Fortinet black logo

CLI Reference

wireless-controller wtp-profile

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

  config wireless-controller wtp-profile
      Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.
      edit <name>
          set comment {var-string}
          config platform
              Description: WTP, FortiAP, or AP platform.
              set type [AP-11N|220B|...]
              set mode [single-5G|dual-5G]
              set ddscan [enable|disable]
          end
          set control-message-offload {option1}, {option2}, ...
          set apcfg-profile {string}
          set ble-profile {string}
          set wan-port-mode [wan-lan|wan-only]
          config lan
              Description: WTP LAN port mapping.
              set port-mode [offline|nat-to-wan|...]
              set port-ssid {string}
              set port1-mode [offline|nat-to-wan|...]
              set port1-ssid {string}
              set port2-mode [offline|nat-to-wan|...]
              set port2-ssid {string}
              set port3-mode [offline|nat-to-wan|...]
              set port3-ssid {string}
              set port4-mode [offline|nat-to-wan|...]
              set port4-ssid {string}
              set port5-mode [offline|nat-to-wan|...]
              set port5-ssid {string}
              set port6-mode [offline|nat-to-wan|...]
              set port6-ssid {string}
              set port7-mode [offline|nat-to-wan|...]
              set port7-ssid {string}
              set port8-mode [offline|nat-to-wan|...]
              set port8-ssid {string}
              set port-esl-mode [offline|nat-to-wan|...]
              set port-esl-ssid {string}
          end
          set energy-efficient-ethernet [enable|disable]
          set led-state [enable|disable]
          set led-schedules <name1>, <name2>, ...
          set dtls-policy {option1}, {option2}, ...
          set dtls-in-kernel [enable|disable]
          set max-clients {integer}
          set handoff-rssi {integer}
          set handoff-sta-thresh {integer}
          set handoff-roaming [enable|disable]
          config deny-mac-list
              Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.
              edit <id>
                  set mac {mac-address}
              next
          end
          set ap-country [NA|AL|...]
          set ip-fragment-preventing {option1}, {option2}, ...
          set tun-mtu-uplink {integer}
          set tun-mtu-downlink {integer}
          set split-tunneling-acl-path [tunnel|local]
          set split-tunneling-acl-local-ap-subnet [enable|disable]
          config split-tunneling-acl
              Description: Split tunneling ACL filter list.
              edit <id>
                  set dest-ip {ipv4-classnet}
              next
          end
          set allowaccess {option1}, {option2}, ...
          set login-passwd-change [yes|default|...]
          set login-passwd {password}
          set lldp [enable|disable]
          set poe-mode [auto|8023af|...]
          set frequency-handoff [enable|disable]
          set ap-handoff [enable|disable]
          config radio-1
              Description: Configuration options for radio 1.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-2
              Description: Configuration options for radio 2.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-3
              Description: Configuration options for radio 3.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-4
              Description: Configuration options for radio 4.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config lbs
              Description: Set various location based service (LBS) options.
              set ekahau-blink-mode [enable|disable]
              set ekahau-tag {mac-address}
              set erc-server-ip {ipv4-address-any}
              set erc-server-port {integer}
              set aeroscout [enable|disable]
              set aeroscout-server-ip {ipv4-address-any}
              set aeroscout-server-port {integer}
              set aeroscout-mu [enable|disable]
              set aeroscout-ap-mac [bssid|board-mac]
              set aeroscout-mmu-report [enable|disable]
              set aeroscout-mu-factor {integer}
              set aeroscout-mu-timeout {integer}
              set fortipresence [foreign|both|...]
              set fortipresence-server {ipv4-address-any}
              set fortipresence-port {integer}
              set fortipresence-secret {password}
              set fortipresence-project {string}
              set fortipresence-frequency {integer}
              set fortipresence-rogue [enable|disable]
              set fortipresence-unassoc [enable|disable]
              set fortipresence-ble [enable|disable]
              set station-locate [enable|disable]
          end
          set ext-info-enable [enable|disable]
      next
  end

