get hardware npu np6

You can use the get hardware npu np6 command to display information about the NP6 processors in your FortiGate and the sessions they are processing. This command contains a subset of the options available from the diagnose npu np6 command. The command syntax is:

get hardware npu np6 {dce <np6-id> | ipsec-stats | port-list | session-stats <np6-id> | sse-stats <np6-id> | synproxy-stats}

<np6-id> identifies the NP6 processor. 0 is np6_0, 1 is np6_1 and so on.

dce show NP6 non-zero sub-engine drop counters for the selected NP6.

ipsec-stats show overall NP6 IPsec offloading statistics.

port-list show the mapping between the FortiGate physical interfaces and NP6 processors.

session-stats show NP6 session offloading statistics counters for the selected NP6.

sse-stats show hardware session statistics counters.

synproxy-stats show overall NP6 synproxy statistics for TCP connections identified as being syn proxy DoS attacks.