Deployment overview

Microsoft Azure supports virtual WAN (vWAN), and partners with third-party solution providers, such as Fortinet, to deploy network virtual appliances (NVAs) to a vWAN hub.

This document provides a brief overview of Microsoft Azure vWAN and how you can use Fortinet FortiGate virtual machines as NVAs in a vWAN hub. It also describes how to deploy Microsoft Azure vWAN and FortiGate NVAs and use FortiManager to configure an SD-WAN hub and spoke overlay between the FortiGate NVAs and branch FortiGates. The FortiGate NVAs are the hub, and the branch FortiGate(s) are the spokes in the SD-WAN network.

About this guide

This guide provides the design and steps for deploying a specific architecture. Readers should first evaluate their environment to determine whether the architecture and design outlined in this guide suits them. It is advised to review the Reference Architecture Guide(s) if readers are still in the process of selecting the right architecture.

This guide presents one of many ways to deploy the solution. It may also omit specific steps where readers must make design decisions to further configure their devices. It is recommended that readers also review supplementary material found in product administration guides, example guides, cookbooks, release notes, and other documents where appropriate.

This guide is part of the 4-D documentation series.

About the 4-D documentation series

Fortinet secure SD-WAN documentation is categorized into four distinct documents: Define, Design, Deploy and Demo. Each document is designed for a specific purpose and builds on the other documents by providing you with a complete path from beginning to end.

The 4-D documentation series includes the following components:

Document type	Description
Define	Conceptual guide to introduce the reader to common SD-WAN use cases and the Fortinet Secure SD-WAN solution
Design	Reference architecture guide that provides an overview of the components and architectures to satisfy common uses
Deploy	Provide the step-by-step procedures for deploying the desired architecture
Demo	GitHub repository of the configuration and examples that documents provide

The secure SD-WAN 4-D documentation series is available on the Fortinet Document Library.

This document covers the step-by-step procedures required to create a new SD-WAN region with Microsoft Azure virtual wide area network (vWAN). The architecture, components, and technology referenced in this document are covered in the Cloud on-ramp section of the SD-WAN Architecture for Enterprise document.

For additional information and documentation about the topics covered in this document, see the Fortinet Document Library at https://docs.fortinet.com.

Intended audience

This guide is primarily created for a technical audience, including system architects and design engineers, who wants to deploy Microsoft Azure vWAN with Fortinet Secure SD-WAN in greenfield scenarios.

It is assumed that you have read the SD-WAN Architecture for Enterprise document and have identified the architecture that satisfies your use case and goals. This guide does not cover solution overviews and explanations of technologies and components.

For implementation, a working knowledge of FortiManager and FortiOS networking and policy configuration is ideal.

For comments and feedback about this document, visit Azure vWAN SD-WAN with Routing Intent on community.fortinet.com.