Fortinet black logo

CLI Reference

config wireless-controller wtp-profile

config wireless-controller wtp-profile

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

config wireless-controller wtp-profile

Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

edit <name>

set comment {var-string}

config platform

Description: WTP, FortiAP, or AP platform.

set type [AP-11N|220B|...]

set mode [single-5G|dual-5G]

set ddscan [enable|disable]

end

set control-message-offload {option1}, {option2}, ...

set ble-profile {string}

set wan-port-mode [wan-lan|wan-only]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

end

set energy-efficient-ethernet [enable|disable]

set led-state [enable|disable]

set led-schedules <name1>, <name2>, ...

set dtls-policy {option1}, {option2}, ...

set dtls-in-kernel [enable|disable]

set max-clients {integer}

set handoff-rssi {integer}

set handoff-sta-thresh {integer}

set handoff-roaming [enable|disable]

config deny-mac-list

Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.

edit <id>

set mac {mac-address}

next

end

set ap-country [NA|AL|...]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

next

end

set allowaccess {option1}, {option2}, ...

set login-passwd-change [yes|default|...]

set login-passwd {password}

set lldp [enable|disable]

set poe-mode [auto|8023af|...]

config radio-1

Description: Configuration options for radio 1.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-2

Description: Configuration options for radio 2.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-3

Description: Configuration options for radio 3.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-4

Description: Configuration options for radio 4.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config lbs

Description: Set various location based service (LBS) options.

set ekahau-blink-mode [enable|disable]

set ekahau-tag {mac-address}

set erc-server-ip {ipv4-address-any}

set erc-server-port {integer}

set aeroscout [enable|disable]

set aeroscout-server-ip {ipv4-address-any}

set aeroscout-server-port {integer}

set aeroscout-mu [enable|disable]

set aeroscout-ap-mac [bssid|board-mac]

set aeroscout-mmu-report [enable|disable]

set aeroscout-mu-factor {integer}

set aeroscout-mu-timeout {integer}

set fortipresence [foreign|both|...]

set fortipresence-server {ipv4-address-any}

set fortipresence-port {integer}

set fortipresence-secret {password}

set fortipresence-project {string}

set fortipresence-frequency {integer}

set fortipresence-rogue [enable|disable]

set fortipresence-unassoc [enable|disable]

set fortipresence-ble [enable|disable]

set station-locate [enable|disable]

end

set ext-info-enable [enable|disable]

next

end

config wireless-controller wtp-profile

Parameter

Description

Type

Size

comment

Comment.

var-string

Maximum length: 255

control-message-offload

Enable/disable CAPWAP control message data channel offload.

option

-

Option

Description

ebp-frame

Ekahau blink protocol (EBP) frames.

aeroscout-tag

AeroScout tag.

ap-list

Rogue AP list.

sta-list

Rogue STA list.

sta-cap-list

STA capability list.

stats

WTP, radio, VAP, and STA statistics.

aeroscout-mu

AeroScout Mobile Unit (MU) report.

sta-health

STA health log.

ble-profile

Bluetooth Low Energy profile name.

string

Maximum length: 35

wan-port-mode

Enable/disable using a WAN port as a LAN port.

option

-

Option

Description

wan-lan

Enable using a WAN port as a LAN port.

wan-only

Disable using a WAN port as a LAN port.

energy-efficient-ethernet

Enable/disable use of energy efficient Ethernet on WTP.

option

-

Option

Description

enable

Enable use of energy efficient Ethernet on WTP.

disable

Disable use of energy efficient Ethernet on WTP.

led-state

Enable/disable use of LEDs on WTP .

option

-

Option

Description

enable

Enable use of LEDs on WTP.

disable

Disable use of LEDs on WTP.

led-schedules <name>

Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.

Schedule name.

string

Maximum length: 35

dtls-policy

WTP data channel DTLS policy .

option

-

Option

Description

clear-text

Clear Text Data Channel.

dtls-enabled

DTLS Enabled Data Channel.

ipsec-vpn

IPsec VPN Data Channel.

dtls-in-kernel

Enable/disable data channel DTLS in kernel.

option

-

Option

Description

enable

Enable data channel DTLS in kernel.

disable

Disable data channel DTLS in kernel.

max-clients

Maximum number of stations .

integer

Minimum value: 0 Maximum value: 4294967295

handoff-rssi

Minimum received signal strength indicator .

integer

Minimum value: 20 Maximum value: 30

handoff-sta-thresh

Threshold value for AP handoff.

integer

Minimum value: 0 Maximum value: 4294967295

handoff-roaming

Enable/disable client load balancing during roaming to avoid roaming delay .

option

-

Option

Description

enable

Enable handoff roaming.

disable

Disable handoff roaming.

ap-country

Country in which this WTP, FortiAP or AP will operate .

