Change log
| Date | Change description |
|---|---|
|
July 24, 2023 |
New section, FortiGate-6000 IPsec load balancing EMAC VLAN interface limitation. |
|
July 10, 2023 |
FortiOS 6.4.14 document release. |
|
June 12, 2023 |
FortiOS 6.4.13 document release. |
|
March 10, 2023 |
FortiOS 6.4.12 document release. |
|
January 16, 2023 |
Corrected information about controlling SNAT port partitioning behavior, see Controlling SNAT port partitioning behavior. Added more information to FortiOS features that are not supported by FortiGate-6000 v6.4.10 about the FortiGate-6000 not supporting IPv6 clear text traffic over IPv4 or IPv6 IPsec tunnels. |
|
November 30, 2022 |
FortiOS 6.4.10 document release. Using HA reserved management interfaces to manage individual cluster units in a virtual clustering configuration now works as expected. This limitation has been removed from Limitations of FortiGate-6000 virtual clustering. |
|
November 2, 2022 |
Added more information to describe why in a virtual clustering configuration, using HA reserved management interfaces to manage individual cluster units is not supported, see Limitations of FortiGate-6000 virtual clustering. New section Configuring a FortiGate-6000 to operate in FIPS-CC mode. Corrected the information in SSL mirroring support. |
|
October 20, 2022 |
Changes to the FGSP content, see FortiGate-6000 FGSP and the following pages. |
|
August 17, 2022 |
Corrected the description of the Added information about what happens to the RAID configuration of a FortiGate-6301F or 6501F after installing firmware from the BIOS. See Installing firmware from the BIOS after a reboot. |
|
May 4, 2022 |
Changes to the following sections to correctly describe creating a LAG consisting of the HA1 and HA2 interfaces to improve FGSP session synchronization performance: |
|
March 4, 2022 |
New section: Maximum number of flow rules limited by hardware. |
|
February 22, 2022 |
Minor fixes throughout the document. |
|
February 18, 2022 |
FortiOS 6.4.8 document release. |
|
December 9, 2021 |
Misc. changes throughout the document. |
|
October 20, 2021 |
Minor fixes throughout the document. |
| October 7, 2021 | FortiOS 6.4.6 document release. |
|
September 10, 2021 |
Both FortiGate-6501Fs or FortiGate-6301Fs in an FGCP cluster must have the same number of active hard disks and the same RAID configuration. For more information, see Before you begin configuring HA and Basic FortiGate-6000 HA configuration. |
|
June 21, 2021 |
New section: VLAN ID 1 is reserved. Added information about support for load balancing sessions with the |
|
March 4, 2021 |
Added a note about requiring the Security Fabric to be enabled for normal operation to Confirming startup status. Some fixes to GUI descriptions. Added notes about changing the VDOM mode and HA, for example Before you begin configuring HA. Corrections to information about handling fragmented packets, see Load balancing TCP, UDP, and ICMP sessions with fragmented packets. |
|
January 22, 2021 |
Added information about FortiGate-6000F hardware generation 1 and generation 2, see FortiGate-6000 series hardware generations. |
|
December 14, 2020 |
More information about support for the dedicated management interface feature added to FortiOS features that are not supported by FortiGate-6000 v6.4.2. |
|
December 7, 2020 |
New section: More ARP queries than expected for one device - potential issue on large WiFi networks. |
| November 20, 2020 | FortiOS 6.4.2 document release. |