HA heartbeat VLAN double-tagging
FortiGate-7000E HA supports HA heartbeat double-tagging to be compatible with third-party switches that do not support Fortinet's proprietary triple tagging format. HA heartbeat double-tagging has the following format:
TPID 0x8100 VLAN <vlan-id> (by default 999) + TPID 0x8100 VLAN 10/30 + ethernet packet
You can use the following commands to set the HA VLAN tagging mode to double-tagging, customize the outer TPID, and set the VLAN IDs for M1 and M2. Both FortiGates in the cluster must have the same VLAN tagging configuration.
config system ha
set ha-port-dtag-mode double-tagging
set ha-port-outer-tpid {0x8100 | 0x88a8 | 0x9100}
set hbdev-vlan-id <vlan>
set hbdev-second-vlan-id <vlan>
set ha-eth-type <ethertype>
end
Where:
ha-port-dtag-mode is set to double-tagging and the FortiGate-7000E uses the double-tagging format.
ha-port-outer-tipd sets the outer TPID to be compatible with the switch. The default outer TPID of 0x8100 is compatible with most third-party switches.
hbdev-vlan-id sets the outer VLAN ID used by M1 interface heartbeat packets.
hbdev-second-vlan-id sets the outer VLAN ID used by M2 interface heartbeat packets. The M1 and M2 interfaces must have different outer VLAN IDs if they are connected to the same switch.
ha-eth-type sets the HA heartbeat packet ethertype (default 8890) to be compatible with the switch.
Example double-tagging switch configuration
The following switch configuration is compatible with FortiGate-7040E HA heartbeat double tagging and with the default TPID of 0x8100.
The FortiGate-7040E HA heartbeat configuration is.
config system ha
set ha-port-dtag-mode double-tagging
set hbdev "1-M1" 50 "2-M1" 50 "1-M2" 50 "2-M2" 50
set hbdev-vlan-id 4086
set hbdev-second-vlan-id 4087
end
Example third-party switch configuration:
Switch interfaces 37 to 40 connect to the M1 interfaces of the FIMs in both FortiGate-7040E chassis.
interface Ethernet37
description **** FGT-7000E M1 HA HB ****
speed forced 10000full
switchport access vlan 660
switchport trunk native vlan 4086
switchport mode dot1q-tunnel
!
interface Ethernet38
description **** FGT-7000E M1 HA HB ****
speed forced 10000full
switchport access vlan 660
switchport trunk native vlan 4086
switchport mode dot1q-tunnel
!
interface Ethernet39
description **** FGT-7000E M1 HA HB ****
speed forced 10000full
switchport access vlan 660
switchport trunk native vlan 4086
switchport mode dot1q-tunnel
!
interface Ethernet40
description **** FGT-7000E M1 HA HB ****
speed forced 10000full
switchport access vlan 660
switchport trunk native vlan 4086
switchport mode dot1q-tunnel
!
Switch interfaces 41 to 44 connect to the M2 interfaces of the FIMs in both FortiGate-7040E chassis.
interface Ethernet41
description **** FGT-7000E M2 HA HB ****
mtu 9214
speed forced 10000full
no error-correction encoding
switchport access vlan 770
switchport trunk native vlan 4087
switchport mode dot1q-tunnel
!
interface Ethernet42
description **** FGT-7000E M2 HA HB ****
mtu 9214
speed forced 10000full
no error-correction encoding
switchport access vlan 770
switchport trunk native vlan 4087
switchport mode dot1q-tunnel
!
interface Ethernet43
description **** FGT-7000E M2 HA HB ****
mtu 9214
speed forced 10000full
no error-correction encoding
switchport access vlan 770
switchport trunk native vlan 4087
switchport mode dot1q-tunnel
!
interface Ethernet44
description **** FGT-7000E M2 HA HB ****
mtu 9214
speed forced 10000full
no error-correction encoding
switchport access vlan 770
switchport trunk native vlan 4087
switchport mode dot1q-tunnel