config switch-controller global
|
This command is available for model(s): FortiGate 1000D, FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 140E-POE, FortiGate 140E, FortiGate 1500DT, FortiGate 1500D, FortiGate 1800F, FortiGate 1801F, FortiGate 2000E, FortiGate 200E, FortiGate 200F, FortiGate 201E, FortiGate 201F, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 2600F, FortiGate 2601F, FortiGate 3000D, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3500F, FortiGate 3501F, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3960E, FortiGate 3980E, FortiGate 400E Bypass, FortiGate 400E, FortiGate 401E, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 4200F, FortiGate 4201F, FortiGate 4400F, FortiGate 4401F, FortiGate 500E, FortiGate 501E, FortiGate 600E, FortiGate 601E, FortiGate 60E DSLJ, FortiGate 60E DSL, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 800D, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 900D, FortiGate 90E, FortiGate 91E, FortiGate VM64, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 60E DSL, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R 3G4G-POE, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. It is not available for: FortiGate 5001E1, FortiGate 5001E. |
Configure FortiSwitch global settings.
config switch-controller global
Description: Configure FortiSwitch global settings.
set bounce-quarantined-link [disable|enable]
config custom-command
Description: List of custom commands to be pushed to all FortiSwitches in the VDOM.
edit <command-entry>
set command-entry {string}
set command-name {string}
next
end
set default-virtual-switch-vlan {string}
set dhcp-server-access-list [enable|disable]
set disable-discovery <name1>, <name2>, ...
set fips-enforce [disable|enable]
set firmware-provision-on-authorization [enable|disable]
set https-image-push [enable|disable]
set log-mac-limit-violations [enable|disable]
set mac-aging-interval {integer}
set mac-event-logging [enable|disable]
set mac-retention-period {integer}
set mac-violation-timer {integer}
set quarantine-mode [by-vlan|by-redirect]
set sn-dns-resolution [enable|disable]
set update-user-device {option1}, {option2}, ...
set vlan-all-mode [all|defined]
set vlan-optimization [enable|disable]
end
config switch-controller global
|
Parameter |
Description |
Type |
Size |
Default |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
bounce-quarantined-link |
Enable/disable bouncing (administratively bring the link down, up) of a switch port where a quarantined device was seen last. Helps to re-initiate the DHCP process for a device. |
option |
- |
disable |
||||||||||||
|
|
|
|||||||||||||||
|
default-virtual-switch-vlan |
Default VLAN for ports when added to the virtual-switch. |
string |
Not Specified |
|
||||||||||||
|
dhcp-server-access-list |
Enable/disable DHCP snooping server access list. |
option |
- |
disable |
||||||||||||
|
|
|
|||||||||||||||
|
disable-discovery |
Prevent this FortiSwitch from discovering. Managed device ID. |
string |
Maximum length: 79 |
|
||||||||||||
|
fips-enforce |
Enable/disable enforcement of FIPS on managed FortiSwitch devices. |
option |
- |
enable |
||||||||||||
|
|
|
|||||||||||||||
|
firmware-provision-on-authorization |
Enable/disable automatic provisioning of latest firmware on authorization. |
option |
- |
disable |
||||||||||||
|
|
|
|||||||||||||||
|
https-image-push |
Enable/disable image push to FortiSwitch using HTTPS. |
option |
- |
enable |
||||||||||||
|
|
|
|||||||||||||||
|
log-mac-limit-violations |
Enable/disable logs for Learning Limit Violations. |
option |
- |
disable |
||||||||||||
|
|
|
|||||||||||||||
|
mac-aging-interval |
Time after which an inactive MAC is aged out. |
integer |
Minimum value: 10 Maximum value: 1000000 |
300 |
||||||||||||
|
mac-event-logging |
Enable/disable MAC address event logging. |
option |
- |
disable |
||||||||||||
|
|
|
|||||||||||||||
|
mac-retention-period |
Time in hours after which an inactive MAC is removed from client DB (0 = aged out based on mac-aging-interval). |
integer |
Minimum value: 0 Maximum value: 168 |
24 |
||||||||||||
|
mac-violation-timer |
Set timeout for Learning Limit Violations (0 = disabled). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
0 |
||||||||||||
|
quarantine-mode |
Quarantine mode. |
option |
- |
by-vlan |
||||||||||||
|
|
|
|||||||||||||||
|
sn-dns-resolution |
Enable/disable DNS resolution of the FortiSwitch unit's IP address by use of its serial number. |
option |
- |
enable |
||||||||||||
|
|
|
|||||||||||||||
|
update-user-device |
Control which sources update the device user list. |
option |
- |
mac-cache lldp dhcp-snooping l2-db l3-db |
||||||||||||
|
|
|
|||||||||||||||
|
vlan-all-mode |
VLAN configuration mode, user-defined-vlans or all-possible-vlans. |
option |
- |
defined |
||||||||||||
|
|
|
|||||||||||||||
|
vlan-optimization |
FortiLink VLAN optimization. |
option |
- |
enable |
||||||||||||
|
|
|
|||||||||||||||
config custom-command
|
Parameter |
Description |
Type |
Size |
Default |
|---|---|---|---|---|
|
command-entry |
List of FortiSwitch commands. |
string |
Not Specified |
|
|
command-name |
Name of custom command to push to all FortiSwitches in VDOM. |
string |
Not Specified |
|