View routing configurations
Use the following commands to view routing configurations.
View routing targets:
get router info target
== [ target.lo ]
device : lo
next-hop : 0.0.0.0
route type : automatic
routing-table : target.lo.rt.tbl
reference counter : 0
== [ target.lan]
device : lan
next-hop : 192.168.10.99
route type : automatic
routing-table : target.lan.rt.tbl
reference counter : 0
== [ target.vwan1 ]
device : vwan1
next-hop : 0.0.0.0
route type : automatic
routing-table : target.vwan1.rt.tbl
reference counter : 0
View PBR configurations:
get router info policy
== [ vwan1-pbr ]
seq : 100
status : enable
input-interface :
src : 192.168.2.0/24
src-addr :
dst :
dst-addr :
service :
target : target.vwan1
routing-table : target.vwan1.rt.tbl
comment :
View routing tables:
get router info routing-table all
Codes: K - kernel, C - connected, S - static
* - candidate default
|
* 0.0.0.0/0 is the default routing. |