config wireless-controller wtp-profile

Parameter Name Description Type Size
comment Comment. var-string Maximum length: 255
control-message-offload Enable/disable CAPWAP control message data channel offload.
ebp-frame: Ekahau blink protocol (EBP) frames.
aeroscout-tag: AeroScout tag.
ap-list: Rogue AP list.
sta-list: Rogue STA list.
sta-cap-list: STA capability list.
stats: WTP, radio, VAP, and STA statistics.
aeroscout-mu: AeroScout Mobile Unit (MU) report.
sta-health: STA health log.
spectral-analysis: Spectral analysis report.
option -
apcfg-profile AP local configuration profile name. string Maximum length: 35
ble-profile Bluetooth Low Energy profile name. string Maximum length: 35
wan-port-mode Enable/disable using a WAN port as a LAN port.
wan-lan: Enable using a WAN port as a LAN port.
wan-only: Disable using a WAN port as a LAN port.
option -
energy-efficient-ethernet Enable/disable use of energy efficient Ethernet on WTP.
enable: Enable use of energy efficient Ethernet on WTP.
disable: Disable use of energy efficient Ethernet on WTP.
option -
led-state Enable/disable use of LEDs on WTP (default = disable).
enable: Enable use of LEDs on WTP.
disable: Disable use of LEDs on WTP.
option -
led-schedules <name> Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.
Schedule name.
string Maximum length: 35
dtls-policy WTP data channel DTLS policy (default = clear-text).
clear-text: Clear Text Data Channel.
dtls-enabled: DTLS Enabled Data Channel.
ipsec-vpn: IPsec VPN Data Channel.
option -
dtls-in-kernel Enable/disable data channel DTLS in kernel.
enable: Enable data channel DTLS in kernel.
disable: Disable data channel DTLS in kernel.
option -
max-clients Maximum number of stations (STAs) supported by the WTP (default = 0, meaning no client limitation). integer Minimum value: 0 Maximum value: 4294967295
handoff-rssi Minimum received signal strength indicator (RSSI) value for handoff (20 - 30, default = 25). integer Minimum value: 20 Maximum value: 30
handoff-sta-thresh Threshold value for AP handoff. integer Minimum value: 0 Maximum value: 4294967295
handoff-roaming Enable/disable client load balancing during roaming to avoid roaming delay (default = disable).
enable: Enable handoff roaming.
disable: Disable handoff roaming.
option -
ap-country
ip-fragment-preventing Method(s) by which IP fragmentation is prevented for control and data packets through CAPWAP tunnel (default = tcp-mss-adjust).
tcp-mss-adjust: TCP maximum segment size adjustment.
icmp-unreachable: Drop packet and send ICMP Destination Unreachable
option -
tun-mtu-uplink The maximum transmission unit (MTU) of uplink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). integer Minimum value: 576 Maximum value: 1500
tun-mtu-downlink The MTU of downlink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). integer Minimum value: 576 Maximum value: 1500
split-tunneling-acl-path Split tunneling ACL path is local/tunnel.
tunnel: Split tunneling ACL list traffic will be tunnel.
local: Split tunneling ACL list traffic will be local NATed.
option -
split-tunneling-acl-local-ap-subnet Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL (default = disable).
enable: Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable: Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
option -
allowaccess Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.
https: HTTPS access.
ssh: SSH access.
snmp: SNMP access.
option -
login-passwd-change Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no, default = no).
yes: Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.
default: Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.
no: Do not change the managed WTP, FortiAP or AP's administrator password.
option -
login-passwd Set the managed WTP, FortiAP, or AP's administrator password. password Not Specified
lldp Enable/disable Link Layer Discovery Protocol (LLDP) for the WTP, FortiAP, or AP (default = enable).
enable: Enable LLDP.
disable: Disable LLDP.
option -
poe-mode Set the WTP, FortiAP, or AP's PoE mode.
auto: Automatically detect the PoE mode.
8023af: Use 802.3af PoE mode.
8023at: Use 802.3at PoE mode.
power-adapter: Use the power adapter to control the PoE mode.
option -
frequency-handoff Enable/disable frequency handoff of clients to other channels (default = disable).
enable: Enable frequency handoff.
disable: Disable frequency handoff.
option -
ap-handoff Enable/disable AP handoff of clients to other APs (default = disable).
enable: Enable AP handoff.
disable: Disable AP handoff.
option -
ext-info-enable Enable/disable station/VAP/radio extension information.
enable: Enable station/VAP/radio extension information.
disable: Disable station/VAP/radio extension information.
option -

config platform

Parameter Name Description Type Size
type WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.
AP-11N: Default 11n AP.
220B: FAP220B/221B.
210B: FAP210B.
222B: FAP222B.
112B: FAP112B.
320B: FAP320B.
11C: FAP11C.
14C: FAP14C.
223B: FAP223B.
28C: FAP28C.
320C: FAP320C.
221C: FAP221C.
25D: FAP25D.
222C: FAP222C.
224D: FAP224D.
214B: FK214B.
21D: FAP21D.
24D: FAP24D.
112D: FAP112D.
223C: FAP223C.
321C: FAP321C.
C220C: FAPC220C.
C225C: FAPC225C.
C23JD: FAPC23JD.
C24JE: FAPC24JE.
S321C: FAPS321C.
S322C: FAPS322C.
S323C: FAPS323C.
S311C: FAPS311C.
S313C: FAPS313C.
S321CR: FAPS321CR.
S322CR: FAPS322CR.
S323CR: FAPS323CR.
S421E: FAPS421E.
S422E: FAPS422E.
S423E: FAPS423E.
421E: FAP421E.
423E: FAP423E.
221E: FAP221E.
222E: FAP222E.
223E: FAP223E.
224E: FAP224E.
231E: FAP231E.
S221E: FAPS221E.
S223E: FAPS223E.
321E: FAP321E.
431F: FAP431F.
432F: FAP432F.
433F: FAP433F.
231F: FAP231F.
234F: FAP234F.
23JF: FAP23JF.
U421E: FAPU421EV.
U422EV: FAPU422EV.
U423E: FAPU423EV.
U221EV: FAPU221EV.
U223EV: FAPU223EV.
U24JEV: FAPU24JEV.
U321EV: FAPU321EV.
U323EV: FAPU323EV.
U431F: FAPU431F.
U433F: FAPU433F.
option -
mode Configure operation mode of 5G radios (default = single-5G).
single-5G: Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.
dual-5G: Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.
option -
ddscan Enable/disable use of one radio for dedicated dual-band scanning to detect RF characterization and wireless threat management.
enable: Enable dedicated dual-band scan mode.
disable: Disable dedicated dual-band scan mode.
option -

