config system probe-response

Configure system probe response.

config system probe-response

Description: Configure system probe response.

set port {integer}

set http-probe-value {string}

set ttl-mode [reinit|decrease|...]

set mode [none|http-probe|...]

set security-mode [none|authentication]

set password {password}

set timeout {integer}

end

config system probe-response

Parameter	Description	Type	Size	Default
port	Port number to response.	integer	Minimum value: 1 Maximum value: 65535	8008
http-probe-value	Value to respond to the monitoring server.	string	Maximum length: 1024	OK
ttl-mode	Mode for TWAMP packet TTL modification.	option	-	retain
	Option Description reinit Reinitialize TTL. decrease Decrease TTL. retain Retain TTL.
mode	SLA response mode.	option	-	none
	Option Description none Disable probe. http-probe HTTP probe. twamp Two way active measurement protocol.
security-mode	Twamp respondor security mode.	option	-	none
	Option Description none Unauthenticated mode. authentication Authenticated mode.
password	Twamp respondor password in authentication mode	password	Not Specified
timeout	An inactivity timer for a twamp test session.	integer	Minimum value: 10 Maximum value: 3600	300