option

-

Option

Description

NA

NO_COUNTRY_SET

AL

ALBANIA

DZ

ALGERIA

AO

ANGOLA

AR

ARGENTINA

AM

ARMENIA

AU

AUSTRALIA

AT

AUSTRIA

AZ

AZERBAIJAN

BS

BAHAMAS

BH

BAHRAIN

BD

BANGLADESH

BB

BARBADOS

BY

BELARUS

BE

BELGIUM

BZ

BELIZE

BO

BOLIVIA

BA

BOSNIA AND HERZEGOVINA

BR

BRAZIL

BN

BRUNEI DARUSSALAM

BG

BULGARIA

KH

CAMBODIA

CF

CENTRAL AFRICA REPUBLIC

CL

CHILE

CN

CHINA

CO

COLOMBIA

CR

COSTA RICA

HR

CROATIA

CY

CYPRUS

CZ

CZECH REPUBLIC

DK

DENMARK

DO

DOMINICAN REPUBLIC

EC

ECUADOR

EG

EGYPT

SV

EL SALVADOR

EE

ESTONIA

FI

FINLAND

FR

FRANCE

GE

GEORGIA

DE

GERMANY

GR

GREECE

GL

GREENLAND

GD

GRENADA

GU

GUAM

GT

GUATEMALA

HT

HAITI

HN

HONDURAS

HK

HONG KONG

HU

HUNGARY

IS

ICELAND

IN

INDIA

ID

INDONESIA

IR

IRAN

IE

IRELAND

IL

ISRAEL

IT

ITALY

JM

JAMAICA

JO

JORDAN

KZ

KAZAKHSTAN

KE

KENYA

KP

NORTH KOREA

KR

KOREA REPUBLIC

KW

KUWAIT

LV

LATVIA

LB

LEBANON

LI

LIECHTENSTEIN

LT

LITHUANIA

LU

LUXEMBOURG

MO

MACAU SAR

MK

MACEDONIA, FYRO

MY

MALAYSIA

MT

MALTA

MX

MEXICO

MC

MONACO

MA

MOROCCO

MZ

MOZAMBIQUE

MM

MYANMAR

NP

NEPAL

NL

NETHERLANDS

AN

NETHERLANDS ANTILLES

AW

ARUBA

NZ

NEW ZEALAND

NO

NORWAY

OM

OMAN

PK

PAKISTAN

PA

PANAMA

PG

PAPUA NEW GUINEA

PY

PARAGUAY

PE

PERU

PH

PHILIPPINES

PL

POLAND

PT

PORTUGAL

PR

PUERTO RICO

QA

QATAR

RO

ROMANIA

RU

RUSSIA

RW

RWANDA

SA

SAUDI ARABIA

RS

REPUBLIC OF SERBIA

ME

MONTENEGRO

SG

SINGAPORE

SK

SLOVAKIA

SI

SLOVENIA

ZA

SOUTH AFRICA

ES

SPAIN

LK

SRI LANKA

SE

SWEDEN

SD

SUDAN

CH

SWITZERLAND

SY

SYRIAN ARAB REPUBLIC

TW

TAIWAN

TZ

TANZANIA

TH

THAILAND

TT

TRINIDAD AND TOBAGO

TN

TUNISIA

TR

TURKEY

AE

UNITED ARAB EMIRATES

UA

UKRAINE

GB

UNITED KINGDOM

US

UNITED STATES2

PS

UNITED STATES (PUBLIC SAFETY)

UY

URUGUAY

UZ

UZBEKISTAN

VE

VENEZUELA

VN

VIET NAM

YE

YEMEN

ZB

ZAMBIA

ZW

ZIMBABWE

JP

JAPAN14

CA

CANADA2

ip-fragment-preventing

Method.

option

-

Option

Description

tcp-mss-adjust

TCP maximum segment size adjustment.

icmp-unreachable

Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

-

Option

Description

tunnel

Split tunneling ACL list traffic will be tunnel.

local

Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

-

Option

Description

enable

Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

disable

Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

-

Option

Description

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

login-passwd-change

Change or reset the administrator password of a managed WTP, FortiAP or AP .

option

-

Option

Description

yes

Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.

default

Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.

no

Do not change the managed WTP, FortiAP or AP's administrator password.

login-passwd

Set the managed WTP, FortiAP, or AP's administrator password.

password

Not Specified

lldp

Enable/disable Link Layer Discovery Protocol .

option

-

Option

Description

enable

Enable LLDP.

disable

Disable LLDP.

poe-mode

Set the WTP, FortiAP, or AP's PoE mode.

option

-

Option

Description

auto

Automatically detect the PoE mode.

8023af

Use 802.3af PoE mode.

8023at

Use 802.3at PoE mode.

power-adapter

Use the power adapter to control the PoE mode.

ext-info-enable

Enable/disable station/VAP/radio extension information.

option

-

Option

Description

enable

Enable station/VAP/radio extension information.

disable

Disable station/VAP/radio extension information.

config platform

Parameter

Description

Type

Size

type

WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.

option

-

Option

Description

AP-11N

Default 11n AP.

220B

FAP220B/221B.

210B

FAP210B.

222B

FAP222B.

112B

FAP112B.

320B

FAP320B.

11C

FAP11C.

14C

FAP14C.

223B

FAP223B.

28C

FAP28C.

320C

FAP320C.

221C

FAP221C.

25D

FAP25D.

222C

FAP222C.

224D

FAP224D.

214B

FK214B.

21D

FAP21D.

24D

FAP24D.

112D

FAP112D.

223C

FAP223C.

321C

FAP321C.

C220C

FAPC220C.

C225C

FAPC225C.

C23JD

FAPC23JD.

C24JE

FAPC24JE.

S321C

FAPS321C.

S322C

FAPS322C.

S323C

FAPS323C.

S311C

FAPS311C.

S313C

FAPS313C.

S321CR

FAPS321CR.

S322CR

FAPS322CR.

S323CR

FAPS323CR.

S421E

FAPS421E.

S422E

FAPS422E.

S423E

FAPS423E.

421E

FAP421E.

423E

FAP423E.

221E

FAP221E.

222E

FAP222E.

223E

FAP223E.

224E

FAP224E.

231E

FAP231E.

S221E

FAPS221E.

S223E

FAPS223E.

321E

FAP321E.

431F

FAP431F.

432F

FAP432F.

433F

FAP433F.

231F

FAP231F.

234F

FAP234F.

23JF

FAP23JF.

U421E

FAPU421EV.

U422EV

FAPU422EV.

U423E

FAPU423EV.

U221EV

FAPU221EV.

U223EV

FAPU223EV.

U24JEV

FAPU24JEV.

U321EV

FAPU321EV.

U323EV

FAPU323EV.

U431F

FAPU431F.

