Configuring PFCP message filters

Create PFCP message filters to allow or deny individual PFCP message types and to allow or deny unknown message types. By default the message filter allows all message types including unknown message types.

config pfcp message-filter

edit <message-filter-name>

set unknown-message {deny | allow}

set heartbeat {deny | allow}

set pfd-management {deny | allow}

set version-not-support {deny | allow}

set session-establish {deny | allow}

set session-modification {deny | allow}

set session-deletion {deny | allow}

set session-report {deny | allow}

set association-setup {deny | allow}

set association-update {deny | allow}

set association-release {deny | allow}

set node-report {deny | allow}

set session-set-deletion {deny | allow}

end

unknown-message allow or deny unknown PFCP message types.

heartbeat allow or deny heartbeat request (1) and response (2) messages .

pfd-management allow or deny PFD management request (3) and response (4) messages.

version-not-support allow or deny version not supported response (11) messages.

session-establish allow or deny session establishment request (50) and response (51) messages.

session-modification allow or deny session modification request (52) and response (53) messages.

session-deletion allow or deny session deletion request (54) and response (55) messages.

session-report allow or deny session report request (56) and response (57) messages.

association-setup allow or deny association setup request (5) and response (6) messages.

association-update allow or deny association update request (7) and response (8) messages.

association-release allow or deny association release request (9) and response (10) messages.

node-report allow or deny node report request (12) and response (13) messages.

session-set-deletion allow or deny session set deletion request (14) and response (15) messages.