Configure OSPF GUI

Take the following general steps to configure OSPF from the FortiExtender GUI:

1. Go to Router page.
2. Create prefix list.
3. Create route-map.
4. Go to OSPF page:

• For OSPF settings, enable status and add the router-id.
• For OSPF Area, create Area "0.0.0.0 ".
• For OSPF Network, create the network to add the network prefix.
• For OSPF Interface, create the interface.
• For OSPF Redistribute, add created the route-maps for redistributing the connected and static routes to the OSPF domain.

Refer to the illustrations below.