U433F

FAPU433F.

mode

Configure operation mode of 5G radios .

option

-

Option

Description

single-5G

Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.

dual-5G

Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.

ddscan

Enable/disable use of one radio for dedicated dual-band scanning to detect RF characterization and wireless threat management.

option

-

Option

Description

enable

Enable dedicated dual-band scan mode.

disable

Disable dedicated dual-band scan mode.

config lan

Parameter

Description

Type

Size

port-mode

LAN port mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port-ssid

Bridge LAN port to SSID.

string

Maximum length: 15

port1-mode

LAN port 1 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port1-ssid

Bridge LAN port 1 to SSID.

string

Maximum length: 15

port2-mode

LAN port 2 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port2-ssid

Bridge LAN port 2 to SSID.

string

Maximum length: 15

port3-mode

LAN port 3 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port3-ssid

Bridge LAN port 3 to SSID.

string

Maximum length: 15

port4-mode

LAN port 4 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port4-ssid

Bridge LAN port 4 to SSID.

string

Maximum length: 15

port5-mode

LAN port 5 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port5-ssid

Bridge LAN port 5 to SSID.

string

Maximum length: 15

port6-mode

LAN port 6 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port6-ssid

Bridge LAN port 6 to SSID.

string

Maximum length: 15

port7-mode

LAN port 7 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port7-ssid

Bridge LAN port 7 to SSID.

string

Maximum length: 15

port8-mode

LAN port 8 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port8-ssid

Bridge LAN port 8 to SSID.

string

Maximum length: 15

config deny-mac-list

Parameter

Description

Type

Size

mac

A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP.

mac-address

Not Specified

config split-tunneling-acl

Parameter

Description

Type

Size

dest-ip

Destination IP and mask for the split-tunneling subnet.

ipv4-classnet

Not Specified

config radio-1

Parameter

Description

Type

Size

mode

Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 1 is disabled.

ap

Radio 1 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 1 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 1 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-2

Parameter

Description

Type

Size

mode

Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 2 is disabled.

ap

Radio 2 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 2 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 2 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-3

Parameter

Description

Type

Size

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 3 is disabled.

ap

Radio 3 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 3 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 3 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-4

Parameter

Description

Type

Size

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 3 is disabled.

ap

Radio 3 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 3 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 3 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config lbs

Parameter

Description

Type

Size

ekahau-blink-mode

Enable/disable Ekahau blink mode .

option

-

Option

Description

enable

Enable Ekahau blink mode.

disable

Disable Ekahau blink mode.

ekahau-tag

WiFi frame MAC address or WiFi Tag.

mac-address

Not Specified

erc-server-ip

IP address of Ekahau RTLS Controller (ERC).

ipv4-address-any

Not Specified

erc-server-port

Ekahau RTLS Controller (ERC) UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout

Enable/disable AeroScout Real Time Location Service .

option

-

Option

Description

enable

Enable AeroScout support.

disable

Disable AeroScout support.

aeroscout-server-ip

IP address of AeroScout server.

ipv4-address-any

Not Specified

aeroscout-server-port

AeroScout server UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout-mu

Enable/disable AeroScout Mobile Unit .

option

-

Option

Description

enable

Enable AeroScout MU mode support.

disable

Disable AeroScout MU mode support.

aeroscout-ap-mac

Use BSSID or board MAC address as AP MAC address in AeroScout AP messages .

option

-

Option

Description

bssid

Use BSSID as AP MAC address in AeroScout AP messages.

board-mac

Use board MAC address as AP MAC address in AeroScout AP messages.

aeroscout-mmu-report

Enable/disable compounded AeroScout tag and MU report .

option

-

Option

Description

enable

Enable compounded AeroScout tag and MU report.

disable

Disable compounded AeroScout tag and MU report.

aeroscout-mu-factor

AeroScout MU mode dilution factor .

integer

Minimum value: 0 Maximum value: 4294967295

aeroscout-mu-timeout

AeroScout MU mode timeout .

integer

Minimum value: 0 Maximum value: 65535

fortipresence

Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network .

option

-

Option

Description

foreign

FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.

both

Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.

disable

Disable FortiPresence.

fortipresence-server

FortiPresence server IP address.

ipv4-address-any

Not Specified

fortipresence-port

FortiPresence server UDP listening port .

integer

Minimum value: 300 Maximum value: 65535

fortipresence-secret

FortiPresence secret password (max. 16 characters).

password

Not Specified

fortipresence-project

FortiPresence project name .

string

Maximum length: 16

fortipresence-frequency

FortiPresence report transmit frequency .

integer

Minimum value: 5 Maximum value: 65535

fortipresence-rogue

Enable/disable FortiPresence finding and reporting rogue APs.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting rogue APs.

disable

Disable FortiPresence finding and reporting rogue APs.

fortipresence-unassoc

Enable/disable FortiPresence finding and reporting unassociated stations.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting unassociated stations.

disable

Disable FortiPresence finding and reporting unassociated stations.

fortipresence-ble

Enable/disable FortiPresence finding and reporting BLE devices.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting BLE devices.

disable

Disable FortiPresence finding and reporting BLE devices.

station-locate

Enable/disable client station locating services for all clients, whether associated or not .

option

-

Option

Description

enable

Enable station locating service.

disable

Disable station locating service.

config wireless-controller wtp-profile

Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

config wireless-controller wtp-profile

Description: Configure WTP profiles or FortiAP profiles that define radio settings for manageable FortiAP platforms.

edit <name>

set comment {var-string}

config platform

Description: WTP, FortiAP, or AP platform.

set type [AP-11N|220B|...]

set mode [single-5G|dual-5G]

set ddscan [enable|disable]

end

set control-message-offload {option1}, {option2}, ...

set ble-profile {string}

set wan-port-mode [wan-lan|wan-only]

config lan

Description: WTP LAN port mapping.

set port-mode [offline|nat-to-wan|...]

set port-ssid {string}

set port1-mode [offline|nat-to-wan|...]

set port1-ssid {string}

set port2-mode [offline|nat-to-wan|...]

set port2-ssid {string}

set port3-mode [offline|nat-to-wan|...]

set port3-ssid {string}

set port4-mode [offline|nat-to-wan|...]

set port4-ssid {string}

set port5-mode [offline|nat-to-wan|...]

set port5-ssid {string}

set port6-mode [offline|nat-to-wan|...]

set port6-ssid {string}

set port7-mode [offline|nat-to-wan|...]

