config firewall multicast-policy6

Configure IPv6 multicast NAT policies.

config firewall multicast-policy6

Description: Configure IPv6 multicast NAT policies.

edit <id>

set status [enable|disable]

set logtraffic [enable|disable]

set srcintf {string}

set dstintf {string}

set srcaddr <name1>, <name2>, ...

set dstaddr <name1>, <name2>, ...

set action [accept|deny]

set protocol {integer}

set start-port {integer}

set end-port {integer}

set auto-asic-offload [enable|disable]

next

end

config firewall multicast-policy6

Parameter	Description	Type	Size
status	Enable/disable this policy.	option	-
	Option Description enable Enable this policy. disable Disable this policy.
logtraffic	Enable/disable logging traffic accepted by this policy.	option	-
	Option Description enable Enable logging traffic accepted by this policy. disable Disable logging traffic accepted by this policy.
srcintf	IPv6 source interface name.	string	Not Specified
dstintf	IPv6 destination interface name.	string	Not Specified
srcaddr <name>	IPv6 source address name. Address name.	string	Maximum length: 79
dstaddr <name>	IPv6 destination address name. Address name.	string	Maximum length: 79
action	Accept or deny traffic matching the policy.	option	-
	Option Description accept Accept. deny Deny.
protocol	Integer value for the protocol type as defined by IANA .	integer	Minimum value: 0 Maximum value: 255
start-port	Integer value for starting TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535
end-port	Integer value for ending TCP/UDP/SCTP destination port in range .	integer	Minimum value: 0 Maximum value: 65535
auto-asic-offload	Enable/disable offloading policy traffic for hardware acceleration.	option	-
	Option Description enable Enable offloading policy traffic for hardware acceleration. disable Disable offloading policy traffic for hardware acceleration.