config switch-controller lldp-settings
Configure FortiSwitch LLDP settings.
config switch-controller lldp-settings
Description: Configure FortiSwitch LLDP settings.
set tx-hold {integer}
set tx-interval {integer}
set fast-start-interval {integer}
set management-interface [internal|mgmt]
set device-detection [disable|enable]
end
config switch-controller lldp-settings
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
tx-hold |
Number of tx-intervals before local LLDP data expires . Packet TTL is tx-hold * tx-interval. |
integer |
Minimum value: 1 Maximum value: 16 |
4 |
||||||
|
tx-interval |
Frequency of LLDP PDU transmission from FortiSwitch . Packet TTL is tx-hold * tx-interval. |
integer |
Minimum value: 5 Maximum value: 4095 |
30 |
||||||
|
fast-start-interval |
Frequency of LLDP PDU transmission from FortiSwitch for the first 4 packets when the link is up . |
integer |
Minimum value: 0 Maximum value: 255 |
2 |
||||||
|
management-interface |
Primary management interface to be advertised in LLDP and CDP PDUs. |
option |
- |
internal |
||||||
|
|
|
|||||||||
|
device-detection |
Enable/disable dynamic detection of LLDP neighbor devices for VLAN assignment. |
option |
- |
enable |
||||||
|
|
|
|||||||||