Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Fortinet white logo
Fortinet docs logo DOCUMENT LIBRARY
Products Best Practices Hardware Guides Products A-Z
Summary
By Solution
By 4D Pillars
By Cloud
Secure Networking
Unified SASE
Security Operations
Secure SD-WAN
Secure Access Service Edge (SASE)
ZTNA
LAN Edge
Identity and Access Management
Next Generation Firewall
Public Cloud
Private Cloud
FortiCloud
Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
    • More >>
    Unified SASE
  • Single Vendor SASE
  • Cloud Network Security
  • Secure Endpoint Connectivity
  • Web Application / API Protection
    • More >>
    Security Operations
  • Security Operations Automation
  • Identity
  • Early Detection & Prevention
    • More >>
    Secure Networking
  • Hybrid Mesh Firewall
  • NOC Management
  • LAN
  • WAN
  • Communication & Surveillance
    • Unified SASE
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Cloud Network Security
  • Cloud-Native Security
  • Web Application / API Protection
    • Security Operations
  • Security Operations Automation
  • Endpoint
  • Data Protection
  • Identity
  • Email
  • Early Detection & Prevention
  • Expert Services
  • Edge Firewall
  • Orchestration & management
  • SD Branch
  • Application Delivery
  • Single Vendor SASE
  • Secure Endpoint Connectivity
  • Secure Private Access
  • Thin Edge
  • Identity
  • Application Gateway
  • Enterprise Asset Management
  • Endpoint Agent
  • Agentless Security Posture
  • Identity
  • Wireless
  • Switching
  • Identity
  • Privilege Acccess Management
  • Next Generation Firewall
  • Orchestration & management
  • Expert Services
  • All
  • All
  • Account Management
  • SAAS Management
  • SAAS Application Security
  • Managed Services
  • Platform as a service (PAAS)
  • Other SAAS Services
    • 4D Resources
    Solution Hubs
  • 4D Pillars
  • Cloud
  • Popular Solutions

    • Hyperscale Firewall Release Notes

    Home FortiGate / FortiOS 7.2.4 Hyperscale Firewall Release Notes
    7.2.4
    7.2.4
    7.2.3
    7.2.2
    7.2.1
    7.0.11
    7.0.10
    7.0.9
    7.0.8
    7.0.7
    7.0.6
    7.0.5
    6.4.12
    6.4.11
    6.4.10
    6.4.9
    6.4.8
    6.4.6
    6.2.9
    6.2.7
    6.2.6

    Known issues

    Known issues

    The following issues have been identified in Hyperscale firewall for FortiOS 7.2.4 Build 1396. For inquires about a particular bug, please contact Customer Service & Support. The Known issues described in the FortiOS 7.2.4 release notes also apply to Hyperscale firewall for FortiOS 7.2.4 Build 1396.

    Bug ID

    Description

    802182

    If you have configured a hardware logging server to use a VLAN interface to send log messages to a remote log server, you can't change the VLAN ID of the VLAN interface. Instead an error message similar to the following appears on the CLI when you attempt to change the VLAN ID: cmdb_txn_cache_data(query=log.npu-server,leve=1) failed. You can work around this issue by removing the hardware logging server or changing its destination, changing the VLAN ID of the VLAN interface, and then restoring the configuration of the hardware logging server.
    807523

    On NP7 platforms, the config system npu option nat46-force-ipv4-packet-forwarding is missing.
    829549 Software ALG sessions can incorrectly add DSE entries to the NP7 session table. Traffic accepted by hyperscale firewall policies with cgn-eif enabled can then be matched with the DSE sessions and pass through the FortiGate.

    841712

    The config system npu option nat64-force-ipv4-packet-forwarding is not available.

    843197

    The output of the diagnose sys npu-session list/list-full command does not include policy route information.

    846520

    After an FGCP HA failover, the NPD/LPMD processes may be stopped by an out of memory killer process after running mixed sessions even when the amount of memory use is not excessive.

    872146

    In a hyperscale firewall VDOM, intra-zone policy sessions are assigned incorrect policy IDs.
    Previous
    Next

    Known issues

    Known issues

    The following issues have been identified in Hyperscale firewall for FortiOS 7.2.4 Build 1396. For inquires about a particular bug, please contact Customer Service & Support. The Known issues described in the FortiOS 7.2.4 release notes also apply to Hyperscale firewall for FortiOS 7.2.4 Build 1396.

    Bug ID

    Description

    802182

    If you have configured a hardware logging server to use a VLAN interface to send log messages to a remote log server, you can't change the VLAN ID of the VLAN interface. Instead an error message similar to the following appears on the CLI when you attempt to change the VLAN ID: cmdb_txn_cache_data(query=log.npu-server,leve=1) failed. You can work around this issue by removing the hardware logging server or changing its destination, changing the VLAN ID of the VLAN interface, and then restoring the configuration of the hardware logging server.
    807523

    On NP7 platforms, the config system npu option nat46-force-ipv4-packet-forwarding is missing.
    829549 Software ALG sessions can incorrectly add DSE entries to the NP7 session table. Traffic accepted by hyperscale firewall policies with cgn-eif enabled can then be matched with the DSE sessions and pass through the FortiGate.

    841712

    The config system npu option nat64-force-ipv4-packet-forwarding is not available.

    843197

    The output of the diagnose sys npu-session list/list-full command does not include policy route information.

    846520

    After an FGCP HA failover, the NPD/LPMD processes may be stopped by an out of memory killer process after running mixed sessions even when the amount of memory use is not excessive.

    872146

    In a hyperscale firewall VDOM, intra-zone policy sessions are assigned incorrect policy IDs.
    Previous
    Next