username.

max-reauth-attempt

Maximum number of authentication attempts (0 - 15, default = 3).

integer

Minimum value: 0 Maximum value: 15

reauth-period

Period of time to allow for reauthentication (1 - 1440 sec, default = 60, 0 = disable reauthentication).

integer

Minimum value: 0 Maximum value: 1440

tx-period

802.1X Tx period (seconds, default=30).

integer

Minimum value: 12 Maximum value: 60

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

Web Application / API Protection

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

All Products

CLI Reference

config switch-controller 802-1X-settings

config switch-controller 802-1X-settings

config switch-controller 802-1X-settings

config switch-controller 802-1X-settings

config switch-controller 802-1X-settings

config switch-controller 802-1X-settings