config wireless-controller wtp

Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.

Description: Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.

edit <wtp-id>

set index {integer}

set uuid {uuid}

set admin [discovered|disable|...]

set name {string}

set location {string}

set region {string}

set region-x {string}

set region-y {string}

set firmware-provision {string}

set firmware-provision-latest [disable|once]

set wtp-profile {string}

set apcfg-profile {string}

set bonjour-profile {string}

set override-led-state [enable|disable]

set led-state [enable|disable]

set override-wan-port-mode [enable|disable]

set wan-port-mode [wan-lan|wan-only]

set override-ip-fragment [enable|disable]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set override-split-tunnel [enable|disable]

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

end

set override-lan [enable|disable]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

set port-esl-mode [offline|nat-to-wan|...]

set port-esl-ssid {string}

end

set override-allowaccess [enable|disable]

set allowaccess {option1}, {option2}, ...

set override-login-passwd-change [enable|disable]

set login-passwd-change [yes|default|...]

set login-passwd {password}

config radio-1

Description: Configuration options for radio 1.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-2

Description: Configuration options for radio 2.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-3

Description: Configuration options for radio 3.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-4

Description: Configuration options for radio 4.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

set image-download [enable|disable]

set mesh-bridge-enable [default|enable|...]

set coordinate-latitude {string}

set coordinate-longitude {string}

end

config wireless-controller wtp

Parameter

Description

Type

Size

Default

index

Index .

integer

Minimum value: 0 Maximum value: 4294967295

uuid

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

uuid

Not Specified

00000000-0000-0000-0000-000000000000

admin

Configure how the FortiGate operating as a wireless controller discovers and manages this WTP, AP or FortiAP.

option

enable

Option	Description
discovered	FortiGate wireless controller discovers the WTP, AP, or FortiAP though discovery or join request messages.
disable	FortiGate wireless controller is configured to not provide service to this WTP.
enable	FortiGate wireless controller is configured to provide service to this WTP.

name

WTP, AP or FortiAP configuration name.

string

Maximum length: 35

location

Field for describing the physical location of the WTP, AP or FortiAP.

string

Maximum length: 35

region

Region name WTP is associated with.

string

Maximum length: 35

region-x

Relative horizontal region coordinate (between 0 and 1).

string

Maximum length: 15

region-y

Relative vertical region coordinate (between 0 and 1).

string

Maximum length: 15

firmware-provision

Firmware version to provision to this FortiAP on bootup (major.minor.build, i.e. 6.2.1234).

string

Maximum length: 35

firmware-provision-latest

Enable/disable one-time automatic provisioning of the latest firmware version.

option

disable

Option	Description
disable	Do not automatically provision the latest available firmware.
once	Automatically attempt a one-time upgrade to the latest available firmware version.

wtp-profile

WTP profile name to apply to this WTP, AP or FortiAP.

string

Maximum length: 35

apcfg-profile

AP local configuration profile name.

string

Maximum length: 35

bonjour-profile

Bonjour profile name.

string

Maximum length: 35

override-led-state

Enable to override the profile LED state setting for this FortiAP. You must enable this option to use the led-state command to turn off the FortiAP's LEDs.

option

disable

Option	Description
enable	Override the WTP profile LED state.
disable	Use the WTP profile LED state.

led-state

Enable to allow the FortiAPs LEDs to light. Disable to keep the LEDs off. You may want to keep the LEDs off so they are not distracting in low light areas etc.

option

enable

Option	Description
enable	Allow the LEDs on this FortiAP to light.
disable	Keep the LEDs on this FortiAP off.

override-wan-port-mode

Enable/disable overriding the wan-port-mode in the WTP profile.

option

disable

Option	Description
enable	Override the WTP profile wan-port-mode.
disable	Use the wan-port-mode in the WTP profile.

wan-port-mode

Enable/disable using the FortiAP WAN port as a LAN port.

option

wan-only

Option	Description
wan-lan	Use the FortiAP WAN port as a LAN port.
wan-only	Do not use the WAN port as a LAN port.

override-ip-fragment

Enable/disable overriding the WTP profile IP fragment prevention setting.

option

disable

Option	Description
enable	Override the WTP profile IP fragment prevention setting.
disable	Use the WTP profile IP fragment prevention setting.

ip-fragment-preventing

Method.

option

tcp-mss-adjust

Option	Description
tcp-mss-adjust	TCP maximum segment size adjustment.
icmp-unreachable	Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

override-split-tunnel

Enable/disable overriding the WTP profile split tunneling setting.

option

disable

Option	Description
enable	Override the WTP profile split tunneling setting.
disable	Use the WTP profile split tunneling setting.