set port7-ssid {string}

set port8-mode [offline|nat-to-wan|...]

set port8-ssid {string}

end

set energy-efficient-ethernet [enable|disable]

set led-state [enable|disable]

set led-schedules <name1>, <name2>, ...

set dtls-policy {option1}, {option2}, ...

set dtls-in-kernel [enable|disable]

set max-clients {integer}

set handoff-rssi {integer}

set handoff-sta-thresh {integer}

set handoff-roaming [enable|disable]

config deny-mac-list

Description: List of MAC addresses that are denied access to this WTP, FortiAP, or AP.

edit <id>

set mac {mac-address}

next

end

set ap-country [NA|AL|...]

set ip-fragment-preventing {option1}, {option2}, ...

set tun-mtu-uplink {integer}

set tun-mtu-downlink {integer}

set split-tunneling-acl-path [tunnel|local]

set split-tunneling-acl-local-ap-subnet [enable|disable]

config split-tunneling-acl

Description: Split tunneling ACL filter list.

edit <id>

set dest-ip {ipv4-classnet}

next

end

set allowaccess {option1}, {option2}, ...

set login-passwd-change [yes|default|...]

set login-passwd {password}

set lldp [enable|disable]

set poe-mode [auto|8023af|...]

config radio-1

Description: Configuration options for radio 1.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-2

Description: Configuration options for radio 2.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-3

Description: Configuration options for radio 3.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config radio-4

Description: Configuration options for radio 4.

set mode [disabled|ap|...]

set band [802.11a|802.11b|...]

set band-5g-type [5g-full|5g-high|...]

set airtime-fairness [enable|disable]

set protection-mode [rtscts|ctsonly|...]

set powersave-optimize {option1}, {option2}, ...

set transmit-optimize {option1}, {option2}, ...

set amsdu [enable|disable]

set coexistence [enable|disable]

set zero-wait-dfs [enable|disable]

set short-guard-interval [enable|disable]

set channel-bonding [160MHz|80MHz|...]

set auto-power-level [enable|disable]

set auto-power-high {integer}

set auto-power-low {integer}

set power-level {integer}

set dtim {integer}

set beacon-interval {integer}

set rts-threshold {integer}

set frag-threshold {integer}

set ap-sniffer-bufsize {integer}

set ap-sniffer-chan {integer}

set ap-sniffer-addr {mac-address}

set ap-sniffer-mgmt-beacon [enable|disable]

set ap-sniffer-mgmt-probe [enable|disable]

set ap-sniffer-mgmt-other [enable|disable]

set ap-sniffer-ctl [enable|disable]

set ap-sniffer-data [enable|disable]

set channel-utilization [enable|disable]

set spectrum-analysis [enable|disable]

set wids-profile {string}

set darrp [enable|disable]

set max-clients {integer}

set max-distance {integer}

set frequency-handoff [enable|disable]

set ap-handoff [enable|disable]

set vap-all [enable|disable]

set vaps <name1>, <name2>, ...

set channel <chan1>, <chan2>, ...

set call-admission-control [enable|disable]

set call-capacity {integer}

set bandwidth-admission-control [enable|disable]

set bandwidth-capacity {integer}

end

config lbs

Description: Set various location based service (LBS) options.

set ekahau-blink-mode [enable|disable]

set ekahau-tag {mac-address}

set erc-server-ip {ipv4-address-any}

set erc-server-port {integer}

set aeroscout [enable|disable]

set aeroscout-server-ip {ipv4-address-any}

set aeroscout-server-port {integer}

set aeroscout-mu [enable|disable]

set aeroscout-ap-mac [bssid|board-mac]

set aeroscout-mmu-report [enable|disable]

set aeroscout-mu-factor {integer}

set aeroscout-mu-timeout {integer}

set fortipresence [foreign|both|...]

set fortipresence-server {ipv4-address-any}

set fortipresence-port {integer}

set fortipresence-secret {password}

set fortipresence-project {string}

set fortipresence-frequency {integer}

set fortipresence-rogue [enable|disable]

set fortipresence-unassoc [enable|disable]

set fortipresence-ble [enable|disable]

set station-locate [enable|disable]

end

set ext-info-enable [enable|disable]

next

end

config wireless-controller wtp-profile

Parameter

Description

Type

Size

comment

Comment.

var-string

Maximum length: 255

control-message-offload

Enable/disable CAPWAP control message data channel offload.

option

-

Option

Description

ebp-frame

Ekahau blink protocol (EBP) frames.

aeroscout-tag

AeroScout tag.

ap-list

Rogue AP list.

sta-list

Rogue STA list.

sta-cap-list

STA capability list.

stats

WTP, radio, VAP, and STA statistics.

aeroscout-mu

AeroScout Mobile Unit (MU) report.

sta-health

STA health log.

ble-profile

Bluetooth Low Energy profile name.

string

Maximum length: 35

wan-port-mode

Enable/disable using a WAN port as a LAN port.

option

-

Option

Description

wan-lan

Enable using a WAN port as a LAN port.

wan-only

Disable using a WAN port as a LAN port.

energy-efficient-ethernet

Enable/disable use of energy efficient Ethernet on WTP.

option

-

Option

Description

enable

Enable use of energy efficient Ethernet on WTP.

disable

Disable use of energy efficient Ethernet on WTP.

led-state

Enable/disable use of LEDs on WTP .

option

-

Option

Description

enable

Enable use of LEDs on WTP.

disable

Disable use of LEDs on WTP.

led-schedules <name>

Recurring firewall schedules for illuminating LEDs on the FortiAP. If led-state is enabled, LEDs will be visible when at least one of the schedules is valid. Separate multiple schedule names with a space.

