Enabling Azure routing policy
To enable Azure routing policy:
- On the Azure portal, go to VirtualWAN > Hub > Routing. The Routing options display.
- Click Routing Intent and Routing Policies, and set the following options:
- Select the next hop for private traffic or Internet-bound traffic.
Ensure that Private Traffic is set to the address space from the peered VNET from Peering a vNET to the virtual WAN hub.
This example shows forwarding all the required RFC 1918 Addresses Internal Traffic to the Network Virtual Appliance under Routing Intent and Routing Policies.
Ensure that you include the Address space from the peered VNET (see Peering a vNET to the virtual WAN hub) in Private Traffic.
- Click Save.