config lan

Parameter Name Description Type Size
port-mode LAN port mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port-ssid Bridge LAN port to SSID. string Maximum length: 15
port1-mode LAN port 1 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port1-ssid Bridge LAN port 1 to SSID. string Maximum length: 15
port2-mode LAN port 2 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port2-ssid Bridge LAN port 2 to SSID. string Maximum length: 15
port3-mode LAN port 3 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port3-ssid Bridge LAN port 3 to SSID. string Maximum length: 15
port4-mode LAN port 4 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port4-ssid Bridge LAN port 4 to SSID. string Maximum length: 15
port5-mode LAN port 5 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port5-ssid Bridge LAN port 5 to SSID. string Maximum length: 15
port6-mode LAN port 6 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port6-ssid Bridge LAN port 6 to SSID. string Maximum length: 15
port7-mode LAN port 7 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port7-ssid Bridge LAN port 7 to SSID. string Maximum length: 15
port8-mode LAN port 8 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port8-ssid Bridge LAN port 8 to SSID. string Maximum length: 15
port-esl-mode ESL port mode.
offline: Offline.
nat-to-wan: NAT WTP ESL port to WTP WAN port.
bridge-to-wan: Bridge WTP ESL port to WTP WAN port.
bridge-to-ssid: Bridge WTP ESL port to SSID.
option -
port-esl-ssid Bridge ESL port to SSID. string Maximum length: 15

config deny-mac-list

Parameter Name Description Type Size
mac A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP. mac-address Not Specified

config split-tunneling-acl

Parameter Name Description Type Size
dest-ip Destination IP and mask for the split-tunneling subnet. ipv4-classnet Not Specified

config radio-1

Parameter Name Description Type Size
mode Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 1 is disabled.
ap: Radio 1 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 1 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 1 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-2

Parameter Name Description Type Size
mode Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 2 is disabled.
ap: Radio 2 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 2 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 2 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-3

Parameter Name Description Type Size
mode Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 3 is disabled.
ap: Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 3 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 3 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-4

Parameter Name Description Type Size
mode Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 3 is disabled.
ap: Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 3 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 3 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config lbs

Parameter Name Description Type Size
ekahau-blink-mode Enable/disable Ekahau blink mode (now known as AiRISTA Flow) to track and locate WiFi tags (default = disable).
enable: Enable Ekahau blink mode.
disable: Disable Ekahau blink mode.
option -
ekahau-tag WiFi frame MAC address or WiFi Tag. mac-address Not Specified
erc-server-ip IP address of Ekahau RTLS Controller (ERC). ipv4-address-any Not Specified
erc-server-port Ekahau RTLS Controller (ERC) UDP listening port. integer Minimum value: 1024 Maximum value: 65535
aeroscout Enable/disable AeroScout Real Time Location Service (RTLS) support (default = disable).
enable: Enable AeroScout support.
disable: Disable AeroScout support.
option -
aeroscout-server-ip IP address of AeroScout server. ipv4-address-any Not Specified
aeroscout-server-port AeroScout server UDP listening port. integer Minimum value: 1024 Maximum value: 65535
aeroscout-mu Enable/disable AeroScout Mobile Unit (MU) support (default = disable).
enable: Enable AeroScout MU mode support.
disable: Disable AeroScout MU mode support.
option -
aeroscout-ap-mac Use BSSID or board MAC address as AP MAC address in AeroScout AP messages (default = bssid).
bssid: Use BSSID as AP MAC address in AeroScout AP messages.
board-mac: Use board MAC address as AP MAC address in AeroScout AP messages.
option -
aeroscout-mmu-report Enable/disable compounded AeroScout tag and MU report (default = enable).
enable: Enable compounded AeroScout tag and MU report.
disable: Disable compounded AeroScout tag and MU report.
option -
aeroscout-mu-factor AeroScout MU mode dilution factor (default = 20). integer Minimum value: 0 Maximum value: 4294967295
aeroscout-mu-timeout AeroScout MU mode timeout (0 - 65535 sec, default = 5). integer Minimum value: 0 Maximum value: 65535
fortipresence Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network (default = disable).
foreign: FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.
both: Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.
disable: Disable FortiPresence.
option -
fortipresence-server FortiPresence server IP address. ipv4-address-any Not Specified
fortipresence-port FortiPresence server UDP listening port (default = 3000). integer Minimum value: 300 Maximum value: 65535
fortipresence-secret FortiPresence secret password (max. 16 characters). password Not Specified
fortipresence-project FortiPresence project name (max. 16 characters, default = fortipresence). string Maximum length: 16
fortipresence-frequency FortiPresence report transmit frequency (5 - 65535 sec, default = 30). integer Minimum value: 5 Maximum value: 65535
fortipresence-rogue Enable/disable FortiPresence finding and reporting rogue APs.
enable: Enable FortiPresence finding and reporting rogue APs.
disable: Disable FortiPresence finding and reporting rogue APs.
option -
fortipresence-unassoc Enable/disable FortiPresence finding and reporting unassociated stations.
enable: Enable FortiPresence finding and reporting unassociated stations.
disable: Disable FortiPresence finding and reporting unassociated stations.
option -
fortipresence-ble Enable/disable FortiPresence finding and reporting BLE devices.
enable: Enable FortiPresence finding and reporting BLE devices.
disable: Disable FortiPresence finding and reporting BLE devices.
option -
station-locate Enable/disable client station locating services for all clients, whether associated or not (default = disable).
enable: Enable station locating service.
disable: Disable station locating service.
option -

