The FortiGate-7000 includes a number of custom dashboard widgets that provide extra or custom information for FortiGate-7000 systems.
The Security Fabric widget shows the FIMs and FPMs in your FortiGate-7000 system. The primary (or master) FIM is highlighted with a star icon. You can hover over the components in the Security Fabric widget to see each component's host name, serial number, model, firmware version, the system management IP address, and the special HTTPS management port number. The Security Fabric widget also indicates if the modules are synchronized and communicating with the primary (master) FIM.
You can also click on any FIM or FPM and select an option to view the it on a Security Fabric topology or log into it using the management IP address and special HTTPS management port number.
You can create multiple Interface Bandwidth widgets to show traffic that is transmitted and received by any FortiGate-7000 interface. You can create Interface Bandwidth widgets for:
- Any physical interface
- Any link aggregation (LAG) interface
- Any redundant interface
- Any individual member of a LAG or a redundant interface
- Any VLAN interface
- Any IPsec VPN tunnel interface
Interface bandwidth widgets display all of the traffic processed by the interface, independently of how the traffic is load balanced.
You can create individual Interface Bandwidth widgets for each interface that you want to monitor. After you create a widget, you can choose to display traffic for the last hour, 24 hours, or week, updated in real time.
To display similar information from the CLI for physical interfaces, use the following command:
diagnose hardware deviceinfo nic <interface-name>
To display similar information from the CLI for LAG and VLAN interfaces, use the following command:
diagnose netlink interface list <interface-name>
You can create multiple Resource Usage widgets to show CPU use, log rate, memory use, session creation rate, and the number of active sessions. You can create separate widgets for management traffic and data traffic. After you have crated a widget, you can choose to display data for the last 1 minute to 24 hours, updated in real time.
The Sensor Information widget displays FortiGate-7000 temperature, power supply (PSU), and fan speed information. You can click on any item on the widget to display data collected by individual sensors.