Integrate FortiDeceptor with FortiGate over Fabric v7.2.4

This topic describes how to integrate FortiDeceptor with FortiGate over Fabric in FortiOS versions 7.2.4 .

FortiGate 7.2.1 has a bug which prevents adding and displaying the FortiDeceptor information widgets in the dashboard.

Integrate FortiDeceptor with FortiGate over Fabric:

1. Configure the Fabric Connector on FortiGate.
2. Configure the upstream FortiDeceptor.
3. Authorize FortiDeceptor on FortiGate.
4. Configure the automation on FortiGate.
5. Create a stitch for manual block on FortiGate.
6. Create a stitch for manual unblock.
7. Check the quarantine status in FortiDeceptor.
8. Check quarantine status on FortiGate.

1. Configure the Fabric Connector on FortiGate

1.1 Create the administrator profile in FortiGate

1. In FortiGate, go to System > Admin Profiles.
2. Select prof_admin or super_admin and click Create New. The New Admin Profile page opens.
3. Configure the profile Access Permissions. The following are the minimum required permissions.

   Access Control	Permissions
   Security Fabric	Read/Write
   FortiView	Read
   User & Device	Read/Write
   Firewall	Read
   Log & Report	Read
   Network	Read
   System	Read/Write
   Security Profile	Read
   VPN	Read
   WAN Opt & Cache	Read
   WiFi & Switch	Read

   

4. Click OK.

1.2 Configure the Fabric Connector using the FortiGate profile

Enable the Security Fabric. For more information, see Configuring the root FortiGate and downstream FortiGates.

1. Go to Security Fabric > Fabric Connectors.
2. Click the Security Fabric Setup tile and click Edit. The Security Fabric Settings window opens.
3. Configure the following settings and click OK.

   Security Fabric role	Select Serve as Fabric Root.
   Allow downstream device REST API access	Enable. Enabling Allow downstream device REST API access is mandatory.
   Administrator profile	Select the profile you create in Step 1.1 Create the administrator profile in FortiGate.

   

2. Configure the upstream FortiDeceptor

1. In FortiDeceptor, go to Fabric > Quarantine Integration.
2. Configure the Fabric Upstream settings and click Apply.

   Enabled	Enable.
   Upstream IP address	Enter the IP of the upstream FortiGate
   Quarantine Via Upstream	Enable.

   

3. Authorize FortiDeceptor on FortiGate

3.1 Update the device status

1. Go to System > Fabric Management.
2. Select the FortiDeceptor with a status of Waiting for authorization and click "Authorize.

   

3.2 Add the fabric device widget in FortiGate Dashboard

1. Go to Dashboard > Status and click Add Widget. The Add Dashboard Widget menu opens.
2. Under Security Fabric, click Fabric Device.

   

3. From the Device dropdown, select the FortiDeceptor.

   

4. Configure the other settings and click Add Widget.

3.3 Monitor the FortiDeceptor widgets on FortiGate

Use the FortiDeceptor Fabric Device widget to monitor FortiDeceptor System Information and Deception Decoys information.

4. Configure the automation on FortiGate

4.1 Create Stitch for automated quarantine on FortiGate side

1. Go to Security Fabric >Automation.
2. In the banner click Action.
3. Click Create New and then click IP Ban. The Create New Automation Action page opens.

   

4. Enter a descriptive name Name such as fdc_ban-ip and a Description such as For fabric and click OK.

   

4.2. Create a trigger for automated quarantine

1. In FortiGate go to Fabric > Automation.
2. In the banner, click Trigger.
3. Click Create New and then click the Fabric Connector Event tile.
4. Configure the following settings, and click OK.

   Name	Give the connector a descriptive name such as FDC_Insider_Threat.
   Description	Enter a description such as FDC mitigation.
   Connector	Select the upstream FortiDeceptor device.
   Event name	Select Insider Threat.

   

4.3 Create a stitch for automated quarantine

1. In FortiGate go to Security Fabric > Automation.
2. In the banner, click Stitch and then click Create New.
3. Give the Stitch a descriptive name such as FDC_ban.
4. Click the Trigger tile and select the trigger you created in Step 4.2. Create Trigger for automated quarantine (FDC_Insider_Threat).
5. Click the Action tile and select the Action you created (fdc_ban-ip).

   

5. Create a stitch for manual block on FortiGate

5.1 Create an Action for manual block

1. In FortiGate go to Security Fabric > Automation.
2. In the banner, click Action.
3. Click Create New and then click the IP Ban tile.
4. Give the Action a descriptive Name such as ipban and enter a Description such as block the IP and click OK.

   

5.2 Create a trigger for manual block

1. In FortiGate, go to Security Fabric > Automation.
2. In the banner, click Trigger;
3. Click Create New and then click the Fabric Connector Event tile.
4. Configure the following settings and click OK.

   Name	Enter a descriptive name such as manual-ban.
   Connector	Select the downstream FortiDeceptor device.
   Event Name	Select Notify Ban.

   

5.3 Create a stitch for manual block

1. Go to Security Fabric > Automation.
2. In the banner, click Stitch, and then click Create New.
3. Give the Stitch a descriptive name such as FDC_Manual_Block.
4. Click the Trigger tile and select the trigger you created in 5.2 Create Trigger for manual block (manual-ban).
5. Click the Action tile and select the Action you created in Step 5.1 Create Action for manual block (ipban)

6. Create a stitch for manual unblock

6.1 Create an Action for manual unblock

1. In FortiGate go to Security Fabric > Automation.
2. In the banner, click Action.
3. Click Create New and then scroll down and click the CLI Script tile.
4. Give the action an descriptive Name such as unblock.
5. In the CLI Script > Script field enter the following command and click OK.

   diagnose user banned-ip delete src4 %%log.srcip%%

   

6.2 Create a trigger for manual unblock

1. In FortiGate, go to Security Fabric > Automation.
2. In the banner, click Trigger
3. Click Create New, then configure the following settings and click OK.

   Name	Give the trigger a descriptive name such as Trigger-unban.
   Connector	Select the downstream FortiDeceptor device.
   Event name	Select Notify Unban.

6.3 Create a stitch for manual unblock

1. Go to Security Fabric > Automation.
2. In the banner, click Stitch, and then click Create New.
3. Give the Stitch a descriptive name such as FDC_Manual_Unblock.
4. Click the Trigger tile and select the trigger you created in 6.2 Create Trigger for manual unblock (unblock) .
5. Click the Action tile and select the Action you created in Step 6.1 Create Action for manual unblock (Trigger-ban).

7. Check the quarantine status in FortiDeceptor

1. In FortiDeceptor, go to Fabric > Quarantine Status.
2. For Type > Auto quarantine, verify the Status is Quarantined.
3. (Optional) Trigger a manual block.
   1. Select a device with Type > Manual quarantine.
   2. In the toolbar, click Block.

8. Check quarantine status on FortiGate

To view the quarantine status with the FortiGate GUI:

Go to Dashboard > Users & Devices and expand the Quarantine widget.

To view quarantine status with FortiGate CLI:

Run the following command:

diagnose user quarantine list

To view the debug log for quarantine with the FortiGate CLI:

Run the following command:

diagnose debug en