Schedule name.

string

Maximum length: 35

dtls-policy

WTP data channel DTLS policy .

option

-

Option

Description

clear-text

Clear Text Data Channel.

dtls-enabled

DTLS Enabled Data Channel.

ipsec-vpn

IPsec VPN Data Channel.

dtls-in-kernel

Enable/disable data channel DTLS in kernel.

option

-

Option

Description

enable

Enable data channel DTLS in kernel.

disable

Disable data channel DTLS in kernel.

max-clients

Maximum number of stations .

integer

Minimum value: 0 Maximum value: 4294967295

handoff-rssi

Minimum received signal strength indicator .

integer

Minimum value: 20 Maximum value: 30

handoff-sta-thresh

Threshold value for AP handoff.

integer

Minimum value: 0 Maximum value: 4294967295

handoff-roaming

Enable/disable client load balancing during roaming to avoid roaming delay .

option

-

Option

Description

enable

Enable handoff roaming.

disable

Disable handoff roaming.

ap-country

Country in which this WTP, FortiAP or AP will operate .

option

-

Option

Description

NA

NO_COUNTRY_SET

AL

ALBANIA

DZ

ALGERIA

AO

ANGOLA

AR

ARGENTINA

AM

ARMENIA

AU

AUSTRALIA

AT

AUSTRIA

AZ

AZERBAIJAN

BS

BAHAMAS

BH

BAHRAIN

BD

BANGLADESH

BB

BARBADOS

BY

BELARUS

BE

BELGIUM

BZ

BELIZE

BO

BOLIVIA

BA

BOSNIA AND HERZEGOVINA

BR

BRAZIL

BN

BRUNEI DARUSSALAM

BG

BULGARIA

KH

CAMBODIA

CF

CENTRAL AFRICA REPUBLIC

CL

CHILE

CN

CHINA

CO

COLOMBIA

CR

COSTA RICA

HR

CROATIA

CY

CYPRUS

CZ

CZECH REPUBLIC

DK

DENMARK

DO

DOMINICAN REPUBLIC

EC

ECUADOR

EG

EGYPT

SV

EL SALVADOR

EE

ESTONIA

FI

FINLAND

FR

FRANCE

GE

GEORGIA

DE

GERMANY

GR

GREECE

GL

GREENLAND

GD

GRENADA

GU

GUAM

GT

GUATEMALA

HT

HAITI

HN

HONDURAS

HK

HONG KONG

HU

HUNGARY

IS

ICELAND

IN

INDIA

ID

INDONESIA

IR

IRAN

IE

IRELAND

IL

ISRAEL

IT

ITALY

JM

JAMAICA

JO

JORDAN

KZ

KAZAKHSTAN

KE

KENYA

KP

NORTH KOREA

KR

KOREA REPUBLIC

KW

KUWAIT

LV

LATVIA

LB

LEBANON

LI

LIECHTENSTEIN

LT

LITHUANIA

LU

LUXEMBOURG

MO

MACAU SAR

MK

MACEDONIA, FYRO

MY

MALAYSIA

MT

MALTA

MX

MEXICO

MC

MONACO

MA

MOROCCO

MZ

MOZAMBIQUE

MM

MYANMAR

NP

NEPAL

NL

NETHERLANDS

AN

NETHERLANDS ANTILLES

AW

ARUBA

NZ

NEW ZEALAND

NO

NORWAY

OM

OMAN

PK

PAKISTAN

PA

PANAMA

PG

PAPUA NEW GUINEA

PY

PARAGUAY

PE

PERU

PH

PHILIPPINES

PL

POLAND

PT

PORTUGAL

PR

PUERTO RICO

QA

QATAR

RO

ROMANIA

RU

RUSSIA

RW

RWANDA

SA

SAUDI ARABIA

RS

REPUBLIC OF SERBIA

ME

MONTENEGRO

SG

SINGAPORE

SK

SLOVAKIA

SI

SLOVENIA

ZA

SOUTH AFRICA

ES

SPAIN

LK

SRI LANKA

SE

SWEDEN

SD

SUDAN

CH

SWITZERLAND

SY

SYRIAN ARAB REPUBLIC

TW

TAIWAN

TZ

TANZANIA

TH

THAILAND

TT

TRINIDAD AND TOBAGO

TN

TUNISIA

TR

TURKEY

AE

UNITED ARAB EMIRATES

UA

UKRAINE

GB

UNITED KINGDOM

US

UNITED STATES2

PS

UNITED STATES (PUBLIC SAFETY)

UY

URUGUAY

UZ

UZBEKISTAN

VE

VENEZUELA

VN

VIET NAM

YE

YEMEN

ZB

ZAMBIA

ZW

ZIMBABWE

JP

JAPAN14

CA

CANADA2

ip-fragment-preventing

Method.

option

-

Option

Description

tcp-mss-adjust

TCP maximum segment size adjustment.

icmp-unreachable

Drop packet and send ICMP Destination Unreachable

tun-mtu-uplink

The maximum transmission unit .

integer

Minimum value: 576 Maximum value: 1500

tun-mtu-downlink

The MTU of downlink CAPWAP tunnel .

integer

Minimum value: 576 Maximum value: 1500

split-tunneling-acl-path

Split tunneling ACL path is local/tunnel.

option

-

Option

Description

tunnel

Split tunneling ACL list traffic will be tunnel.

local

Split tunneling ACL list traffic will be local NATed.

split-tunneling-acl-local-ap-subnet

Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL .

option

-

Option

Description

enable

Enable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

disable

Disable automatically adding local subnetwork of FortiAP to split-tunneling ACL.

allowaccess

Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space.

option

-

Option

Description

https

HTTPS access.

ssh

SSH access.

snmp

SNMP access.

login-passwd-change

Change or reset the administrator password of a managed WTP, FortiAP or AP .

option

-

Option

Description

yes

Change the managed WTP, FortiAP or AP's administrator password. Use the login-password option to set the password.

default

Keep the managed WTP, FortiAP or AP's administrator password set to the factory default.

no

Do not change the managed WTP, FortiAP or AP's administrator password.

login-passwd

Set the managed WTP, FortiAP, or AP's administrator password.

password

Not Specified

lldp

Enable/disable Link Layer Discovery Protocol .

option

-

Option

Description

enable

Enable LLDP.

disable

Disable LLDP.

poe-mode

Set the WTP, FortiAP, or AP's PoE mode.

option

-

Option

Description

auto

Automatically detect the PoE mode.

