Configuring the Scanner (fdevsec.yaml)

Create the fdevsec.yaml file (or you may have downloaded it in Adding a New Application. Check-in or add this file into the root folder of the application source code.

Note: Do NOT modify the name and format of this file.

FortiDevSec automatically detects your application languages and runs the relevant scans, SAST, SCA, and Secret. However, to run DAST scans additional parameters are required in fdevsec.yaml, these are described later on in this section. You can also optionally add advanced settings to fdevsec.yaml file as per your requirements.

The following is a sample fdevsec.yaml file, the contents of this file vary based on different application scanning requirements.

version: v1

id: org: 6a4d32db-6751-441a-88fe-9b4793717cde app: aa8a393b-afc6-47d7-84d2-b7011f1d0012

# Optional parameters.
scanners: - sast - dast - secret - sca

languages: - python - javascript

dast: url: https://your.url.com fortipentest_scanner: true #true|false full_scan: true #true|false

resource: serial_scan: false #true|false

The following are the mandatory and optional parameters for fdevsec.yaml.

Parameter	Description
Mandatory parameters
org	A unique ID associated with your organization.
app	A unique ID that identifies the applications within the organization.
Optional Parameters
scanners	This identifies the type of scanner to test the applications. The supported values are sast, dast, sca, and secrets. Notes: If this parameter is unspecified, FortiDevSec runs only static scans. If a DAST URL is specified then a DAST scan runs along with SAST. Else, only the static scans are run.
languages	This identifies the language of the source code. The supported values are java, javascript, python, golang, php, ruby, C++, and C. FortiDevSec automatically detects the language if this parameter is not specified.
dast	Specify these parameters if you intend running a DAST scan on your application. `url` - The URL where your application is hosted. `full_scan` - The supported values are true and false (default). When set to true, a full DAST scan is run and when set to false, a basic scan is run. `fortipentest_scanner` - The supported values are true and false (default). When set to true, FortiPenTest scanner is used. Else, the default DAST scanner is run. Note: You can configure the FortiPenTest scanner with specific parameters for testing your asset (URL). For details on scanner configuration see the FortiPenTest documentation.
resource	When `serial_scan` is set to `true`, the scans run consecutively and when set to `false`, multiple scans run parallel.

Note: To scan language files less than 10% of the coverage/threshold in the source code repository, you are required to explicitly specify the languages parameter and all languages under it in fdevsec.yaml file as a part of the SAST.

Configuring the Scanner (fdevsec.yaml)

Create the fdevsec.yaml file (or you may have downloaded it in Adding a New Application. Check-in or add this file into the root folder of the application source code.

Note: Do NOT modify the name and format of this file.

The following is a sample fdevsec.yaml file, the contents of this file vary based on different application scanning requirements.

The following are the mandatory and optional parameters for fdevsec.yaml.

Parameter	Description
Mandatory parameters
org	A unique ID associated with your organization.
app	A unique ID that identifies the applications within the organization.
Optional Parameters
scanners	This identifies the type of scanner to test the applications. The supported values are sast, dast, sca, and secrets. Notes: If this parameter is unspecified, FortiDevSec runs only static scans. If a DAST URL is specified then a DAST scan runs along with SAST. Else, only the static scans are run.
languages	This identifies the language of the source code. The supported values are java, javascript, python, golang, php, ruby, C++, and C. FortiDevSec automatically detects the language if this parameter is not specified.
dast	Specify these parameters if you intend running a DAST scan on your application. `url` - The URL where your application is hosted. `full_scan` - The supported values are true and false (default). When set to true, a full DAST scan is run and when set to false, a basic scan is run. `fortipentest_scanner` - The supported values are true and false (default). When set to true, FortiPenTest scanner is used. Else, the default DAST scanner is run. Note: You can configure the FortiPenTest scanner with specific parameters for testing your asset (URL). For details on scanner configuration see the FortiPenTest documentation.
resource	When `serial_scan` is set to `true`, the scans run consecutively and when set to `false`, multiple scans run parallel.

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Unified SASE

Single Vendor SASE

Cloud Network Security

Secure Endpoint Connectivity

Web Application / API Protection

Security Operations

Security Operations Automation

Identity

Early Detection & Prevention

Secure Networking

Hybrid Mesh Firewall

NOC Management

LAN

WAN

Communication & Surveillance

Unified SASE

Single Vendor SASE

Secure Endpoint Connectivity

Cloud Network Security

Cloud-Native Security

Web Application / API Protection

Security Operations

Security Operations Automation

Endpoint

Data Protection

Identity

Email

Early Detection & Prevention

Expert Services

Edge Firewall

Orchestration & management

SD Branch

Application Delivery

Single Vendor SASE

Secure Endpoint Connectivity

Secure Private Access

Thin Edge

Identity

Application Gateway

Enterprise Asset Management

Endpoint Agent

Agentless Security Posture

Identity

Wireless

Switching

Identity

Privilege Acccess Management

Next Generation Firewall

Orchestration & management

Expert Services

All

All

Account Management

SAAS Management

SAAS Application Security

Managed Services

Platform as a service (PAAS)

Other SAAS Services

4D Pillars

Cloud

Popular Solutions

User Guide

Configuring the Scanner (fdevsec.yaml)