config monitoring npu-hpe
|
This command is available for model(s): FortiGate 1000D, FortiGate 1100E, FortiGate 1101E, FortiGate 1200D, FortiGate 1500DT, FortiGate 1500D, FortiGate 2000E, FortiGate 2200E, FortiGate 2201E, FortiGate 2500E, FortiGate 3000D, FortiGate 300D, FortiGate 300E, FortiGate 301E, FortiGate 3100D, FortiGate 3200D, FortiGate 3300E, FortiGate 3301E, FortiGate 3400E, FortiGate 3401E, FortiGate 3600E, FortiGate 3601E, FortiGate 3700D, FortiGate 3800D, FortiGate 3810D, FortiGate 3815D, FortiGate 3960E, FortiGate 3980E, FortiGate 400D, FortiGate 400E Bypass, FortiGate 400E, FortiGate 401E, FortiGate 5001D, FortiGate 5001E1, FortiGate 5001E, FortiGate 500D, FortiGate 500E, FortiGate 501E, FortiGate 600D, FortiGate 600E, FortiGate 601E, FortiGate 800D, FortiGate 900D. It is not available for: FortiGate 100EF, FortiGate 100E, FortiGate 100F, FortiGate 101E, FortiGate 101F, FortiGate 140D-POE, FortiGate 140D, FortiGate 140E-POE, FortiGate 140E, FortiGate 200E, FortiGate 201E, FortiGate 30E 3G4G GBL, FortiGate 30E 3G4G INTL, FortiGate 30E 3G4G NAM, FortiGate 30E, FortiGate 40F 3G4G, FortiGate 40F, FortiGate 50E, FortiGate 51E, FortiGate 52E, FortiGate 60E DSLJ, FortiGate 60E-POE, FortiGate 60E, FortiGate 60F, FortiGate 61E, FortiGate 61F, FortiGate 80E-POE, FortiGate 80E, FortiGate 80F Bypass, FortiGate 80F-POE, FortiGate 80F, FortiGate 81E-POE, FortiGate 81E, FortiGate 81F-POE, FortiGate 81F, FortiGate 90E, FortiGate 91E, FortiGate 92D, FortiGate VM64, FortiGateRugged 30D, FortiGateRugged 35D, FortiGateRugged 60F 3G4G, FortiGateRugged 60F, FortiGateRugged 90D, FortiWiFi 30E 3G4G INTL, FortiWiFi 30E 3G4G NAM, FortiWiFi 30E, FortiWiFi 40F 3G4G, FortiWiFi 40F, FortiWiFi 50E 2R, FortiWiFi 50E, FortiWiFi 51E, FortiWiFi 60E DSLJ, FortiWiFi 60E, FortiWiFi 60F, FortiWiFi 61E, FortiWiFi 61F, FortiWiFi 80F 2R, FortiWiFi 81F 2R-POE, FortiWiFi 81F 2R. |
Configure npu-hpe status monitoring.
config monitoring npu-hpe
Description: Configure npu-hpe status monitoring.
set interval {integer}
set multipliers {user}
set status [enable|disable]
end
config monitoring npu-hpe
|
Parameter |
Description |
Type |
Size |
|||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
interval |
HPE status check interval. |
integer |
Minimum value: 1 Maximum value: 60 |
|||||||
|
multipliers |
HPE type interval multipliers. An event log is generated after every (interval * multiplier)seconds as configured for any HPE type when drops occur for that HPE type. An attack log is generated after every (4 * multiplier) number of continuous event logs. |
user |
Not Specified |
|||||||
|
status |
Enable/disable HPE status monitoring. |
option |
- |
|||||||
|
|
|
|||||||||