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

local

Option	Description
tunnel	Split tunneling ACL list traffic will be tunnel.
local	Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

disable

Option	Description
enable	Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable	Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

override-lan

Enable to override the WTP profile LAN port setting.

option

disable

Option	Description
enable	Override the WTP profile LAN port setting.
disable	Use the WTP profile LAN port setting.

override-allowaccess

Enable to override the WTP profile management access configuration.

option

disable

Option	Description
enable	Override the WTP profile management access configuration.
disable	Use the WTP profile management access configuration.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

Option	Description
https	HTTPS access.
ssh	SSH access.
snmp	SNMP access.

override-login-passwd-change

Enable to override the WTP profile login-password (administrator password) setting.

option

disable

Option	Description
enable	Override the WTP profile login-password (administrator password) setting.
disable	Use the the WTP profile login-password (administrator password) setting.

Change or reset the administrator password of a managed WTP, FortiAP or AP .

option

Option	Description
yes	Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.
default	Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.
no	Do not change the managed WTP, FortiAP or AP's administrator password.

Set the managed WTP, FortiAP, or AP's administrator password.

password

Not Specified

image-download

Enable/disable WTP image download.

option

enable

Option	Description
enable	Enable WTP image download at join time.
disable	Disable WTP image download at join time.

mesh-bridge-enable

Enable/disable mesh Ethernet bridge when WTP is configured as a mesh branch/leaf AP.

option

default

Option	Description
default	Use mesh Ethernet bridge local setting on the WTP.
enable	Turn on mesh Ethernet bridge on the WTP.
disable	Turn off mesh Ethernet bridge on the WTP.

coordinate-latitude

WTP latitude coordinate.

string

Maximum length: 19

coordinate-longitude

WTP longitude coordinate.

string

Maximum length: 19

config split-tunneling-acl

Parameter	Description	Type	Size	Default
dest-ip	Destination IP and mask for the split-tunneling subnet.	ipv4-classnet	Not Specified	0.0.0.0 0.0.0.0

config lan

Parameter

Description

Type

Size

Default

port-mode

LAN port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port-ssid

Bridge LAN port to SSID.

string

Maximum length: 15

port1-mode

LAN port 1 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port1-ssid

Bridge LAN port 1 to SSID.

string

Maximum length: 15

port2-mode

LAN port 2 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port2-ssid

Bridge LAN port 2 to SSID.

string

Maximum length: 15

port3-mode

LAN port 3 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port3-ssid

Bridge LAN port 3 to SSID.

string

Maximum length: 15

port4-mode

LAN port 4 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port4-ssid

Bridge LAN port 4 to SSID.

string

Maximum length: 15

port5-mode

LAN port 5 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port5-ssid

Bridge LAN port 5 to SSID.

string

Maximum length: 15

port6-mode

LAN port 6 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port6-ssid

Bridge LAN port 6 to SSID.

string

Maximum length: 15

port7-mode

LAN port 7 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port7-ssid

Bridge LAN port 7 to SSID.

string

Maximum length: 15

port8-mode

LAN port 8 mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP LAN port to WTP WAN port.
bridge-to-wan	Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid	Bridge WTP LAN port to SSID.

port8-ssid

Bridge LAN port 8 to SSID.

string

Maximum length: 15

port-esl-mode

ESL port mode.

option

offline

Option	Description
offline	Offline.
nat-to-wan	NAT WTP ESL port to WTP WAN port.
bridge-to-wan	Bridge WTP ESL port to WTP WAN port.
bridge-to-ssid	Bridge WTP ESL port to SSID.

port-esl-ssid

Bridge ESL port to SSID.

string

Maximum length: 15

config radio-1

Parameter

Description

Type

Size

Default

override-band

Enable to override the WTP profile band setting.

option

disable

Option	Description
enable	Override the WTP profile band setting.
disable	Use the WTP profile band setting.

band

WiFi band that Radio 1 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

override-txpower

Enable to override the WTP profile power level configuration.

option

disable

Option	Description
enable	Override the WTP profile power level configuration.
disable	Use the WTP profile power level configuration.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

The target of automatic transmit power adjustment in dBm. .

string

Maximum length: 7

-70

power-mode

Set radio effective isotropic radiated power . This power takes into account both radio transmit power and antenna gain. Higher power level settings may be constrained by local regulatory requirements and AP capabilities.

