hw-ha-scan-interval <seconds>

Enable and configure a time interval after which the FortiGate synchronizes hardware sessions among the FortiGates in an FGCP HA cluster. Set to 0 to disable, which is the default setting. Set a scan time interval between 1 and 3600 seconds. Normally this option should be disabled. However, if you notice that the secondary FortiGates in an FGCP cluster do not have the same number of hardware sessions and the primary FortiGate, you can try setting a hardware HA session scan interval. Depending on network conditions, enabling this feature by setting a time interval can improve hardware session synchronization