config firewall ldb-monitor
Description: Configure server load balancing health monitors.
edit <name>
set type [ping|tcp|...]
set interval {integer}
set timeout {integer}
set retry {integer}
set port {integer}
set src-ip {ipv4-address}
set http-get {string}
set http-match {string}
set http-max-redirects {integer}
next
end
Parameter Name | Description | Type | Size | |||
---|---|---|---|---|---|---|
type | Select the Monitor type used by the health check monitor to check the health of the server (PING | TCP | HTTP | HTTPS). ping: PING health monitor. tcp: TCP-connect health monitor. http: HTTP-GET health monitor. https: HTTP-GET health monitor with SSL. passive-sip: passive-sip health monitor |
option | - |
interval | Time between health checks (5 - 65635 sec, default = 10). | integer | Minimum value: 5 Maximum value: 65535 | |||
timeout | Time to wait to receive response to a health check from a server. Reaching the timeout means the health check failed (1 - 255 sec, default = 2). | integer | Minimum value: 1 Maximum value: 255 | |||
retry | Number health check attempts before the server is considered down (1 - 255, default = 3). | integer | Minimum value: 1 Maximum value: 255 | |||
port | Service port used to perform the health check. If 0, health check monitor inherits port configured for the server (0 - 65635, default = 0). | integer | Minimum value: 0 Maximum value: 65535 | |||
src-ip | Source IP for ldb-monitor. | ipv4-address | Not Specified | |||
http-get | URL used to send a GET request to check the health of an HTTP server. | string | Maximum length: 255 | |||
http-match | String to match the value expected in response to an HTTP-GET request. | string | Maximum length: 255 | |||
http-max-redirects | The maximum number of HTTP redirects to be allowed (0 - 5, default = 0). | integer | Minimum value: 0 Maximum value: 5 |
config firewall ldb-monitor
Description: Configure server load balancing health monitors.
edit <name>
set type [ping|tcp|...]
set interval {integer}
set timeout {integer}
set retry {integer}
set port {integer}
set src-ip {ipv4-address}
set http-get {string}
set http-match {string}
set http-max-redirects {integer}
next
end
Parameter Name | Description | Type | Size | |||
---|---|---|---|---|---|---|
type | Select the Monitor type used by the health check monitor to check the health of the server (PING | TCP | HTTP | HTTPS). ping: PING health monitor. tcp: TCP-connect health monitor. http: HTTP-GET health monitor. https: HTTP-GET health monitor with SSL. passive-sip: passive-sip health monitor |
option | - |
interval | Time between health checks (5 - 65635 sec, default = 10). | integer | Minimum value: 5 Maximum value: 65535 | |||
timeout | Time to wait to receive response to a health check from a server. Reaching the timeout means the health check failed (1 - 255 sec, default = 2). | integer | Minimum value: 1 Maximum value: 255 | |||
retry | Number health check attempts before the server is considered down (1 - 255, default = 3). | integer | Minimum value: 1 Maximum value: 255 | |||
port | Service port used to perform the health check. If 0, health check monitor inherits port configured for the server (0 - 65635, default = 0). | integer | Minimum value: 0 Maximum value: 65535 | |||
src-ip | Source IP for ldb-monitor. | ipv4-address | Not Specified | |||
http-get | URL used to send a GET request to check the health of an HTTP server. | string | Maximum length: 255 | |||
http-match | String to match the value expected in response to an HTTP-GET request. | string | Maximum length: 255 | |||
http-max-redirects | The maximum number of HTTP redirects to be allowed (0 - 5, default = 0). | integer | Minimum value: 0 Maximum value: 5 |