VLAN inside VXLAN

VLANs can be assigned to VXLAN interfaces. In a data center network where VXLAN is used to create an L2 overlay network and for multitenant environments, a customer VLAN tag can be assigned to VXLAN interface. This allows the VLAN tag from VLAN traffic to be encapsulated within the VXLAN packet.

To configure VLAN inside VXLAN on HQ1:

1. Configure VXLAN:

   config system vxlan
      edit "vxlan1"
         set interface port1
         set vni 1000
         set remote-ip 173.1.1.1

      next
   end

2. Configure system interface:

   config system interface
      edit vlan100
        set vdom root
        set vlanid 100
        set interface dmz
      next
      edit vxlan100
        set type vlan
        set vlanid 100
        set vdom root
        set interface vxlan1
      next
   end

3. Configure software-switch:

   config system switch-interface

   edit sw1

   set vdom root

   set member vlan100 vxlan100

   set intra-switch-policy implicit

   next

   end

The default intra-switch-policy implicit behavior allows traffic between member interfaces within the switch. Therefore, it is not necessary to create firewall policies to allow this traffic.

Instead of creating a software-switch, it is possible to use a virtual-wire-pair as well. See Virtual wire pair with VXLAN.

To configure VLAN inside VXLAN on HQ2:

1. Configure VXLAN:

   config system vxlan

   edit "vxlan2"

   set interface port25

   set vni 1000

   set remote-ip 173.1.1.2

   next

   end

2. Configure system interface:

   config system interface

   edit vlan100

   set vdom root

   set vlanid 100

   set interface port20

   next

   edit vxlan100

   set type vlan

   set vlanid 100

   set vdom root

   set interface vxlan2

   next

   end

3. Configure software-switch:

   config system switch-interface

   edit sw1

   set vdom root

   set member vlan100 vxlan100

   next

   end

To verify the configuration:

Ping PC1 from PC2.

The following is captured on HQ2:

This captures the VXLAN traffic between 172.1.1.1 and 172.1.1.2 with the VLAN 100 tag inside.