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

  config wireless-controller wtp-profile
      Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.
      edit <name>
          set comment {var-string}
          config platform
              Description: WTP, FortiAP, or AP platform.
              set type [AP-11N|220B|...]
              set mode [single-5G|dual-5G]
              set ddscan [enable|disable]
          end
          set control-message-offload {option1}, {option2}, ...
          set apcfg-profile {string}
          set ble-profile {string}
          set wan-port-mode [wan-lan|wan-only]
          config lan
              Description: WTP LAN port mapping.
              set port-mode [offline|nat-to-wan|...]
              set port-ssid {string}
              set port1-mode [offline|nat-to-wan|...]
              set port1-ssid {string}
              set port2-mode [offline|nat-to-wan|...]
              set port2-ssid {string}
              set port3-mode [offline|nat-to-wan|...]
              set port3-ssid {string}
              set port4-mode [offline|nat-to-wan|...]
              set port4-ssid {string}
              set port5-mode [offline|nat-to-wan|...]
              set port5-ssid {string}
              set port6-mode [offline|nat-to-wan|...]
              set port6-ssid {string}
              set port7-mode [offline|nat-to-wan|...]
              set port7-ssid {string}
              set port8-mode [offline|nat-to-wan|...]
              set port8-ssid {string}
              set port-esl-mode [offline|nat-to-wan|...]
              set port-esl-ssid {string}
          end
          set energy-efficient-ethernet [enable|disable]
          set led-state [enable|disable]
          set led-schedules <name1>, <name2>, ...
          set dtls-policy {option1}, {option2}, ...
          set dtls-in-kernel [enable|disable]
          set max-clients {integer}
          set handoff-rssi {integer}
          set handoff-sta-thresh {integer}
          set handoff-roaming [enable|disable]
          config deny-mac-list
              Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.
              edit <id>
                  set mac {mac-address}
              next
          end
          set ap-country [NA|AL|...]
          set ip-fragment-preventing {option1}, {option2}, ...
          set tun-mtu-uplink {integer}
          set tun-mtu-downlink {integer}
          set split-tunneling-acl-path [tunnel|local]
          set split-tunneling-acl-local-ap-subnet [enable|disable]
          config split-tunneling-acl
              Description: Split tunneling ACL filter list.
              edit <id>
                  set dest-ip {ipv4-classnet}
              next
          end
          set allowaccess {option1}, {option2}, ...
          set login-passwd-change [yes|default|...]
          set login-passwd {password}
          set lldp [enable|disable]
          set poe-mode [auto|8023af|...]
          set frequency-handoff [enable|disable]
          set ap-handoff [enable|disable]
          config radio-1
              Description: Configuration options for radio 1.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-2
              Description: Configuration options for radio 2.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-3
              Description: Configuration options for radio 3.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config radio-4
              Description: Configuration options for radio 4.
              set mode [disabled|ap|...]
              set band [802.11a|802.11b|...]
              set band-5g-type [5g-full|5g-high|...]
              set airtime-fairness [enable|disable]
              set protection-mode [rtscts|ctsonly|...]
              set powersave-optimize {option1}, {option2}, ...
              set transmit-optimize {option1}, {option2}, ...
              set amsdu [enable|disable]
              set coexistence [enable|disable]
              set zero-wait-dfs [enable|disable]
              set bss-color {integer}
              set short-guard-interval [enable|disable]
              set channel-bonding [160MHz|80MHz|...]
              set auto-power-level [enable|disable]
              set auto-power-high {integer}
              set auto-power-low {integer}
              set power-level {integer}
              set dtim {integer}
              set beacon-interval {integer}
              set rts-threshold {integer}
              set frag-threshold {integer}
              set ap-sniffer-bufsize {integer}
              set ap-sniffer-chan {integer}
              set ap-sniffer-addr {mac-address}
              set ap-sniffer-mgmt-beacon [enable|disable]
              set ap-sniffer-mgmt-probe [enable|disable]
              set ap-sniffer-mgmt-other [enable|disable]
              set ap-sniffer-ctl [enable|disable]
              set ap-sniffer-data [enable|disable]
              set channel-utilization [enable|disable]
              set wids-profile {string}
              set darrp [enable|disable]
              set max-clients {integer}
              set max-distance {integer}
              set vap-all [tunnel|bridge|...]
              set vaps <name1>, <name2>, ...
              set channel <chan1>, <chan2>, ...
              set call-admission-control [enable|disable]
              set call-capacity {integer}
              set bandwidth-admission-control [enable|disable]
              set bandwidth-capacity {integer}
          end
          config lbs
              Description: Set various location based service (LBS) options.
              set ekahau-blink-mode [enable|disable]
              set ekahau-tag {mac-address}
              set erc-server-ip {ipv4-address-any}
              set erc-server-port {integer}
              set aeroscout [enable|disable]
              set aeroscout-server-ip {ipv4-address-any}
              set aeroscout-server-port {integer}
              set aeroscout-mu [enable|disable]
              set aeroscout-ap-mac [bssid|board-mac]
              set aeroscout-mmu-report [enable|disable]
              set aeroscout-mu-factor {integer}
              set aeroscout-mu-timeout {integer}
              set fortipresence [foreign|both|...]
              set fortipresence-server {ipv4-address-any}
              set fortipresence-port {integer}
              set fortipresence-secret {password}
              set fortipresence-project {string}
              set fortipresence-frequency {integer}
              set fortipresence-rogue [enable|disable]
              set fortipresence-unassoc [enable|disable]
              set fortipresence-ble [enable|disable]
              set station-locate [enable|disable]
          end
          set ext-info-enable [enable|disable]
      next
  end

