config wireless-controller wtp
Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
config wireless-controller wtp
Description: Configure Wireless Termination Points (WTPs), that is, FortiAPs or APs to be managed by FortiGate.
edit <wtp-id>
set admin [discovered|disable|...]
set allowaccess {option1}, {option2}, ...
set bonjour-profile {string}
set coordinate-latitude {string}
set coordinate-longitude {string}
set image-download [enable|disable]
set index {integer}
set ip-fragment-preventing {option1}, {option2}, ...
config lan
Description: WTP LAN port mapping.
set port-mode [offline|nat-to-wan|...]
set port-ssid {string}
set port1-mode [offline|nat-to-wan|...]
set port1-ssid {string}
set port2-mode [offline|nat-to-wan|...]
set port2-ssid {string}
set port3-mode [offline|nat-to-wan|...]
set port3-ssid {string}
set port4-mode [offline|nat-to-wan|...]
set port4-ssid {string}
set port5-mode [offline|nat-to-wan|...]
set port5-ssid {string}
set port6-mode [offline|nat-to-wan|...]
set port6-ssid {string}
set port7-mode [offline|nat-to-wan|...]
set port7-ssid {string}
set port8-mode [offline|nat-to-wan|...]
set port8-ssid {string}
end
set led-state [enable|disable]
set location {string}
set login-passwd {password}
set login-passwd-change [yes|default|...]
set mesh-bridge-enable [default|enable|...]
set name {string}
set override-allowaccess [enable|disable]
set override-ip-fragment [enable|disable]
set override-lan [enable|disable]
set override-led-state [enable|disable]
set override-login-passwd-change [enable|disable]
set override-split-tunnel [enable|disable]
set override-wan-port-mode [enable|disable]
config radio-1
Description: Configuration options for radio 1.
set auto-power-high {integer}
set auto-power-level [enable|disable]
set auto-power-low {integer}
set band [802.11a|802.11b|...]
set channel <chan1>, <chan2>, ...
set override-analysis [enable|disable]
set override-band [enable|disable]
set override-channel [enable|disable]
set override-txpower [enable|disable]
set override-vaps [enable|disable]
set power-level {integer}
set spectrum-analysis [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
end
config radio-2
Description: Configuration options for radio 2.
set auto-power-high {integer}
set auto-power-level [enable|disable]
set auto-power-low {integer}
set band [802.11a|802.11b|...]
set channel <chan1>, <chan2>, ...
set override-analysis [enable|disable]
set override-band [enable|disable]
set override-channel [enable|disable]
set override-txpower [enable|disable]
set override-vaps [enable|disable]
set power-level {integer}
set spectrum-analysis [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
end
config radio-3
Description: Configuration options for radio 3.
set auto-power-high {integer}
set auto-power-level [enable|disable]
set auto-power-low {integer}
set band [802.11a|802.11b|...]
set channel <chan1>, <chan2>, ...
set override-analysis [enable|disable]
set override-band [enable|disable]
set override-channel [enable|disable]
set override-txpower [enable|disable]
set override-vaps [enable|disable]
set power-level {integer}
set spectrum-analysis [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
end
config radio-4
Description: Configuration options for radio 4.
set auto-power-high {integer}
set auto-power-level [enable|disable]
set auto-power-low {integer}
set band [802.11a|802.11b|...]
set channel <chan1>, <chan2>, ...
set override-analysis [enable|disable]
set override-band [enable|disable]
set override-channel [enable|disable]
set override-txpower [enable|disable]
set override-vaps [enable|disable]
set power-level {integer}
set spectrum-analysis [enable|disable]
set vap-all [enable|disable]
set vaps <name1>, <name2>, ...
end
set region {string}
set region-x {string}
set region-y {string}
config split-tunneling-acl
Description: Split tunneling ACL filter list.
edit <id>
set dest-ip {ipv4-classnet}
next
end
set split-tunneling-acl-local-ap-subnet [enable|disable]
set split-tunneling-acl-path [tunnel|local]
set tun-mtu-downlink {integer}
set tun-mtu-uplink {integer}
set wan-port-mode [wan-lan|wan-only]
set wtp-mode [normal|remote]
set wtp-profile {string}
next
end
config wireless-controller wtp
|
Parameter |
Description |
Type |
Size |
|||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
admin |
Configure how the FortiGate operating as a wireless controller discovers and manages this WTP, AP or FortiAP. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
allowaccess |
Control management access to the managed WTP, FortiAP, or AP. Separate entries with a space. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
bonjour-profile |
Bonjour profile name. |
string |
Maximum length: 35 |
|||||||||
|
coordinate-latitude |
WTP latitude coordinate. |
string |
Maximum length: 19 |
|||||||||
|
coordinate-longitude |
WTP longitude coordinate. |
string |
Maximum length: 19 |
|||||||||
|
image-download |
Enable/disable WTP image download. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
index |
Index (0 - 4294967295). Read-only. |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||
|
ip-fragment-preventing |
Method(s) by which IP fragmentation is prevented for control and data packets through CAPWAP tunnel (default = tcp-mss-adjust). |
option |
- |
|||||||||
|
|
|
|||||||||||
|
led-state |
Enable to allow the FortiAPs LEDs to light. Disable to keep the LEDs off. You may want to keep the LEDs off so they are not distracting in low light areas etc. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
location |
Field for describing the physical location of the WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|||||||||
|
login-passwd |
Set the managed WTP, FortiAP, or AP's administrator password. |
password |
Not Specified |
|||||||||
|
login-passwd-change |
Change or reset the administrator password of a managed WTP, FortiAP or AP (yes, default, or no, default = no). |
option |
- |
|||||||||
|
|
|
|||||||||||
|
mesh-bridge-enable |
Enable/disable mesh Ethernet bridge when WTP is configured as a mesh branch/leaf AP. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
name |
WTP, AP or FortiAP configuration name. |
string |
Maximum length: 35 |
|||||||||
|
override-allowaccess |
Enable to override the WTP profile management access configuration. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-ip-fragment |
Enable/disable overriding the WTP profile IP fragment prevention setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-lan |
Enable to override the WTP profile LAN port setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-led-state |
