Hyperscale firewall SNMP MIB and trap fields
IP pool MIB and trap fields
You can use the following MIB fields to get hyperscale firewall IP pool information:
FgFwIppStatsEntry ::= SEQUENCE { ... fgFwIppStatsFlags DisplayString, fgFwIppStatsGroupName DisplayString, fgFwIppStatsBlockSize Gauge32, fgFwIppStatsPortStart InetPortNumber, fgFwIppStatsPortEnd InetPortNumber, fgFwIppStatsStartClientIP IpAddress, fgFwIppStatsEndClientIP IpAddress, fgFwIppStatsRscTCP Gauge32, fgFwIppStatsRscUDP Gauge32, fgFwIppStatsUsedRscTCP Gauge32, fgFwIppStatsUsedRscUDP Gauge32, fgFwIppStatsPercentageTCP Gauge32, fgFwIppStatsPercentageUDP Gauge32 }
The following SNMP trap is also available for IP pool utilization:
fgTrapPoolUsage NOTIFICATION-TYPE OBJECTS { fnSysSerial, sysName, fgFwIppTrapType, fgFwIppStatsName, fgFwIppStatsGroupName, fgFwTrapPoolUtilization, fgFwIppTrapPoolProto } STATUS current DESCRIPTION "A trap for ippool." ::= { fgTrapPrefix 1401 }
Hyperscale firewall policy MIB fields
You can use the following MIB fields to send SNMP queries for hyperscale firewall policy information. These MIB fields support IPv4 and IPv6 hyperscale firewall policies and are available from the latest FORTINET-FORTIGATE-MIB.mib.
Path: FORTINET-FORTIGATE-MIB:fortinet.fnFortiGateMib.fgFirewall.fgFwPolicies.fgFwPolTables
OID: 1.3.6.1.4.1.12356.101.5.1.2
Index |
MIB field |
Description |
---|---|---|
.3 |
fgFwHsPolStatsTable |
IPv4 hyperscale firewall policy statistics table. |
.3.1 |
fgFwHsPolStatsEntry |
IPv4 hyperscale firewall policy statistics entry. |
.3.1.1 |
fgFwHsPolID |
IPv4 hyperscale firewall policy ID. |
.3.1.2 |
fgFwHsPolPktCount |
IPv4 hyperscale firewall policy packet count. |
.3.1.3 |
fgFwHsPolByteCount |
IPv4 hyperscale firewall policy byte count. |
.3.1.4 |
fgFwHsPolLastUsed |
The last date and time the Ipv4 hyperscale firewall policy was used to start a session. |
.4 |
fgFwHsPol6StatsTable |
IPv6 hyperscale firewall policy stats table. |
.4.1 |
fgFwHsPol6StatsEntry |
IPv6 hyperscale firewall policy statistics entry. |
.4.1.1 |
fgFwHsPol6ID |
IPv6 hyperscale firewall statisticsID. |
.4.1.2 |
fgFwHsPol6PktCount |
IPv6 hyperscale firewall policy packet count. |
.4.1.3 |
fgFwHsPol6ByteCount |
IPv6 hyperscale firewall policy byte count. |
.4.1.4 |
fgFwHsPol6LastUsed |
The last date and time the IPv6 hyperscale firewall policy was used to start a session. |
Queries of these fields follow the convention .oid.<vdom-id>.<policy-id>
Example SNMP query for IPv4 hyperscale firewall policy statistics:
$ snmpwalk -v2c -c public <ip-address> 1.3.6.1.4.1.12356.101.5.1.2.3.1
Example SNMP query for IPv6 hyperscale firewall policy statistics:
$ snmpwalk -v2c -c public <ip-address> 1.3.6.1.4.1.12356.101.5.1.2.4.1