Known issues
The following issues have been identified in FortiGate-7000 v5.4.9 build 8110. For inquires about a particular bug, please contact Customer Service & Support.
Bug ID | Description |
---|---|
501764 | FortiGate-7000 v5.4.9 is not currently supported by FortiManager and FortiAnalyzer. Support will be added to a future FortiManager and FortiAnalyzer release. |
385136 | The M1 and M2 interface LEDs light after inserting certain transceivers, whether or not the transceiver is connected to a network. |
506472 | Shutting down an interface that is part of a LAG mail cause a failover. This occurs because the interface appears to be disconnected so the LAG has fewer links. You can work around this issue by removing the interface from the LAG before shutting it down. |
460967 | The Unit Operation widget does not accurately show the number of sessions running on all FPM modules. |
501753 | Under very high traffic conditions, the IPS fail open and cause cluster flapping . |
502119 | In some cases, DLP does not block PDF and PPT files over Google drive. |
444107 | NFS v2/v3 mount over UDP may fail. |
502343 | On an FIM, the diagnose load-balance switch cmd command output shows increasing Sw_Tx_Drop_Packets and Sw_Rx_Drop_Packets counters. |
449298 | FortiAnalyzer reports incorrect FortiGate-7000 resource utilization information. |
493475 | Error messages appear on the Firewall Address GUI page. |
422404 | FPMs cannot communicate with the configured FortiAnalyzer if the source-ip is set to the
IP address of a management interface. |
459424 | The VDOM list GUI page does not show correct CPS, CPU, and memory usage for each VDOM. |
489949 | FIMs may send RTP (UDP/9000) traffic intermittently to the wrong FPM. |
459413 | HA remote IP monitoring using the pingserver-monitor-interface, pingserverfailover-threshold , and pingserver-flip-timeout does not work. |
493850 | GTP traffic statistics are not displayed correctly for the mgmt interface. |
414651 | Data displayed by some diagnose commands is not synchronized to all modules. |
491439 |
The route-ttl option is missing for the HA configuration. |
404811 | Dynamic routing entries display incorrectly on the Routing Monitor. |
441228 | Adding an LDAP server from any FIM may fail because the FortiGate-7000 can't communicate with the LDAP server to test the connection. The workaround is to add the LDAP server from an FPM. |