8023af

Use 802.3af PoE mode.

8023at

Use 802.3at PoE mode.

power-adapter

Use the power adapter to control the PoE mode.

ext-info-enable

Enable/disable station/VAP/radio extension information.

option

-

Option

Description

enable

Enable station/VAP/radio extension information.

disable

Disable station/VAP/radio extension information.

config platform

Parameter

Description

Type

Size

type

WTP, FortiAP or AP platform type. There are built-in WTP profiles for all supported FortiAP models. You can select a built-in profile and customize it or create a new profile.

option

-

Option

Description

AP-11N

Default 11n AP.

220B

FAP220B/221B.

210B

FAP210B.

222B

FAP222B.

112B

FAP112B.

320B

FAP320B.

11C

FAP11C.

14C

FAP14C.

223B

FAP223B.

28C

FAP28C.

320C

FAP320C.

221C

FAP221C.

25D

FAP25D.

222C

FAP222C.

224D

FAP224D.

214B

FK214B.

21D

FAP21D.

24D

FAP24D.

112D

FAP112D.

223C

FAP223C.

321C

FAP321C.

C220C

FAPC220C.

C225C

FAPC225C.

C23JD

FAPC23JD.

C24JE

FAPC24JE.

S321C

FAPS321C.

S322C

FAPS322C.

S323C

FAPS323C.

S311C

FAPS311C.

S313C

FAPS313C.

S321CR

FAPS321CR.

S322CR

FAPS322CR.

S323CR

FAPS323CR.

S421E

FAPS421E.

S422E

FAPS422E.

S423E

FAPS423E.

421E

FAP421E.

423E

FAP423E.

221E

FAP221E.

222E

FAP222E.

223E

FAP223E.

224E

FAP224E.

231E

FAP231E.

S221E

FAPS221E.

S223E

FAPS223E.

321E

FAP321E.

431F

FAP431F.

432F

FAP432F.

433F

FAP433F.

231F

FAP231F.

234F

FAP234F.

23JF

FAP23JF.

U421E

FAPU421EV.

U422EV

FAPU422EV.

U423E

FAPU423EV.

U221EV

FAPU221EV.

U223EV

FAPU223EV.

U24JEV

FAPU24JEV.

U321EV

FAPU321EV.

U323EV

FAPU323EV.

U431F

FAPU431F.

U433F

FAPU433F.

mode

Configure operation mode of 5G radios .

option

-

Option

Description

single-5G

Configure radios as one 5GHz band, one 2.4GHz band, and one dedicated monitor or sniffer.

dual-5G

Configure radios as one lower 5GHz band, one higher 5GHz band and one 2.4GHz band respectively.

ddscan

Enable/disable use of one radio for dedicated dual-band scanning to detect RF characterization and wireless threat management.

option

-

Option

Description

enable

Enable dedicated dual-band scan mode.

disable

Disable dedicated dual-band scan mode.

config lan

Parameter

Description

Type

Size

port-mode

LAN port mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port-ssid

Bridge LAN port to SSID.

string

Maximum length: 15

port1-mode

LAN port 1 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port1-ssid

Bridge LAN port 1 to SSID.

string

Maximum length: 15

port2-mode

LAN port 2 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port2-ssid

Bridge LAN port 2 to SSID.

string

Maximum length: 15

port3-mode

LAN port 3 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port3-ssid

Bridge LAN port 3 to SSID.

string

Maximum length: 15

port4-mode

LAN port 4 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port4-ssid

Bridge LAN port 4 to SSID.

string

Maximum length: 15

port5-mode

LAN port 5 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port5-ssid

Bridge LAN port 5 to SSID.

string

Maximum length: 15

port6-mode

LAN port 6 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port6-ssid

Bridge LAN port 6 to SSID.

string

Maximum length: 15

port7-mode

LAN port 7 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port7-ssid

Bridge LAN port 7 to SSID.

string

Maximum length: 15

port8-mode

LAN port 8 mode.

option

-

Option

Description

offline

Offline.

nat-to-wan

NAT WTP LAN port to WTP WAN port.

bridge-to-wan

Bridge WTP LAN port to WTP WAN port.

bridge-to-ssid

Bridge WTP LAN port to SSID.

port8-ssid

Bridge LAN port 8 to SSID.

string

Maximum length: 15

config deny-mac-list

Parameter

Description

Type

Size

mac

A WiFi device with this MAC address is denied access to this WTP, FortiAP or AP.

mac-address

Not Specified

config split-tunneling-acl

Parameter

Description

Type

Size

dest-ip

Destination IP and mask for the split-tunneling subnet.

ipv4-classnet

Not Specified

config radio-1

Parameter

Description

Type

Size

mode

Mode of radio 1. Radio 1 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 1 is disabled.

ap

Radio 1 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 1 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 1 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 1 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-2

Parameter

Description

Type

Size

mode

Mode of radio 2. Radio 2 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 2 is disabled.

ap

Radio 2 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 2 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 2 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 2 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-3

Parameter

Description

Type

Size

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 3 is disabled.

ap

Radio 3 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 3 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 3 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config radio-4

Parameter

Description

Type

Size

mode

Mode of radio 3. Radio 3 can be disabled, configured as an access point, a rogue AP monitor, or a sniffer.

option

-

Option

Description

disabled

Radio 3 is disabled.

ap

Radio 3 operates as an access point that allows WiFi clients to connect to your network.

monitor

Radio 3 operates as a dedicated monitor. As a monitor, the radio scans for other WiFi access points and adds them to the Rogue AP monitor list.

sniffer

Radio 3 operates as a sniffer capturing WiFi frames on air.

band

WiFi band that Radio 3 operates on.

option

-

Option

Description

802.11a

802.11a.

802.11b

802.11b.

802.11g

802.11g/b.

802.11n

802.11n/g/b at 2.4GHz.

802.11n-5G

802.11n/a at 5GHz.

