config system ptp

Configure system PTP information.

config system ptp

Description: Configure system PTP information.

set status [enable|disable]

set mode [multicast|hybrid]

set delay-mechanism [E2E|P2P]

set request-interval {integer}

set interface {string}

set server-mode [enable|disable]

config server-interface

Description: FortiGate interface(s) with PTP server mode enabled. Devices on your network can contact these interfaces for PTP services.

edit <id>

set server-interface-name {string}

set delay-mechanism [E2E|P2P]

next

end

end

config system ptp

Parameter	Description	Type	Size	Default
status	Enable/disable setting the FortiGate system time by synchronizing with an PTP Server.	option	-	disable
	Option Description enable Enable synchronization with PTP Server. disable Disable synchronization with PTP Server.
mode	Multicast transmission or hybrid transmission.	option	-	multicast
	Option Description multicast Send PTP packets with multicast. hybrid Send PTP packets with unicast and multicast.
delay-mechanism	End to end delay detection or peer to peer delay detection.	option	-	E2E
	Option Description E2E End to end delay detection. P2P Peer to peer delay detection.
request-interval	The delay request value is the logarithmic mean interval in seconds between the delay request messages sent by the slave to the master.	integer	Minimum value: 1 Maximum value: 6	1
interface	PTP client will reply through this interface.	string	Maximum length: 15
server-mode	Enable/disable FortiGate PTP server mode. Your FortiGate becomes an PTP server for other devices on your network.	option	-	disable
	Option Description enable Enable FortiGate PTP server mode. disable Disable FortiGate PTP server mode.

config server-interface

Parameter	Description	Type	Size	Default
server-interface-name	Interface name.	string	Maximum length: 15
delay-mechanism	End to end delay detection or peer to peer delay detection.	option	-	E2E
	Option Description E2E End to end delay detection. P2P Peer to peer delay detection.