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

override-vaps

Enable to override WTP profile Virtual Access Point (VAP) settings.

option

disable

Option	Description
enable	Override WTP profile VAP settings.
disable	Use WTP profile VAP settings.

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

override-channel

Enable to override WTP profile channel settings.

option

disable

Option	Description
enable	Override WTP profile channel settings.
disable	Use WTP profile channel settings.

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

drma-manual-mode

Radio mode to be used for DRMA manual mode .

option

ncf

Option	Description
ap	Set the radio to AP mode.
monitor	Set the radio to monitor mode
ncf	Select and set the radio mode based on NCF score.
ncf-peek	Select the radio mode based on NCF score, but do not apply.

config radio-2

Parameter

Description

Type

Size

Default

override-band

Enable to override the WTP profile band setting.

option

disable

Option	Description
enable	Override the WTP profile band setting.
disable	Use the WTP profile band setting.

band

WiFi band that Radio 2 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

override-txpower

Enable to override the WTP profile power level configuration.

option

disable

Option	Description
enable	Override the WTP profile power level configuration.
disable	Use the WTP profile power level configuration.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

The target of automatic transmit power adjustment in dBm. .

string

Maximum length: 7

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

override-vaps

Enable to override WTP profile Virtual Access Point (VAP) settings.

option

disable

Option	Description
enable	Override WTP profile VAP settings.
disable	Use WTP profile VAP settings.

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

override-channel

Enable to override WTP profile channel settings.

option

disable

Option	Description
enable	Override WTP profile channel settings.
disable	Use WTP profile channel settings.

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

drma-manual-mode

Radio mode to be used for DRMA manual mode .

option

ncf

Option	Description
ap	Set the radio to AP mode.
monitor	Set the radio to monitor mode
ncf	Select and set the radio mode based on NCF score.
ncf-peek	Select the radio mode based on NCF score, but do not apply.

config radio-3

Parameter

Description

Type

Size

Default

override-band

Enable to override the WTP profile band setting.

option

disable

Option	Description
enable	Override the WTP profile band setting.
disable	Use the WTP profile band setting.

band

WiFi band that Radio 3 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

override-txpower

Enable to override the WTP profile power level configuration.

option

disable

Option	Description
enable	Override the WTP profile power level configuration.
disable	Use the WTP profile power level configuration.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

The target of automatic transmit power adjustment in dBm. .

string

Maximum length: 7

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

override-vaps

Enable to override WTP profile Virtual Access Point (VAP) settings.

option

disable

Option	Description
enable	Override WTP profile VAP settings.
disable	Use WTP profile VAP settings.

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

override-channel

Enable to override WTP profile channel settings.

option

disable

Option	Description
enable	Override WTP profile channel settings.
disable	Use WTP profile channel settings.

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

drma-manual-mode

Radio mode to be used for DRMA manual mode .

option

ncf

Option	Description
ap	Set the radio to AP mode.
monitor	Set the radio to monitor mode
ncf	Select and set the radio mode based on NCF score.
ncf-peek	Select the radio mode based on NCF score, but do not apply.

config radio-4

Parameter

Description

Type

Size

Default

override-band

Enable to override the WTP profile band setting.

option

disable

Option	Description
enable	Override the WTP profile band setting.
disable	Use the WTP profile band setting.

band

WiFi band that Radio 4 operates on.