802.11ac

802.11ac/n/a.

802.11ax-5G

802.11ax/ac/n/a at 5GHz.

802.11ax

802.11ax/n/g/b at 2.4GHz.

802.11n,g-only

802.11n/g at 2.4GHz.

802.11g-only

802.11g.

802.11n-only

802.11n at 2.4GHz.

802.11n-5G-only

802.11n at 5GHz.

802.11ac,n-only

802.11ac/n.

802.11ac-only

802.11ac.

802.11ax,ac-only

802.11ax/ac at 5GHz.

802.11ax,ac,n-only

802.11ax/ac/n at 5GHz.

802.11ax-5G-only

802.11ax at 5GHz.

802.11ax,n-only

802.11ax/n at 2.4GHz.

802.11ax,n,g-only

802.11ax/n/g at 2.4GHz.

802.11ax-only

802.11ax at 2.4GHz.

band-5g-type

WiFi 5G band type.

option

-

Option

Description

5g-full

Full 5G band.

5g-high

High 5G band.

5g-low

Low 5G band.

airtime-fairness

Enable/disable airtime fairness .

option

-

Option

Description

enable

Enable airtime fairness (ATF) support.

disable

Disable airtime fairness (ATF) support.

protection-mode

Enable/disable 802.11g protection modes to support backwards compatibility with older clients (rtscts, ctsonly, disable).

option

-

Option

Description

rtscts

Enable 802.11g protection RTS/CTS mode.

ctsonly

Enable 802.11g protection CTS only mode.

disable

Disable 802.11g protection mode.

powersave-optimize

Enable client power-saving features such as TIM, AC VO, and OBSS etc.

option

-

Option

Description

tim

TIM bit for client in power save mode.

ac-vo

Use AC VO priority to send out packets in the power save queue.

no-obss-scan

Do not put OBSS scan IE into beacon and probe response frames.

no-11b-rate

Do not send frame using 11b data rate.

client-rate-follow

Adapt transmitting PHY rate with receiving PHY rate from a client.

transmit-optimize

Packet transmission optimization options including power saving, aggregation limiting, retry limiting, etc. All are enabled by default.

option

-

Option

Description

disable

Disable packet transmission optimization.

power-save

Tag client as operating in power save mode if excessive transmit retries occur.

aggr-limit

Set aggregation limit to a lower value when data rate is low.

retry-limit

Set software retry limit to a lower value when data rate is low.

send-bar

Limit transmission of BAR frames.

amsdu

Enable/disable 802.11n AMSDU support. AMSDU can improve performance if supported by your WiFi clients .

option

-

Option

Description

enable

Enable AMSDU support.

disable

Disable AMSDU support.

coexistence

Enable/disable allowing both HT20 and HT40 on the same radio .

option

-

Option

Description

enable

Enable support for both HT20 and HT40 on the same radio.

disable

Disable support for both HT20 and HT40 on the same radio.

zero-wait-dfs

Enable/disable zero wait DFS on radio .

option

-

Option

Description

enable

Enable zero wait DFS

disable

Disable zero wait DFS

short-guard-interval

Use either the short guard interval (Short GI) of 400 ns or the long guard interval (Long GI) of 800 ns.

option

-

Option

Description

enable

Select the 400 ns short guard interval (Short GI).

disable

Select the 800 ns long guard interval (Long GI).

channel-bonding

Channel bandwidth: 160,80, 40, or 20MHz. Channels may use both 20 and 40 by enabling coexistence.

option

-

Option

Description

160MHz

160 MHz channel width.

80MHz

80 MHz channel width.

40MHz

40 MHz channel width.

20MHz

20 MHz channel width.

auto-power-level

Enable/disable automatic power-level adjustment to prevent co-channel interference .

option

-

Option

Description

enable

Enable automatic transmit power adjustment.

disable

Disable automatic transmit power adjustment.

auto-power-high

The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

auto-power-low

The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type).

integer

Minimum value: 0 Maximum value: 4294967295

power-level

Radio power level as a percentage of the maximum transmit power .

integer

Minimum value: 0 Maximum value: 100

dtim

Delivery Traffic Indication Map . Set higher to save battery life of WiFi client in power-save mode.

integer

Minimum value: 1 Maximum value: 255

beacon-interval

Beacon interval. The time between beacon frames in msec .

integer

Minimum value: 0 Maximum value: 65535

rts-threshold

Maximum packet size for RTS transmissions, specifying the maximum size of a data packet before RTS/CTS .

integer

Minimum value: 256 Maximum value: 2346

frag-threshold

Maximum packet size that can be sent without fragmentation .

integer

Minimum value: 800 Maximum value: 2346

ap-sniffer-bufsize

Sniffer buffer size .

integer

Minimum value: 1 Maximum value: 32

ap-sniffer-chan

Channel on which to operate the sniffer .

integer

Minimum value: 0 Maximum value: 4294967295

ap-sniffer-addr

MAC address to monitor.

mac-address

Not Specified

ap-sniffer-mgmt-beacon

Enable/disable sniffer on WiFi management Beacon frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management beacon frame.

disable

Disable sniffer on WiFi management beacon frame.

ap-sniffer-mgmt-probe

Enable/disable sniffer on WiFi management probe frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management probe frame.

disable

Enable sniffer on WiFi management probe frame.

ap-sniffer-mgmt-other

Enable/disable sniffer on WiFi management other frames .

option

-

Option

Description

enable

Enable sniffer on WiFi management other frame.

disable

Disable sniffer on WiFi management other frame.

ap-sniffer-ctl

Enable/disable sniffer on WiFi control frame .

option

-

Option

Description

enable

Enable sniffer on WiFi control frame.

disable

Disable sniffer on WiFi control frame.

ap-sniffer-data

Enable/disable sniffer on WiFi data frame .

option

-

Option

Description

enable

Enable sniffer on WiFi data frame

disable

Disable sniffer on WiFi data frame

channel-utilization

Enable/disable measuring channel utilization.

