Capwap mode
In CAPWAP IP pass-through mode, the FortiExtender is managed by a FortiGate, and traffic is forwarded via the CAPWAP tunnel between the FortiGate and the FortiExtender. Refer to FortiGate documentation on how to manage a FortiExtender on a FortiGate. Once a FortiExtender is managed by a FortiGate, the following configurations will be synced from the FortiGate and generated automatically.
Configurations On FortiExtender
The ingress-intf
in system management setting is set automatically, and cannot be edited.
config system management fortigate
set ingress-intf lan
end
Capwap interface
The capwap
interface is created automatically, and cannot be edited or removed.
config system interface
edit capwap1
set type capwap
set rid 1
next
end
Virtual wire pair
Configurations of the virtual wire pair are created automatically. They cannot be edited it or removed. These configurations specify the mapping of the LTE interfaces and the capwap
interfaces. For example, 'set lte1-mapping capwap1'
means the traffic from the capwap1
interface will be sent out by the lte1
interface.
config system virtual-wire-pair
set lte1-mapping capwap1
end