option

Option	Description
802.11a	802.11a.
802.11b	802.11b.
802.11g	802.11g/b.
802.11n	802.11n/g/b at 2.4GHz.
802.11n-5G	802.11n/a at 5GHz.
802.11ac	802.11ac/n/a.
802.11ax-5G	802.11ax/ac/n/a at 5GHz.
802.11ax	802.11ax/n/g/b at 2.4GHz.
802.11ac-2G	802.11ac at 2.4GHz.
802.11n,g-only	802.11n/g at 2.4GHz.
802.11g-only	802.11g.
802.11n-only	802.11n at 2.4GHz.
802.11n-5G-only	802.11n at 5GHz.
802.11ac,n-only	802.11ac/n.
802.11ac-only	802.11ac.
802.11ax,ac-only	802.11ax/ac at 5GHz.
802.11ax,ac,n-only	802.11ax/ac/n at 5GHz.
802.11ax-5G-only	802.11ax at 5GHz.
802.11ax,n-only	802.11ax/n at 2.4GHz.
802.11ax,n,g-only	802.11ax/n/g at 2.4GHz.
802.11ax-only	802.11ax at 2.4GHz.

override-txpower

Enable to override the WTP profile power level configuration.

option

disable

Option	Description
enable	Override the WTP profile power level configuration.
disable	Use the WTP profile power level configuration.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

disable

Option	Description
enable	Enable automatic transmit power adjustment.
disable	Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-target

The target of automatic transmit power adjustment in dBm. .

string

Maximum length: 7

-70

power-mode

option

percentage

Option	Description
dBm	Set radio EIRP power in dBm.
percentage	Set radio EIRP power by percentage.

power-level

Radio EIRP power level as a percentage of the maximum EIRP power .

integer

Minimum value: 0 Maximum value: 100

100

power-value

Radio EIRP power in dBm .

integer

Minimum value: 1 Maximum value: 33

override-vaps

Enable to override WTP profile Virtual Access Point (VAP) settings.

option

disable

Option	Description
enable	Override WTP profile VAP settings.
disable	Use WTP profile VAP settings.

vap-all

Configure method for assigning SSIDs to this FortiAP .

option

tunnel

Option	Description
tunnel	Automatically select tunnel SSIDs.
bridge	Automatically select local-bridging SSIDs.
manual	Manually select SSIDs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

override-channel

Enable to override WTP profile channel settings.

option

disable

Option	Description
enable	Override WTP profile channel settings.
disable	Use WTP profile channel settings.

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

drma-manual-mode

Radio mode to be used for DRMA manual mode .

option

ncf

Option	Description
ap	Set the radio to AP mode.
monitor	Set the radio to monitor mode
ncf	Select and set the radio mode based on NCF score.
ncf-peek	Select the radio mode based on NCF score, but do not apply.

config wireless-controller wtp

Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.

config wireless-controller wtp

Description: Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.

edit <wtp-id>

set index {integer}

set uuid {uuid}

set admin [discovered|disable|...]

set name {string}

set location {string}

set region {string}

set region-x {string}

set region-y {string}

set firmware-provision {string}

set firmware-provision-latest [disable|once]

set wtp-profile {string}

set apcfg-profile {string}

set bonjour-profile {string}

set override-led-state [enable|disable]

set led-state [enable|disable]

set override-wan-port-mode [enable|disable]

set wan-port-mode [wan-lan|wan-only]

set override-ip-fragment [enable|disable]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set override-split-tunnel [enable|disable]

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

end

set override-lan [enable|disable]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

set port-esl-mode [offline|nat-to-wan|...]

set port-esl-ssid {string}

end

set override-allowaccess [enable|disable]

set allowaccess {option1}, {option2}, ...

set override-login-passwd-change [enable|disable]

set login-passwd-change [yes|default|...]

set login-passwd {password}

config radio-1

Description: Configuration options for radio 1.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-2

Description: Configuration options for radio 2.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-3

Description: Configuration options for radio 3.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

config radio-4

Description: Configuration options for radio 4.

set override-band [enable|disable]

set band [802.11a|802.11b|...]

set override-txpower [enable|disable]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set auto-power-target {string}

set power-mode [dBm|percentage]

set power-level {integer}

set power-value {integer}

set override-vaps [enable|disable]

set vap-all [tunnel|bridge|...]

set vaps <name1>, <name2>, ...

set override-channel [enable|disable]

set channel <chan1>, <chan2>, ...

set drma-manual-mode [ap|monitor|...]

end

set image-download [enable|disable]

set mesh-bridge-enable [default|enable|...]