Enable to override the profile LED state setting for this FortiAP. You must enable this option to use the led-state command to turn off the FortiAP's LEDs. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-login-passwd-change |
Enable to override the WTP profile login-password (administrator password) setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-split-tunnel |
Enable/disable overriding the WTP profile split tunneling setting. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
override-wan-port-mode |
Enable/disable overriding the wan-port-mode in the WTP profile. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
region |
Region name WTP is associated with. |
string |
Maximum length: 35 |
|||||||||
|
region-x |
Relative horizontal region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
|||||||||
|
region-y |
Relative vertical region coordinate (between 0 and 1). |
string |
Maximum length: 15 |
|||||||||
|
split-tunneling-acl-local-ap-subnet |
Enable/disable automatically adding local subnetwork of FortiAP to split-tunneling ACL (default = disable). |
option |
- |
|||||||||
|
|
|
|||||||||||
|
split-tunneling-acl-path |
Split tunneling ACL path is local/tunnel. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
tun-mtu-downlink |
The MTU of downlink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). |
integer |
Minimum value: 576 Maximum value: 1500 |
|||||||||
|
tun-mtu-uplink |
The maximum transmission unit (MTU) of uplink CAPWAP tunnel (576 - 1500 bytes or 0; 0 means the local MTU of FortiAP; default = 0). |
integer |
Minimum value: 576 Maximum value: 1500 |
|||||||||
|
wan-port-mode |
Enable/disable using the FortiAP WAN port as a LAN port. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
wtp-id |
WTP ID. |
string |
Maximum length: 35 |
|||||||||
|
wtp-mode |
WTP, AP, or FortiAP operating mode; normal (by default) or remote. A tunnel mode SSID can be assigned to an AP in normal mode but not remote mode, while a local-bridge mode SSID can be assigned to an AP in either normal mode or remote mode. |
option |
- |
|||||||||
|
|
|
|||||||||||
|
wtp-profile |
WTP profile name to apply to this WTP, AP or FortiAP. |
string |
Maximum length: 35 |
|||||||||
config lan
|
Parameter |
Description |
Type |
Size |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
port-mode |
LAN port mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port-ssid |
Bridge LAN port to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port1-mode |
LAN port 1 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port1-ssid |
Bridge LAN port 1 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port2-mode |
LAN port 2 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port2-ssid |
Bridge LAN port 2 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port3-mode |
LAN port 3 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port3-ssid |
Bridge LAN port 3 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port4-mode |
LAN port 4 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port4-ssid |
Bridge LAN port 4 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port5-mode |
LAN port 5 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port5-ssid |
Bridge LAN port 5 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port6-mode |
LAN port 6 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port6-ssid |
Bridge LAN port 6 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port7-mode |
LAN port 7 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port7-ssid |
Bridge LAN port 7 to SSID. |
string |
Maximum length: 15 |
|||||||||||
|
port8-mode |
LAN port 8 mode. |
option |
- |
|||||||||||
|
|
|
|||||||||||||
|
port8-ssid |
Bridge LAN port 8 to SSID. |
string |
Maximum length: 15 |
|||||||||||
config radio-1
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 1 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-2
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 2 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-3
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 3 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
config radio-4
|
Parameter |
Description |
Type |
Size |
|||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
auto-power-high |
The upper bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
auto-power-level |
Enable/disable automatic power-level adjustment to prevent co-channel interference (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
auto-power-low |
The lower bound of automatic transmit power adjustment in dBm (the actual range of transmit power depends on the AP platform type). |
integer |
Minimum value: 0 Maximum value: 4294967295 |
|||||||||||||||||||||||||||||||||||||||||||
|
band |
WiFi band that Radio 4 operates on. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
channel |
Selected list of wireless radio channels. Channel number. |
string |
Maximum length: 3 |
|||||||||||||||||||||||||||||||||||||||||||
|
override-analysis |
Enable to override the WTP profile spectrum analysis configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-band |
Enable to override the WTP profile band setting. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-channel |
Enable to override WTP profile channel settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-txpower |
Enable to override the WTP profile power level configuration. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
override-vaps |
Enable to override WTP profile Virtual Access Point (VAP) settings. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
power-level |
Radio power level as a percentage of the maximum transmit power (0 - 100, default = 100). |
integer |
Minimum value: 0 Maximum value: 100 |
|||||||||||||||||||||||||||||||||||||||||||
|
spectrum-analysis |
Enable/disable spectrum analysis to find interference that would negatively impact wireless performance. |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vap-all |
Enable/disable the automatic inheritance of all Virtual Access Points (VAPs) (default = enable). |
option |
- |
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
vaps |
Manually selected list of Virtual Access Points (VAPs). Virtual Access Point (VAP) name. |
string |
Maximum length: 35 |
|||||||||||||||||||||||||||||||||||||||||||
config split-tunneling-acl
|
Parameter |
Description |
Type |
Size |
|---|---|---|---|
|
dest-ip |
Destination IP and mask for the split-tunneling subnet. |
ipv4-classnet |
Not Specified |
|
id |
ID. |
integer |
Minimum value: 0 Maximum value: 4294967295 |