config wireless-controller wtp-profile

Parameter Name Description Type Size
comment Comment. var-string Maximum length: 255
control-message-offload Enable/disable CAPWAP control message data channel offload.
ebp-frame: Ekahau blink protocol (EBP) frames.
aeroscout-tag: AeroScout tag.
ap-list: Rogue AP list.
sta-list: Rogue STA list.
sta-cap-list: STA capability list.
stats: WTP, radio, VAP, and STA statistics.
aeroscout-mu: AeroScout Mobile Unit (MU) report.
sta-health: STA health log.
spectral-analysis: Spectral analysis report.
option -
apcfg-profile AP local configuration profile name. string Maximum length: 35
ble-profile Bluetooth Low Energy profile name. string Maximum length: 35
wan-port-mode Enable/disable using a WAN port as a LAN port.
wan-lan: Enable using a WAN port as a LAN port.
wan-only: Disable using a WAN port as a LAN port.
option -
energy-efficient-ethernet Enable/disable use of energy efficient Ethernet on WTP.
enable: Enable use of energy efficient Ethernet on WTP.
disable: Disable use of energy efficient Ethernet on WTP.
option -
led-state Enable/disable use of LEDs on WTP (default = disable).
enable: Enable use of LEDs on WTP.
disable: Disable use of LEDs on WTP.
option -
led-schedules <name> Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.
Schedule name.
string Maximum length: 35
dtls-policy WTP data channel DTLS policy (default = clear-text).
clear-text: Clear Text Data Channel.
dtls-enabled: DTLS Enabled Data Channel.
ipsec-vpn: IPsec VPN Data Channel.
option -
dtls-in-kernel Enable/disable data channel DTLS in kernel.
enable: Enable data channel DTLS in kernel.
disable: Disable data channel DTLS in kernel.
option -
max-clients Maximum number of stations (STAs) supported by the WTP (default = 0, meaning no client limitation). integer Minimum value: 0 Maximum value: 4294967295
handoff-rssi Minimum received signal strength indicator (RSSI) value for handoff (20 - 30, default = 25). integer Minimum value: 20 Maximum value: 30
handoff-sta-thresh Threshold value for AP handoff. integer Minimum value: 0 Maximum value: 4294967295
handoff-roaming Enable/disable client load balancing during roaming to avoid roaming delay (default = disable).
enable: Enable handoff roaming.
disable: Disable handoff roaming.
option -
ap-country
ip-fragment-preventing Method(s) by which IP fragmentation is prevented for control and data packets through CAPWAP tunnel (default = tcp-mss-adjust).
tcp-mss-adjust: TCP maximum segment size adjustment.
icmp-unreachable: Drop packet and send ICMP Destination Unreachable
option -
tun-mtu-uplink The maximum transmission unit (MTU) of uplink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). integer Minimum value: 576 Maximum value: 1500
tun-mtu-downlink The MTU of downlink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). integer Minimum value: 576 Maximum value: 1500
split-tunneling-acl-path Split tunneling ACL path is local/tunnel.
tunnel: Split tunneling ACL list traffic will be tunnel.
local: Split tunneling ACL list traffic will be local NATed.
option -
split-tunneling-acl-local-ap-subnet Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL (default = disable).
enable: Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
disable: Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.
option -
allowaccess Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.
https: HTTPS access.
ssh: SSH access.
snmp: SNMP access.
option -
login-passwd-change Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no, default = no).
yes: Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.
default: Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.
no: Do not change the managed WTP, FortiAP or AP's administrator password.
option -
login-passwd Set the managed WTP, FortiAP, or AP's administrator password. password Not Specified
lldp Enable/disable Link Layer Discovery Protocol (LLDP) for the WTP, FortiAP, or AP (default = enable).
enable: Enable LLDP.
disable: Disable LLDP.
option -
poe-mode Set the WTP, FortiAP, or AP's PoE mode.
auto: Automatically detect the PoE mode.
8023af: Use 802.3af PoE mode.
8023at: Use 802.3at PoE mode.
power-adapter: Use the power adapter to control the PoE mode.
option -
frequency-handoff Enable/disable frequency handoff of clients to other channels (default = disable).
enable: Enable frequency handoff.
disable: Disable frequency handoff.
option -
ap-handoff Enable/disable AP handoff of clients to other APs (default = disable).
enable: Enable AP handoff.
disable: Disable AP handoff.
option -
ext-info-enable Enable/disable station/VAP/radio extension information.
enable: Enable station/VAP/radio extension information.
disable: Disable station/VAP/radio extension information.
option -

