config firewall multicast-policy6
Configure IPv6 multicast NAT policies.
config firewall multicast-policy6 Description: Configure IPv6 multicast NAT policies. edit <id> set action [accept|deny] set auto-asic-offload [enable|disable] set dstaddr <name1>, <name2>, ... set dstintf {string} set end-port {integer} set logtraffic [enable|disable] set name {string} set protocol {integer} set srcaddr <name1>, <name2>, ... set srcintf {string} set start-port {integer} set status [enable|disable] next end
config firewall multicast-policy6
Parameter |
Description |
Type |
Size |
Default |
||||||
---|---|---|---|---|---|---|---|---|---|---|
action |
Accept or deny traffic matching the policy. |
option |
- |
accept |
||||||
|
|
|||||||||
auto-asic-offload * |
Enable/disable offloading policy traffic for hardware acceleration. |
option |
- |
enable |
||||||
|
|
|||||||||
dstaddr |
IPv6 destination address name. Address name. |
string |
Maximum length: 79 |
|
||||||
dstintf |
IPv6 destination interface name. |
string |
Maximum length: 35 |
|
||||||
end-port |
Integer value for ending TCP/UDP/SCTP destination port in range. |
integer |
Minimum value: 0 Maximum value: 65535 |
65535 |
||||||
id |
Policy ID. |
integer |
Minimum value: 0 Maximum value: 4294967294 |
0 |
||||||
logtraffic |
Enable/disable logging traffic accepted by this policy. |
option |
- |
disable |
||||||
|
|
|||||||||
name |
Policy name. |
string |
Maximum length: 35 |
|
||||||
protocol |
Integer value for the protocol type as defined by IANA. |
integer |
Minimum value: 0 Maximum value: 255 |
0 |
||||||
srcaddr |
IPv6 source address name. Address name. |
string |
Maximum length: 79 |
|
||||||
srcintf |
IPv6 source interface name. |
string |
Maximum length: 35 |
|
||||||
start-port |
Integer value for starting TCP/UDP/SCTP destination port in range. |
integer |
Minimum value: 0 Maximum value: 65535 |
1 |
||||||
status |
Enable/disable this policy. |
option |
- |
enable |
||||||
|
|
* This parameter may not exist in some models.