set coordinate-latitude {string}

set coordinate-longitude {string}

end

config wireless-controller wtp

Parameter

Description

Type

Size

Default

index

Index .

integer

Minimum value: 0 Maximum value: 4294967295

uuid

Universally Unique Identifier (UUID; automatically assigned but can be manually reset).

uuid

Not Specified

00000000-0000-0000-0000-000000000000

admin

Configure how the FortiGate operating as a wireless controller discovers and manages this WTP, AP or FortiAP.

option

enable

Option	Description
discovered	FortiGate wireless controller discovers the WTP, AP, or FortiAP though discovery or join request messages.
disable	FortiGate wireless controller is configured to not provide service to this WTP.
enable	FortiGate wireless controller is configured to provide service to this WTP.

name

WTP, AP or FortiAP configuration name.

string

Maximum length: 35

location

Field for describing the physical location of the WTP, AP or FortiAP.

string

Maximum length: 35

region

Region name WTP is associated with.

string

Maximum length: 35

region-x

Relative horizontal region coordinate (between 0 and 1).

string

Maximum length: 15

region-y

Relative vertical region coordinate (between 0 and 1).

string

Maximum length: 15

firmware-provision

Firmware version to provision to this FortiAP on bootup (major.minor.build, i.e. 6.2.1234).

string

Maximum length: 35

firmware-provision-latest

Enable/disable one-time automatic provisioning of the latest firmware version.

option

disable

Option	Description
disable	Do not automatically provision the latest available firmware.
once	Automatically attempt a one-time upgrade to the latest available firmware version.

wtp-profile

WTP profile name to apply to this WTP, AP or FortiAP.

string

Maximum length: 35

apcfg-profile

AP local configuration profile name.

string

Maximum length: 35

bonjour-profile

Bonjour profile name.

string

Maximum length: 35

override-led-state

Enable to override the profile LED state setting for this FortiAP. You must enable this option to use the led-state command to turn off the FortiAP's LEDs.

option

disable

Option	Description
enable	Override the WTP profile LED state.
disable	Use the WTP profile LED state.

led-state

Enable to allow the FortiAPs LEDs to light. Disable to keep the LEDs off. You may want to keep the LEDs off so they are not distracting in low light areas etc.

option

enable

Option	Description
enable	Allow the LEDs on this FortiAP to light.
disable	Keep the LEDs on this FortiAP off.

override-wan-port-mode

Enable/disable overriding the wan-port-mode in the WTP profile.

option

disable

Option	Description
enable	Override the WTP profile wan-port-mode.
disable	Use the wan-port-mode in the WTP profile.

wan-port-mode

Enable/disable using the FortiAP WAN port as a LAN port.

option

wan-only

Option	Description
wan-lan	Use the FortiAP WAN port as a LAN port.
wan-only	Do not use the WAN port as a LAN port.

override-ip-fragment

Enable/disable overriding the WTP profile IP fragment prevention setting.

option

disable

Option	Description
enable	Override the WTP profile IP fragment prevention setting.
disable	Use the WTP profile IP fragment prevention setting.

ip-fragment-preventing

Method.

option

tcp-mss-adjust

Option	Description
tcp-mss-adjust	TCP maximum segment size adjustment.
icmp-unreachable	Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

override-split-tunnel

Enable/disable overriding the WTP profile split tunneling setting.

option

disable

Option	Description
enable	Override the WTP profile split tunneling setting.
disable	Use the WTP profile split tunneling setting.

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

local

Option	Description
tunnel	Split tunneling ACL list traffic will be tunnel.
local	Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

disable

Option	Description
enable	Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable	Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

override-lan

Enable to override the WTP profile LAN port setting.

option

disable

Option	Description
enable	Override the WTP profile LAN port setting.
disable	Use the WTP profile LAN port setting.

override-allowaccess

Enable to override the WTP profile management access configuration.

option

disable

Option	Description
enable	Override the WTP profile management access configuration.
disable	Use the WTP profile management access configuration.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

CLI Reference

config wireless-controller wtp

config wireless-controller wtp

config wireless-controller wtp

config split-tunneling-acl

config lan

config radio-1

config radio-2

config radio-3

config radio-4

config wireless-controller wtp

config wireless-controller wtp

config wireless-controller wtp