Configuring an LDAP server

FortiOS can be configured to use an LDAP server for authentication.

When configuring an LDAP connection to an Active Directory server, an administrator must provide Active Directory user credentials. To secure this connection, use LDAPS on both the Active Directory server and FortiGate. See relevant LDAPS information in this topic and Configuring client certificate authentication on the LDAP server. Apply the principle of least privilege. For the LDAP regular bind operation, do not use credentials that provide full administrative access to the Windows server when using credentials. See Configuring least privileges for LDAP admin account authentication in Active Directory.

To configure an LDAP server on the FortiGate:

1. Go to User & Authentication > LDAP Servers.
2. Click Create New.
3. Configure the following:

   Name	This connection name is for reference within the FortiGate only.
   Server IP/Name	LDAP server IP address or FQDN resolvable by the FortiGate.
   Server Port	By default, LDAP uses port 389 and LDAPS uses 636. Use this field to specify a custom port if necessary.
   Common Name Identifier	Attribute field of the object in LDAP that the FortiGate uses to identify the connecting user. The identifier is case sensitive. Common attributes are: cn (Common Name) sAMAccountName (SAMAccountName) uid (User ID)
   Distinguished Name	Used to look up user account entries on the LDAP server. It reflects the hierarchy of LDAP database object classes above the CN identifier in which you are doing the lookup. Enter dc=COMPANY,dc=com to specify the root of the domain to include all objects. Enter ou=VPN-Users,dc=COMPANY,dc=com to look up users under a specific organization unit.
   Exchange server	Enable to specify the exchange server connector to collect information about authenticated users from a corporate exchange server. See Exchange Server connector for more details.
   Bind Type	Select one of the following options: Simple: bind using simple password authentication using the client name. The LDAP server only looks up against the distinguished name (DN), but does not search on the subtree. Anonymous: bind using an anonymous user, and search starting from the DN and recurse over the subtrees. Many LDAP servers do not allow this. Regular: bind using the username and password provided, and search starting from the DN and recurse over the subtrees.
   Username	If using regular bind, enter a username with sufficient privileges to access the LDAP server. The following formats are supported: username\administrator administrator@domain cn=administrator,cn=users,dc=domain,dc=com
   Password	If using regular bind, enter the password associated with the username.
   Secure Connection	Enable to apply security to the LDAP connection through STARTTLS or LDAPS.
   Protocol	If Secure Connection is enabled, select STARTTLS or LDAPS. Selecting STARTTLS changes the port to 389 and selecting LDAPS changes the port to 636.
   Certificate	Enable and select the certificate so the FortiGate will only accept a certificate from the LDAP server that is signed by this CA.
   Server identity check	Enable to verify the server domain or IP address against the server certificate. This option is enabled by default and it is recommended to leave it enabled for a secure configuration.

   When specifying a secure connection, there are some considerations for the certificate used by LDAP to secure the connection. The FortiGate checks the certificate presented by the LDAP server for the IP address or FQDN as specified in the Server IP/Name field with the following logic: If there is a Subject Alternative Name (SAN), it will ignore any Common Name (CN) value and look for a match in any of the SAN fields. If there is no SAN, it will check the CN for a match.

4. Optionally, click Test User Credentials to ensure that the account has sufficient access rights.

5. Click OK.

   The FortiGate checks the connection and updates the Connection Status.

To configure a secure connection to the LDAP server in the GUI:

1. Go to User & Authentication > LDAP Servers.

2. Click Create New.

3. Configure the following:

   Name	LDAP-fortiad
   Server IP/Name	10.88.0.1
   Server Port	636
   Common Name Identifier	sAMAccountName
   Distinguished Name	dc=fortiad,dc=info
   Exchange server	Disabled
   Bind Type	Regular Enter the Username and Password for LDAP binding and lookup.
   Secure Connection	Enabled Set Protocol to LDAPS. Enable Certificate and select the CA certificate to validate the server certificate.
   Server identity check	Optionally, enable to verify the domain name or IP address against the server certificate.

   

4. Click Test Connectivity to verify the connection to the server.

5. Click OK.

To configure a secure connection to the LDAP server in the CLI:

config user ldap
    edit "LDAP-fortiad"
        set server "10.88.0.1"
        set cnid "sAMAccountName"
        set dn "dc=fortiad,dc=info"
        set type regular
        set username "fortiad\\Administrator"
        set password <password>
        set secure ldaps
        set ca-cert "CA_Cert_1"
        set port 636
    next
end