Rating options
This topic gives examples of the following advanced filter features:
Allow websites when a rating error occurs
If you do not have a FortiGuard license, but you have enabled services that need a FortiGuard license (such as FortiGuard filter), then you will get a rating error message.
Use this setting to allow access to websites that return a rating error from the FortiGuard Web Filter service.
To allow websites with rating errors in the GUI:
-
Go to Security Profiles > Web Filter and click Create New, or edit an existing profile.
-
In the Rating Options section, enable Allow websites when a rating error occurs.
-
Click OK.
To allow websites with rating errors in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
set options error-allow
end
next
end
Rate URLs by domain and IP address
If you enable this setting, in addition to only sending domain information to FortiGuard for rating, the FortiGate always sends both the URL domain name and the TCP/IP packet's IP address (except for private IP addresses) to FortiGuard for the rating.
The FortiGuard server might return a different category of IP address and URL domain. If they are different, the FortiGate uses the rating weight of the IP address or domain name to determine the rating result and decision. This rating weight is hard-coded in FortiOS.
For example, if we use a spoof IP of Google as www.irs.gov, the FortiGate will send both the IP address and domain name to FortiGuard to get the rating. We get two different ratings: one is the search engine and portals that belong to the Google IP, the second is the government and legal organizations that belongs to www.irs.gov. Because the search engine and portals rating has a higher weight than government and legal organizations, the traffic is rated as search engine and portals.
To rate URLs by domain and IP address in the GUI:
-
Go to Security Profiles > Web Filter and click Create New, or edit an existing profile.
-
In the Rating Options section, enable Rate URLs by domain and IP address.
-
Click OK.
To rate URLs by domain and IP address in the CLI:
config webfilter profile
edit "webfilter"
config ftgd-wf
set options rate-server-ip
end
next
end