VM license

You can access the FortiGate VM License from the Dashboard > Status page in the Virtual Machine widget. Click the device license and select FortiGate VM License.

The FortiGate VM License page displays the following information:

Field	Description
License status	Displays one of the following statuses: Valid: VM can connect and validate the license against a FortiManager or FortiGuard server. All features are available. Warning: VM cannot connect and validate against a FortiManager or FortiGuard server. A check is made against how many days the warning status is continuous. If the number is less than 30 days, the status does not change. Invalid: VM cannot connect and validate against a FortiManager or FortiGuard server. A check is made against how many days the warning status is continuous. If the number is 30 days or more, the status changes to invalid. GUI access is restricted until a valid license is uploaded. Firewall policies do not work. FortiGuard downloads are not available. Pending: a temporary state where the VM is attempting to validate its license. Reasons for having a warning or invalid status include: The network environment does not allow FortiGate-VM to connect to the FortiGuard server. The license might be expired. Check the expiration date for evaluation or term-based licenses. Another VM has been already validated with FortiGuard using the same license. See VM license activation for details about duplicated VM instances.
Allocated vCPUs	Number of allocated and total allowable vCPUs
Allocated RAM	Amount of allocated RAM. There are no RAM restrictions.
Expires on	Expiry date (value depends on the type of license)

This information is visible in the CLI by running get system status (see CLI troubleshooting).

Uploading a license file

After you submit an order for a FortiGate-VM, Fortinet sends a license registration code to the email address that you entered in the order form. Use this code on the FortiCloud portal to register the FortiGate-VM.

Once the VM is registered, you can download the license file in .LIC format. On the FortiGate VM License page, click Upload. The system will prompt you to reboot and validate the license with the FortiGuard server. Once validated, your FortiGate-VM is fully functional.

The VM license window may also appear immediately after logging in if you are running a VM with an evaluation license that has expired.

In cases where the GUI is not accessible, you can upload the license using secure copy (SCP).

For information about injecting FortiFlex license tokens, see Injecting tokens into FortiGate-VM in the Flex VM Deployment Guide.

To upload the license using SCP:

1. Enable SCP:

   config system global
       set admin-scp enable
   end

2. Enable SSH in the administrative access for the interface where the transfer will take place:

   config system interface
       edit <interface>
           append allowaccess ssh
       next
   end

3. On your computer, upload the VM license. This example is for Linux:

   scp <filename> <admin-user>@<FortiGate_IP>:vmlicense

Types of VM licenses

FortiGate-VM offers perpetual licensing (normal series and V-series) and annual subscription licensing (S-series). SKUs are based on the number of vCPUs (1, 2, 4, 8, 16, 32, or unlimited).

The FortiFlex program allows qualified enterprise and MSSP customers to create as many VM entitlements as required. Resource consumption is based upon predefined points that are calculated on a daily basis. For information, see the FortiFlex Program Guide in the Fortinet document library.

Feature	Normal series	V-series	S-series	FortiFlex
Licensing and support	The VM base is perpetual. You must separately contract support services on an annual basis. See the price list for details.		Single annually contracted SKU that contains a VM base and a FortiCare service bundle. Four support service bundle types are available: Only FortiCare UTM Enterprise 360 Protection	An annually contracted program to create multiple sets of a single entitlement per VM. Entitlements contain a VM base and FortiCare bundle. Four support service bundle types are available: Only FortiCare UTM Enterprise 360 Protection
vCPU number upgrade during contracted term	Not supported.		Supported. You can also upgrade the support service bundle. Contact a Fortinet sales representative to upgrade.	Supported. You can apply different VM entitlement configurations in the FortiFlex portal. API is not supported at this time.
vCPU number downgrade during contracted term	Not supported.
VDOM support	By default, each CPU level supports up to a certain number of VDOMs. Refer to the FortiGate-VM data sheet for default limits.	By default, all CPU levels do not support adding VDOMs.	By default, all CPU levels do not support adding VDOMs. S-series VM instances support the subscription VDOM license.

Consuming a new vCPU

In a scenario where you have not allocated all the vCPUs allotted by your VM entitlement, you can add additional vCPUs to your FortiGate VM. The vCPU allocation can be verified in the GUI and CLI.

To confirm the vCPU allocation in the GUI:

1. Go to Dashboard > Status, and locate the Virtual Machine widget.
2. Verify the Allocate vCPUs field, which displays the number and percentage of allocated vCPUs.

To confirm the vCPU allocation in the CLI:

# get system status | grep "VM Resources"
VM Resources: 1 CPU/4 allowed, 2006 MB RAM

You can increase the number of vCPUs on running FortiGate VM models that support hot-adding. Once the hot-adding is complete, perform one of the following for FortiOS to recognize the new CPUs:

• Enter execute cpu add <number_of_new_vCPUs>.
• Reboot the FortiGate.

CLI troubleshooting

In some cases, more information can be viewed from the CLI to diagnose issues with VM licensing. This is also useful when the GUI is inaccessible due to an invalid contract.

Before you begin, ensure your FortiGate has the proper routes to connect to the internet.

To view the license status, expiration date, and VM resources:

# get system status
Version: FortiGate-VM64-KVM v6.4.2,build1723,200730 (GA)
...
Serial-Number: FGVM08**********
....
License Status: Valid
License Expiration Date: 2020-12-10
VM Resources: 1 CPU/8 allowed, 2010 MB RAM
...

To display license details:

# diagnose debug vm-print-license
SerialNumber: FGVM08**********
CreateDate: Tue Dec 10 00:57:32 2019
License expires: Thu Dec 10 00:00:00 2020
Expiry: 366
Key: yes
Cert: yes
Key2: yes
Cert2: yes
Model: 08 (11)
CPU: 8
MEM: 2147483647

To display license information from FortiGuard:

# diagnose hardware sysinfo vm full
UUID:     abbe****************************
valid:    1
status:   1
code:     200
warn:     0
copy:     0
received: 4604955037
warning:  4600905081
recv:     202009152207
dup:

Field	Value and description
Valid	0 – Invalid 1 – Valid
Status	0 – Startup 1 – Success 2 – Warning 3 – Error 4 – Invalid Copy 5 – Eval Expired 6 - Grace Period. For FortiFlex, there is a two-hour grace period to begin passing traffic upon retrieving the license from FortiCare.
Code	2xx, 3xx – Success 200 – Valid 202 – Accepted (treated as correct response code) 4xx - Error 400 – Expired 401 – Duplicate 5xx – Warning 500 - Warning 502 – Invalid. Cannot connect to FDS 6xx – Evaluation license expired Other codes - Error

This combination indicates the license is valid and functioning normally:

valid: 1
status: 1
code: 200

This combination indicates the license is valid but may be running a duplicate instance:

valid: 1
status: 4
code: 401

This combination indicates the system cannot connect to FortiGuard:

valid:    0
status:   2
code:     502

This combination indicates the license is invalid:

valid: 0
status: 3
code: 400

For FortiFlex licenses, the following command allows you to enter the license token and proxy information:

# execute vm-license <token> https://<username>:<password>@<proxy IP address>:<proxy port>

FortiOS can receive the following error codes from the FortiCare server:

1 - Runtime error (server unhandled error on FortiCare sever)

57 - License Token is invalid

58 - License Token is already used and cannot be used again to retrieve license key

The FortiGate can generate the following error code:

60 - Failed to request forticare license. Failed to download VM license.

Contact Fortinet Support for assistance if your licensing issue persists.