Split-Task VDOM mode

By default the FortiGate 7000F operates in Multi VDOM mode. Use the following steps to convert a FortiGate 7000F from Multi VDOM mode to Split-Task VDOM mode. Converting to Split-Task VDOM mode involves first disabling VDOMs and then enabling Split-Task VDOM mode.

1. If required, delete all VDOMs except for mgmt-vdom and root.

2. Log into the CLI and enter the following command to turn off VDOMs:

   config global

   config system global

   set vdom-mode no-vdom

   end

   You are logged out of the CLI.

3. Log into the CLI and switch to Split-Task VDOM mode:

   config system global

   set vdom-mode split-vdom

   end

   You are logged out of the CLI.

4. Log back into the CLI or GUI.

   The FortiGate 7000F will be operating in Split-Task VDOM mode and you can go to Security Fabric > Fabric Connectors to verify that Security Fabric Setup is enabled.