config wireless-controller wag-profile

Configure wireless access gateway (WAG) profiles used for tunnels on AP.

config wireless-controller wag-profile
    Description: Configure wireless access gateway (WAG) profiles used for tunnels on AP.
    edit <name>
        set comment {var-string}
        set dhcp-ip-addr {ipv4-address}
        set ping-interval {integer}
        set ping-number {integer}
        set return-packet-timeout {integer}
        set tunnel-type [l2tpv3|gre]
        set wag-ip {ipv4-address}
        set wag-port {integer}
    next
end

config wireless-controller wag-profile

Parameter	Description	Type	Size
comment	Comment.	var-string	Maximum length: 255
dhcp-ip-addr	IP address of the monitoring DHCP request packet sent through the tunnel.	ipv4-address	Not Specified
name	Tunnel profile name.	string	Maximum length: 35
ping-interval	Interval between two tunnel monitoring echo packets (1 - 65535 sec, default = 1).	integer	Minimum value: 1 Maximum value: 65535
ping-number	Number of the tunnel monitoring echo packets (1 - 65535, default = 5).	integer	Minimum value: 1 Maximum value: 65535
return-packet-timeout	Window of time for the return packets from the tunnel's remote end (1 - 65535 sec, default = 160).	integer	Minimum value: 1 Maximum value: 65535
tunnel-type	Tunnel type.	option	-
	Option Description l2tpv3 L2TPv3 Ethernet Pseudowire. gre GRE Ethernet tunnel.
wag-ip	IP Address of the wireless access gateway.	ipv4-address	Not Specified
wag-port	UDP port of the wireless access gateway.	integer	Minimum value: 0 Maximum value: 65535