config vpn l2tp
Configure L2TP.
config vpn l2tp
Description: Configure L2TP.
set status [enable|disable]
set eip {ipv4-address}
set sip {ipv4-address}
set usrgrp {string}
set enforce-ipsec [enable|disable]
set lcp-echo-interval {integer}
set lcp-max-echo-fails {integer}
set hello-interval {integer}
set compress [enable|disable]
end
config vpn l2tp
|
Parameter |
Description |
Type |
Size |
Default |
||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
status |
Enable/disable FortiGate as a L2TP gateway. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
eip |
End IP. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||
|
sip |
Start IP. |
ipv4-address |
Not Specified |
0.0.0.0 |
||||||
|
usrgrp |
User group. |
string |
Maximum length: 35 |
|
||||||
|
enforce-ipsec |
Enable/disable IPsec enforcement. |
option |
- |
disable |
||||||
|
|
|
|||||||||
|
lcp-echo-interval |
Time in seconds between PPPoE Link Control Protocol (LCP) echo requests. |
integer |
Minimum value: 0 Maximum value: 32767 |
5 |
||||||
|
lcp-max-echo-fails |
Maximum number of missed LCP echo messages before disconnect. |
integer |
Minimum value: 0 Maximum value: 32767 |
3 |
||||||
|
hello-interval |
L2TP hello message interval in seconds . |
integer |
Minimum value: 0 Maximum value: 3600 |
60 |
||||||
|
compress |
Enable/disable data compression. |
option |
- |
disable |
||||||
|
|
|
|||||||||