option

-

Option

Description

enable

Enable measuring channel utilization.

disable

Disable measuring channel utilization.

spectrum-analysis

Enable/disable spectrum analysis to find interference that would negatively impact wireless performance.

option

-

Option

Description

enable

Enable spectrum analysis.

disable

Disable spectrum analysis.

wids-profile

Wireless Intrusion Detection System (WIDS) profile name to assign to the radio.

string

Maximum length: 35

darrp

Enable/disable Distributed Automatic Radio Resource Provisioning .

option

-

Option

Description

enable

Enable distributed automatic radio resource provisioning.

disable

Disable distributed automatic radio resource provisioning.

max-clients

Maximum number of stations (STAs) or WiFi clients supported by the radio. Range depends on the hardware.

integer

Minimum value: 0 Maximum value: 4294967295

max-distance

Maximum expected distance between the AP and clients .

integer

Minimum value: 0 Maximum value: 54000

frequency-handoff

Enable/disable frequency handoff of clients to other channels .

option

-

Option

Description

enable

Enable frequency handoff.

disable

Disable frequency handoff.

ap-handoff

Enable/disable AP handoff of clients to other APs .

option

-

Option

Description

enable

Enable AP handoff.

disable

Disable AP handoff.

vap-all

Enable/disable the automatic inheritance of all Virtual Access Points .

option

-

Option

Description

enable

Automatically select tunnel VAPs.

disable

Manually select VAPs.

vaps <name>

Manually selected list of Virtual Access Points (VAPs).

Virtual Access Point (VAP) name.

string

Maximum length: 35

channel <chan>

Selected list of wireless radio channels.

Channel number.

string

Maximum length: 3

call-admission-control

Enable/disable WiFi multimedia (WMM) call admission control to optimize WiFi bandwidth use for VoIP calls. New VoIP calls are only accepted if there is enough bandwidth available to support them.

option

-

Option

Description

enable

Enable WMM call admission control.

disable

Disable WMM call admission control.

call-capacity

Maximum number of Voice over WLAN .

integer

Minimum value: 0 Maximum value: 60

bandwidth-admission-control

Enable/disable WiFi multimedia (WMM) bandwidth admission control to optimize WiFi bandwidth use. A request to join the wireless network is only allowed if the access point has enough bandwidth to support it.

option

-

Option

Description

enable

Enable WMM bandwidth admission control.

disable

Disable WMM bandwidth admission control.

bandwidth-capacity

Maximum bandwidth capacity allowed .

integer

Minimum value: 1 Maximum value: 600000

config lbs

Parameter

Description

Type

Size

ekahau-blink-mode

Enable/disable Ekahau blink mode .

option

-

Option

Description

enable

Enable Ekahau blink mode.

disable

Disable Ekahau blink mode.

ekahau-tag

WiFi frame MAC address or WiFi Tag.

mac-address

Not Specified

erc-server-ip

IP address of Ekahau RTLS Controller (ERC).

ipv4-address-any

Not Specified

erc-server-port

Ekahau RTLS Controller (ERC) UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout

Enable/disable AeroScout Real Time Location Service .

option

-

Option

Description

enable

Enable AeroScout support.

disable

Disable AeroScout support.

aeroscout-server-ip

IP address of AeroScout server.

ipv4-address-any

Not Specified

aeroscout-server-port

AeroScout server UDP listening port.

integer

Minimum value: 1024 Maximum value: 65535

aeroscout-mu

Enable/disable AeroScout Mobile Unit .

option

-

Option

Description

enable

Enable AeroScout MU mode support.

disable

Disable AeroScout MU mode support.

aeroscout-ap-mac

Use BSSID or board MAC address as AP MAC address in AeroScout AP messages .

option

-

Option

Description

bssid

Use BSSID as AP MAC address in AeroScout AP messages.

board-mac

Use board MAC address as AP MAC address in AeroScout AP messages.

aeroscout-mmu-report

Enable/disable compounded AeroScout tag and MU report .

option

-

Option

Description

enable

Enable compounded AeroScout tag and MU report.

disable

Disable compounded AeroScout tag and MU report.

aeroscout-mu-factor

AeroScout MU mode dilution factor .

integer

Minimum value: 0 Maximum value: 4294967295

aeroscout-mu-timeout

AeroScout MU mode timeout .

integer

Minimum value: 0 Maximum value: 65535

fortipresence

Enable/disable FortiPresence to monitor the location and activity of WiFi clients even if they don't connect to this WiFi network .

option

-

Option

Description

foreign

FortiPresence monitors foreign channels only. Foreign channels mean all other available channels than the current operating channel of the WTP, AP, or FortiAP.

both

Enable FortiPresence on both foreign and home channels. Select this option to have FortiPresence monitor all WiFi channels.

disable

Disable FortiPresence.

fortipresence-server

FortiPresence server IP address.

ipv4-address-any

Not Specified

fortipresence-port

FortiPresence server UDP listening port .

integer

Minimum value: 300 Maximum value: 65535

fortipresence-secret

FortiPresence secret password (max. 16 characters).

password

Not Specified

fortipresence-project

FortiPresence project name .

string

Maximum length: 16

fortipresence-frequency

FortiPresence report transmit frequency .

integer

Minimum value: 5 Maximum value: 65535

fortipresence-rogue

Enable/disable FortiPresence finding and reporting rogue APs.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting rogue APs.

disable

Disable FortiPresence finding and reporting rogue APs.

fortipresence-unassoc

Enable/disable FortiPresence finding and reporting unassociated stations.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting unassociated stations.

disable

Disable FortiPresence finding and reporting unassociated stations.

fortipresence-ble

Enable/disable FortiPresence finding and reporting BLE devices.

option

-

Option

Description

enable

Enable FortiPresence finding and reporting BLE devices.

disable

Disable FortiPresence finding and reporting BLE devices.

station-locate

Enable/disable client station locating services for all clients, whether associated or not .

option

-

Option

Description

enable

Enable station locating service.

disable

Disable station locating service.