config platform

Parameter Name Description Type Size
type WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.
AP-11N: Default 11n AP.
220B: FAP220B/221B.
210B: FAP210B.
222B: FAP222B.
112B: FAP112B.
320B: FAP320B.
11C: FAP11C.
14C: FAP14C.
223B: FAP223B.
28C: FAP28C.
320C: FAP320C.
221C: FAP221C.
25D: FAP25D.
222C: FAP222C.
224D: FAP224D.
214B: FK214B.
21D: FAP21D.
24D: FAP24D.
112D: FAP112D.
223C: FAP223C.
321C: FAP321C.
C220C: FAPC220C.
C225C: FAPC225C.
C23JD: FAPC23JD.
C24JE: FAPC24JE.
S321C: FAPS321C.
S322C: FAPS322C.
S323C: FAPS323C.
S311C: FAPS311C.
S313C: FAPS313C.
S321CR: FAPS321CR.
S322CR: FAPS322CR.
S323CR: FAPS323CR.
S421E: FAPS421E.
S422E: FAPS422E.
S423E: FAPS423E.
421E: FAP421E.
423E: FAP423E.
221E: FAP221E.
222E: FAP222E.
223E: FAP223E.
224E: FAP224E.
231E: FAP231E.
S221E: FAPS221E.
S223E: FAPS223E.
321E: FAP321E.
431F: FAP431F.
432F: FAP432F.
433F: FAP433F.
231F: FAP231F.
234F: FAP234F.
23JF: FAP23JF.
U421E: FAPU421EV.
U422EV: FAPU422EV.
U423E: FAPU423EV.
U221EV: FAPU221EV.
U223EV: FAPU223EV.
U24JEV: FAPU24JEV.
U321EV: FAPU321EV.
U323EV: FAPU323EV.
U431F: FAPU431F.
U433F: FAPU433F.
option -
mode Configure operation mode of 5G radios (default = single-5G).
single-5G: Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.
dual-5G: Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.
option -
ddscan Enable/disable use of one radio for dedicated dual-band scanning to detect RF characterization and wireless threat management.
enable: Enable dedicated dual-band scan mode.
disable: Disable dedicated dual-band scan mode.
option -

config lan

Parameter Name Description Type Size
port-mode LAN port mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port-ssid Bridge LAN port to SSID. string Maximum length: 15
port1-mode LAN port 1 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port1-ssid Bridge LAN port 1 to SSID. string Maximum length: 15
port2-mode LAN port 2 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port2-ssid Bridge LAN port 2 to SSID. string Maximum length: 15
port3-mode LAN port 3 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port3-ssid Bridge LAN port 3 to SSID. string Maximum length: 15
port4-mode LAN port 4 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port4-ssid Bridge LAN port 4 to SSID. string Maximum length: 15
port5-mode LAN port 5 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port5-ssid Bridge LAN port 5 to SSID. string Maximum length: 15
port6-mode LAN port 6 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port6-ssid Bridge LAN port 6 to SSID. string Maximum length: 15
port7-mode LAN port 7 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port7-ssid Bridge LAN port 7 to SSID. string Maximum length: 15
port8-mode LAN port 8 mode.
offline: Offline.
nat-to-wan: NAT WTP LAN port to WTP WAN port.
bridge-to-wan: Bridge WTP LAN port to WTP WAN port.
bridge-to-ssid: Bridge WTP LAN port to SSID.
option -
port8-ssid Bridge LAN port 8 to SSID. string Maximum length: 15
port-esl-mode ESL port mode.
offline: Offline.
nat-to-wan: NAT WTP ESL port to WTP WAN port.
bridge-to-wan: Bridge WTP ESL port to WTP WAN port.
bridge-to-ssid: Bridge WTP ESL port to SSID.
option -
port-esl-ssid Bridge ESL port to SSID. string Maximum length: 15

config deny-mac-list

Parameter Name Description Type Size
mac A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP. mac-address Not Specified

config split-tunneling-acl

Parameter Name Description Type Size
dest-ip Destination IP and mask for the split-tunneling subnet. ipv4-classnet Not Specified

config radio-1

Parameter Name Description Type Size
mode Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 1 is disabled.
ap: Radio 1 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 1 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 1 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-2

Parameter Name Description Type Size
mode Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 2 is disabled.
ap: Radio 2 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 2 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 2 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-3

Parameter Name Description Type Size
mode Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 3 is disabled.
ap: Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 3 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 3 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config radio-4

