Known issues
The following issues have been identified in FortiEdge Cloud version 25.3. For inquiries about a particular issue, or to report an issue, visit the Fortinet Support website.
|
Issue ID |
Description |
|---|---|
| 1200714 | Running the execute debug command on a device with a mapped wireless interface causes the debugging to fail. |
| 1200282 | After performing Swap Profile operation on a deployed FX212F device, its deployment status on the in-service page remains in Syncing state. |
| 1200705 | By default, a loopback IP is set as a trusted host in credential plans. If this IP is not removed, logins to the device fail. |
| 1200704 | The minimize option for the Console is not available in the Inservice and OBM Access Console views. |
| 1200696 | The FEX200F platform profile does not include port5, even though the device physically has ports 1 through 5. |
| 1174115 | Though the scheduled upgrade template was set to update the FortiAP to the latest firmware, the device does not upgrade. |
| 1087878 | After FortiSwitch deployment, some fields on the Diagnostics page are not updated for up to 15 minutes. |
|
1201180 |
The Scheduled Upgrade Status page under Monitor menu is not presented in a graph format. |