Fortinet white logo
Fortinet white logo

FortiGate-6000 Handbook

IPv4 and IPv6 ECMP load balancing

IPv4 and IPv6 ECMP load balancing

You can use the following command to configure the IPv4 ECMP load balancing method for a VDOM:

config system settings

set v4-ecmp-mode {source-ip-based | weight-based | source-dest-ip-based}

end

Note

The FortiGate-6000F does not support usage-based ECMP load balancing.

See this link for information about how to support IPv6 ECMP load balancing: Technical Tip: ECMP – Load balancing algorithms for IPv4 and IPv6.

IPv4 and IPv6 ECMP load balancing

IPv4 and IPv6 ECMP load balancing

You can use the following command to configure the IPv4 ECMP load balancing method for a VDOM:

config system settings

set v4-ecmp-mode {source-ip-based | weight-based | source-dest-ip-based}

end

Note

The FortiGate-6000F does not support usage-based ECMP load balancing.

See this link for information about how to support IPv6 ECMP load balancing: Technical Tip: ECMP – Load balancing algorithms for IPv4 and IPv6.