Parameter Name Description Type Size
mode Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.
disabled: Radio 3 is disabled.
ap: Radio 3 operates as an access point that allows WiFi clients to connect to your network.
monitor: Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.
sniffer: Radio 3 operates as a sniffer capturing WiFi frames on air.
option -
band WiFi band that Radio 3 operates on.
802.11a: 802.11a.
802.11b: 802.11b.
802.11g: 802.11g/b.
802.11n: 802.11n/g/b at 2.4GHz.
802.11n-5G: 802.11n/a at 5GHz.
802.11ac: 802.11ac/n/a.
802.11ax-5G: 802.11ax/ac/n/a at 5GHz.
802.11ax: 802.11ax/n/g/b at 2.4GHz.
802.11ac-2G: 802.11ac at 2.4GHz.
802.11n,g-only: 802.11n/g at 2.4GHz.
802.11g-only: 802.11g.
802.11n-only: 802.11n at 2.4GHz.
802.11n-5G-only: 802.11n at 5GHz.
802.11ac,n-only: 802.11ac/n.
802.11ac-only: 802.11ac.
802.11ax,ac-only: 802.11ax/ac at 5GHz.
802.11ax,ac,n-only: 802.11ax/ac/n at 5GHz.
802.11ax-5G-only: 802.11ax at 5GHz.
802.11ax,n-only: 802.11ax/n at 2.4GHz.
802.11ax,n,g-only: 802.11ax/n/g at 2.4GHz.
802.11ax-only: 802.11ax at 2.4GHz.
option -
band-5g-type WiFi 5G band type.
5g-full: Full 5G band.
5g-high: High 5G band.
5g-low: Low 5G band.
option -
airtime-fairness Enable/disable airtime fairness (default = disable).
enable: Enable airtime fairness (ATF) support.
disable: Disable airtime fairness (ATF) support.
option -
protection-mode Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).
rtscts: Enable 802.11g protection RTS/CTS mode.
ctsonly: Enable 802.11g protection CTS only mode.
disable: Disable 802.11g protection mode.
option -
powersave-optimize Enable client power-saving features such as TIM, AC VO, and OBSS etc.
tim: TIM bit for client in power save mode.
ac-vo: Use AC VO priority to send out packets in the power save queue.
no-obss-scan: Do not put OBSS scan IE into beacon and probe response frames.
no-11b-rate: Do not send frame using 11b data rate.
client-rate-follow: Adapt transmitting PHY rate with receiving PHY rate from a client.
option -
transmit-optimize Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.
disable: Disable packet transmission optimization.
power-save: Tag client as operating in power save mode if excessive transmit retries occur.
aggr-limit: Set aggregation limit to a lower value when data rate is low.
retry-limit: Set software retry limit to a lower value when data rate is low.
send-bar: Limit transmission of BAR frames.
option -
amsdu Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients (default = enable).
enable: Enable AMSDU support.
disable: Disable AMSDU support.
option -
coexistence Enable/disable allowing both HT20 and HT40 on the same radio (default = enable).
enable: Enable support for both HT20 and HT40 on the same radio.
disable: Disable support for both HT20 and HT40 on the same radio.
option -
zero-wait-dfs Enable/disable zero wait DFS on radio (default = enable).
enable: Enable zero wait DFS
disable: Disable zero wait DFS
option -
bss-color BSS color value for this 11ax radio (0 - 63, 0 means disable. default = 0). integer Minimum value: 0 Maximum value: 63
short-guard-interval Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.
enable: Select the 400 ns short guard interval (Short GI).
disable: Select the 800 ns long guard interval (Long GI).
option -
channel-bonding Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.
160MHz: 160 MHz channel width.
80MHz: 80 MHz channel width.
40MHz: 40 MHz channel width.
20MHz: 20 MHz channel width.
option -
auto-power-level Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable).
enable: Enable automatic transmit power adjustment.
disable: Disable automatic transmit power adjustment.
option -
auto-power-high The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
auto-power-low The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). integer Minimum value: 0 Maximum value: 4294967295
power-level Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). integer Minimum value: 0 Maximum value: 100
dtim Delivery Traffic Indication Map (DTIM) period (1 - 255, default = 1). Set higher to save battery life of WiFi client in power-save mode. integer Minimum value: 1 Maximum value: 255
beacon-interval Beacon interval. The time between beacon frames in msec (the actual range of beacon interval depends on the AP platform type, default = 100). integer Minimum value: 0 Maximum value: 65535
rts-threshold Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS (256 - 2346 bytes, default = 2346). integer Minimum value: 256 Maximum value: 2346
frag-threshold Maximum packet size that can be sent without fragmentation (800 - 2346 bytes, default = 2346). integer Minimum value: 800 Maximum value: 2346
ap-sniffer-bufsize Sniffer buffer size (1 - 32 MB, default = 16). integer Minimum value: 1 Maximum value: 32
ap-sniffer-chan Channel on which to operate the sniffer (default = 6). integer Minimum value: 0 Maximum value: 4294967295
ap-sniffer-addr MAC address to monitor. mac-address Not Specified
ap-sniffer-mgmt-beacon Enable/disable sniffer on WiFi management Beacon frames (default = enable).
enable: Enable sniffer on WiFi management beacon frame.
disable: Disable sniffer on WiFi management beacon frame.
option -
ap-sniffer-mgmt-probe Enable/disable sniffer on WiFi management probe frames (default = enable).
enable: Enable sniffer on WiFi management probe frame.
disable: Enable sniffer on WiFi management probe frame.
option -
ap-sniffer-mgmt-other Enable/disable sniffer on WiFi management other frames (default = enable).
enable: Enable sniffer on WiFi management other frame.
disable: Disable sniffer on WiFi management other frame.
option -
ap-sniffer-ctl Enable/disable sniffer on WiFi control frame (default = enable).
enable: Enable sniffer on WiFi control frame.
disable: Disable sniffer on WiFi control frame.
option -
ap-sniffer-data Enable/disable sniffer on WiFi data frame (default = enable).
enable: Enable sniffer on WiFi data frame
disable: Disable sniffer on WiFi data frame
option -
channel-utilization Enable/disable measuring channel utilization.
enable: Enable measuring channel utilization.
disable: Disable measuring channel utilization.
option -
wids-profile Wireless Intrusion Detection System (WIDS) profile name to assign to the radio. string Maximum length: 35
darrp Enable/disable Distributed Automatic Radio Resource Provisioning (DARRP) to make sure the radio is always using the most optimal channel (default = disable).
enable: Enable distributed automatic radio resource provisioning.
disable: Disable distributed automatic radio resource provisioning.
option -
max-clients Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware. integer Minimum value: 0 Maximum value: 4294967295
max-distance Maximum expected distance between the AP and clients (0 - 54000 m, default = 0). integer Minimum value: 0 Maximum value: 54000
vap-all Configure method for assigning SSIDs to this FortiAP (default = automatically assign tunnel SSIDs).
tunnel: Automatically select tunnel SSIDs.
bridge: Automatically select local-bridging SSIDs.
manual: Manually select SSIDs.
option -
vaps <name> Manually selected list of Virtual Access Points (VAPs).
Virtual Access Point (VAP) name.
string Maximum length: 35
channel <chan> Selected list of wireless radio channels.
Channel number.
string Maximum length: 3
call-admission-control Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.
enable: Enable WMM call admission control.
disable: Disable WMM call admission control.
option -
call-capacity Maximum number of Voice over WLAN (VoWLAN) phones supported by the radio (0 - 60, default = 10). integer Minimum value: 0 Maximum value: 60
bandwidth-admission-control Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.
enable: Enable WMM bandwidth admission control.
disable: Disable WMM bandwidth admission control.
option -
bandwidth-capacity Maximum bandwidth capacity allowed (1 - 600000 Kbps, default = 2000). integer Minimum value: 1 Maximum value: 600000

