Add trusted hosts

FortiExtender OS enables you to add trusted hosts so that administrators of the hosts can connect to it (the FortiExtender device) via the IP/network. You can specify any IPv4 address or subnet address and netmask from which an administrator can connect to the FortiExtedner.

Each administrator can create up to 10 trusted hosts, which can access the device from any IPv4 address by default.

To add trusted hosts:

FX201E5919000054 # config system admin

FX201E5919000054 (admin) # edit admin

FX201E5919000054 (admin) # show

edit admin

set accprofile super_admin

set password ENC $5$Ht4I..iMtoqzQdJn$tA/wEHn8yAs8Ap19pcBrYE6O92jEI9OnDSY6Y/ujJ9B

set trusthost1 192.168.1.115

set trusthost2

set trusthost3 192.168.2.0/24

set trusthost4

set trusthost5

set trusthost6

set trusthost7

set trusthost8

set trusthost9

set trusthost10

next

Parameter	Description
edit <usernaem>	Specify the admin username.
set accprofile	Specify the access profile name.
set password	Specify the admin user password.
set trusthost1	Specify the IPv4 address or subnet address/netmask of the host from which the administrator connects to the device.
set trusthost2	See "trusthost1" above.
set trusthost3	See "trusthost1" above.
set trusthost4	See "trusthost1" above.
set trusthost5	See "trusthost1" above.
set trusthost6	See "trusthost1" above.
set trusthost7	See "trusthost1" above.
set trusthost8	See "trusthost1" above.
set trusthost9	See "trusthost1" above.
set trusthost10	See "trusthost1" above.