IPsec VPN notes and limitations
FortiGate-6000 and 7000 for FortiOS 6.4.6 FortiOS 6.2.7 supports the following features for IPsec VPN tunnels terminated by the FortiGate:
-
Interface-based IPsec VPN (also called route-based IPsec VPN) is supported. Policy-based IPsec VPN is not supported.
-
Static and dynamic routing (BGP, OSPF, and RIP) over IPsec VPN tunnels is supported.
-
The FortiGate-6000 and 7000 use load balancing to select an FPC or FPM to terminate traffic for a new tunnel instance and all traffic for that tunnel instance is terminated on the same FPC or FPM. You can optionally use the IPsec tunnel phase 1 configuration to select a specific FPC or FPM to terminate all tunnel instances started by that phase 1.
-
When an IPsec VPN tunnel is initialized, the SA is synchronized to all FPCs or FPMs in the FortiGate-6000 or 7000, or in both FortiGate-6000s and 7000s in an HA configuration.
-
Site-to-Site IPsec VPN is supported.
-
Dialup IPsec VPN is supported. The FortiGate-6000 or 7000 can be the dialup server or client.
-
Policy routes cannot be used for communication over IPsec VPN tunnels.
-
VRF routes cannot be used for communication over IPsec VPN tunnels.
-
IPv6 clear-text traffic (IPv6 over IPv4 or IPv6 over IPv6) is not supported.
-
IPsec SA synchronization between HA peers is supported.
-
Traffic between IPsec VPN tunnels is supported.