Hyperscale firewall policy MIB fields
You can use the following MIB fields to send SNMP queries for hyperscale firewall policy information. These MIB fields support IPv4 and IPv6 hyperscale firewall policies and are available from the latest FORTINET-FORTIGATE-MIB.mib.
Path: FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgFirewall.fgFwPolicies.fgFwPolTables
OID: 1.3.6.1.4.1.12356.101.5.1.2
|
Index |
MIB field |
Description |
|---|---|---|
|
.3 |
fgFwHsPolStatsTable |
IPv4 hyperscale firewall policy statistics table. |
|
.3.1 |
fgFwHsPolStatsEntry |
IPv4 hyperscale firewall policy statistics entry. |
|
.3.1.1 |
fgFwHsPolID |
IPv4 hyperscale firewall policy ID. |
|
.3.1.2 |
fgFwHsPolPktCount |
IPv4 hyperscale firewall policy packet count. |
|
.3.1.3 |
fgFwHsPolByteCount |
IPv4 hyperscale firewall policy byte count. |
|
.3.1.4 |
fgFwHsPolLastUsed |
The last date and time the Ipv4 hyperscale firewall policy was used to start a session. |
|
.4 |
fgFwHsPol6StatsTable |
IPv6 hyperscale firewall policy stats table. |
|
.4.1 |
fgFwHsPol6StatsEntry |
IPv6 hyperscale firewall policy statistics entry. |
|
.4.1.1 |
fgFwHsPol6ID |
IPv6 hyperscale firewall statisticsID. |
|
.4.1.2 |
fgFwHsPol6PktCount |
IPv6 hyperscale firewall policy packet count. |
|
.4.1.3 |
fgFwHsPol6ByteCount |
IPv6 hyperscale firewall policy byte count. |
|
.4.1.4 |
fgFwHsPol6LastUsed |
The last date and time the IPv6 hyperscale firewall policy was used to start a session. |
Queries of these fields follow the convention .oid.<vdom-id>.<policy-id>
Example SNMP query for IPv4 hyperscale firewall policy statistics:
$ snmpwalk -v2c -c public <ip-address> 1.3.6.1.4.1.12356.101.5.1.2.3.1
Example SNMP query for IPv6 hyperscale firewall policy statistics:
$ snmpwalk -v2c -c public <ip-address> 1.3.6.1.4.1.12356.101.5.1.2.4.1