Fortinet black logo

System Commands

Copy Link
Copy Doc ID d226064e-22b9-11eb-96b9-00505692583a:78892
Download PDF

System Commands

Command

Description

reboot

Reboot the FortiDeceptor. All sessions are terminated, the unit goes offline, and there is a delay while it restarts.

shutdown

Shut down the FortiDeceptor.

config-reset

Reset the configuration to factory defaults. Event and incident data, and installed VM images are kept.

data-purge

Purge the detection results from the database, including deployment settings, events, incidents, and alerts.

factory-reset

Reset the FortiDeceptor configuration to factory default settings. All data is deleted. Installed VM images are kept.

status

Display the FortiDeceptor firmware version, serial number, system time, disk usage, image status, and RAID information.

fw-upgrade

Upgrade or re-install the FortiDeceptor firmware or deception VM image via Secure Copy (SCP) or File Transfer Protocol (FTP) server.

See fw-upgrade for details.

reset-widgets

Reset the GUI widgets.

iptables

Enable/disable IP tables.

See iptables for details.

dcvm-confirm-id

Set confirm ID for Windows deception VM activation.

See dcvm-confirm-id for details.

dcvm-license

List the license information for deception VMs using the -l option.

dcvm-status

Display the status for deception VMs.

dcvm-reset

Activate and initialize VM images. This is useful when you need to rebuild a broken VM image.

The default resets all VMs or you can specify a VM name with -n <VM name>.

dcimg-status

Display the status of deception images.

set-maintainer

Enable or disable the maintainer account.

See set-maintainer for details.

remote-auth-timeout

Set Radius or LDAP authentication timeout.

See remote-auth-timeout for details.

log-purge

Delete all system logs.

vm-firmware-license

Download and install the firmware license file from a server.

See vm-firmware-license for details.

vm-resize-hd

After changing the virtual hard disk size on the hypervisor, execute this command to make the change recognizable to the firmware.

This command is only available for VM models.

dmz-mode

Enable or disable the DMZ mode to deploy the unit in a DMZ environment.

fdn-pkg

Display information about FortiGuard upgradeable engine packages.

test-network

Test the network connectivity of firmware.

storage-check

Check storage disk with fsck command.

storage-format

Format storage disk.

System Commands

Command

Description

reboot

Reboot the FortiDeceptor. All sessions are terminated, the unit goes offline, and there is a delay while it restarts.

shutdown

Shut down the FortiDeceptor.

config-reset

Reset the configuration to factory defaults. Event and incident data, and installed VM images are kept.

data-purge

Purge the detection results from the database, including deployment settings, events, incidents, and alerts.

factory-reset

Reset the FortiDeceptor configuration to factory default settings. All data is deleted. Installed VM images are kept.

status

Display the FortiDeceptor firmware version, serial number, system time, disk usage, image status, and RAID information.

fw-upgrade

Upgrade or re-install the FortiDeceptor firmware or deception VM image via Secure Copy (SCP) or File Transfer Protocol (FTP) server.

See fw-upgrade for details.

reset-widgets

Reset the GUI widgets.

iptables

Enable/disable IP tables.

See iptables for details.

dcvm-confirm-id

Set confirm ID for Windows deception VM activation.

See dcvm-confirm-id for details.

dcvm-license

List the license information for deception VMs using the -l option.

dcvm-status

Display the status for deception VMs.

dcvm-reset

Activate and initialize VM images. This is useful when you need to rebuild a broken VM image.

The default resets all VMs or you can specify a VM name with -n <VM name>.

dcimg-status

Display the status of deception images.

set-maintainer

Enable or disable the maintainer account.

See set-maintainer for details.

remote-auth-timeout

Set Radius or LDAP authentication timeout.

See remote-auth-timeout for details.

log-purge

Delete all system logs.

vm-firmware-license

Download and install the firmware license file from a server.

See vm-firmware-license for details.

vm-resize-hd

After changing the virtual hard disk size on the hypervisor, execute this command to make the change recognizable to the firmware.

This command is only available for VM models.

dmz-mode

Enable or disable the DMZ mode to deploy the unit in a DMZ environment.

fdn-pkg

Display information about FortiGuard upgradeable engine packages.

test-network

Test the network connectivity of firmware.

storage-check

Check storage disk with fsck command.

storage-format

Format storage disk.