config lbs

Parameter Name Description Type Size
ekahau-blink-mode Enable/disable Ekahau blink mode (now known as AiRISTA Flow) to track and locate WiFi tags (default = disable).
enable: Enable Ekahau blink mode.
disable: Disable Ekahau blink mode.
option -
ekahau-tag WiFi frame MAC address or WiFi Tag. mac-address Not Specified
erc-server-ip IP address of Ekahau RTLS Controller (ERC). ipv4-address-any Not Specified
erc-server-port Ekahau RTLS Controller (ERC) UDP listening port. integer Minimum value: 1024 Maximum value: 65535
aeroscout Enable/disable AeroScout Real Time Location Service (RTLS) support (default = disable).
enable: Enable AeroScout support.
disable: Disable AeroScout support.
option -
aeroscout-server-ip IP address of AeroScout server. ipv4-address-any Not Specified
aeroscout-server-port AeroScout server UDP listening port. integer Minimum value: 1024 Maximum value: 65535
aeroscout-mu Enable/disable AeroScout Mobile Unit (MU) support (default = disable).
enable: Enable AeroScout MU mode support.
disable: Disable AeroScout MU mode support.
option -
aeroscout-ap-mac Use BSSID or board MAC address as AP MAC address in AeroScout AP messages (default = bssid).
bssid: Use BSSID as AP MAC address in AeroScout AP messages.
board-mac: Use board MAC address as AP MAC address in AeroScout AP messages.
option -
aeroscout-mmu-report Enable/disable compounded AeroScout tag and MU report (default = enable).
enable: Enable compounded AeroScout tag and MU report.
disable: Disable compounded AeroScout tag and MU report.
option -
aeroscout-mu-factor AeroScout MU mode dilution factor (default = 20). integer Minimum value: 0 Maximum value: 4294967295
aeroscout-mu-timeout AeroScout MU mode timeout (0 - 65535 sec, default = 5). integer Minimum value: 0 Maximum value: 65535
fortipresence Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network (default = disable).
foreign: FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.
both: Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.
disable: Disable FortiPresence.
option -
fortipresence-server FortiPresence server IP address. ipv4-address-any Not Specified
fortipresence-port FortiPresence server UDP listening port (default = 3000). integer Minimum value: 300 Maximum value: 65535
fortipresence-secret FortiPresence secret password (max. 16 characters). password Not Specified
fortipresence-project FortiPresence project name (max. 16 characters, default = fortipresence). string Maximum length: 16
fortipresence-frequency FortiPresence report transmit frequency (5 - 65535 sec, default = 30). integer Minimum value: 5 Maximum value: 65535
fortipresence-rogue Enable/disable FortiPresence finding and reporting rogue APs.
enable: Enable FortiPresence finding and reporting rogue APs.
disable: Disable FortiPresence finding and reporting rogue APs.
option -
fortipresence-unassoc Enable/disable FortiPresence finding and reporting unassociated stations.
enable: Enable FortiPresence finding and reporting unassociated stations.
disable: Disable FortiPresence finding and reporting unassociated stations.
option -
fortipresence-ble Enable/disable FortiPresence finding and reporting BLE devices.
enable: Enable FortiPresence finding and reporting BLE devices.
disable: Disable FortiPresence finding and reporting BLE devices.
option -
station-locate Enable/disable client station locating services for all clients, whether associated or not (default = disable).
enable: Enable station locating service.
disable: Disable station locating service.
option -